Advance Tabco FT-3015 User Manual
ECONOMY FILLER TABLE
EATURES:
F
TOP is furnished with 1 5/8” sanitary rolled rim edge in front.
Square edges on sides and 1/1/2” splash of single metal
thickness on rear.
Hat channels stud welded to top which reinforces and
maintains a level working surface.
Welded Front to Back Leg Assembly.
CONSTRUCTION:
All TIG welded. Exposed weld areas polished to match
adjacent surfaces.
Entire top mechanically polished to a satin finish.
Top is sound deadened.
Roll formed embossed galvanized hat channels are secured
to top by means of structural adhesive and weld studs.
Gussets welded to support hat sections.
MATERIAL:
TOP: 18 gauge stainless steel type “430” series.
SHELF: Galvanized shelf.
LEGS: 1 5/8” diameter tubular galvanized.
1” Plastic bullet feet.
STAINLESS STEEL
Item #: Qty #:
Model #:
Project #:
Model # Width Length Wt.
FT-3012
FT-3015
FT-3018
FT-3024
30”
30”
30”
30”
12”
15”
18”
24”
24 lbs.
30 lbs.
35 lbs.
48 lbs.
DETAILS and SPECIFICATIONS
TOL ± .500” ALL DIMENSIONS ARE TYPICAL
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
www.advancetabco.com
ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. © ADVANCE TABCO, AUG. 2013
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
O-24
Loading...