Advance Tabco FE11515X, FE4181218RLX, FE3242424RX, FE3182424RLX, FE3182418RLX Installation Manual

Installation Instructions for

FC, FE & FS SERIES SINKS

FS Series

FE Series

FC Series

CHECK FOR CONCEALED DAMAGE

FILE CLAIM WITH DELIVERING FREIGHT CARRIER

Sinks manufactured by ADVANCE TABCO® are designed and constructed for the use of
liquid containment. Suggested applications include Food Preparation, Manufacturing, Cooking,
Laboratory and Service and the like. ADVANCE TABCO® does not recommend product use for activities
employing harsh and active chemicals. Please consult factory regarding unusual applications.

THIS CARTON CONTAINS:

• Sink Unit

• Leg Assembly

• Drains (1 For Each Sink Bowl)

Step 1

Carefully remove contents of carton/crate. Carefully position
sink upside down on a protected surface so you can access the
underside of the sink. Install leg assembly into gussets at each
end (Figure 1).

Figure 1

Step 2

Tighten each Set Screw using 5/32” Allen Wrench (Figure 2).

TOOLS NEEDED (Not Included):

5/32” Allen Wrench

PLEASE NOTE: Some models may require Set
Screws to be inserted into the Set Screw Holes.

Figure 2

☞