Page 1
SMART TABLE MODIFICATIONS
SIZE MODIFICATIONS
____ TA-33 Special Working Height
____ TA-59 36” Wide Equipment Stand
____ TA-6 Extra Length for Standard Tables over 12’
(Tables Over 14’ Require Field Joint TA-57)
____ TA-61 Special Modification Charge
____ TA-65 Enclosed Base Units Over 12’
____ TA-66 Enclosed Base Units Over 12’
____ TA-67 Enclosed Base Units Over 12’
____ TA-78
____ TA-79 Flour Trough (Factory installation only)
____ TA-105 Modify Enclosed Base Table with Drawers to 24” W
____ TA-110 Modify Enclosed Base Table with Drawers to 36” W
____ TA-1 Notch Backsplash For Roll Up Door with Pass-Thru
____ TA-3 Stainless Steel Hat Channel & Gusset Upgrade
____ TA-7 10” Rear Splash
____ TA-8 Column Notch in Rear Splash
____ TA-10 5” Partial Back Splash
____ TA-12 Countertop Edge
____ TA-22 Square Edge Table
Additional Lin. Ft. Past 12’ For Table Mt. Shelf
(For ODS, OTS, TS & DS Shelving only)
TOP MODIFICATIONS
(1 Charge Per Table)
(Open Base Table)
(Sliding Door Units)
Hinged Door Uints)
(Includes Splash)
___ TA-28 Cut-Out For Cold Well
____ TA-30 1-1/2” Side Splash
____ TA-30A 1-1/2” Turn Up For Tables Tops
____ TA-31 5” Side Splash
____ TA-32 10” Side Splash
____ TA-34 Top Cut-Out
____ TA-35 Splash Cut-Out
____ TA-56 5” NSF Partition
____ TA-56A 18” NSF Partition
____ TA-57 Prepare Welded Field Joint
____ TA-57A Bolted Field Joint
____ TA-58 Stepdown to 24” Working Height
(Bolted in field by others)
(Welded in field by others)
____ TA-75 Mitered Edge
____ TA-76 Paint on Sound Deadening
___
_
TA-82 Scrap Chute (
TA-84 Simple Pass-Thru
____
6” dia. opening)
TA-84 Shown
____ TA-87 Enclosed Rear Splash
____ TA-91 Poly Retaining Clips Incudes TA-22
____ TA-93 Wall Brackets (Includes 2. For 5” & 10 1/2” splash only)
____ TA-96A Can Opener Provision for openers w/ Bolt-on Base
(Customer to provide location)
____ TA-96B Can Opener Surface Mount Provision w/4” S/S Tube
for Openers w/o Base
____ TA-96C Can Opener Spacer Plate Provision for Use on
(Customer to provide location)
Tables with Countertop Edge & Can Opener Base
Customer to provide location)
____ TA-100 Bull Nose All Sides of Worktable
____ TA-100ABull Nose All Sides of Shelf
____ TA-101 Rear Tray Lock
____ TA-106 Mirror HI-LITE Edge
____ TA-108 2" Hole with Grommet for Appliance Cord
(Specify Hole Location)
____ TA-112 Hubble Outlet
____ TA-113 Notch Top for Buyout Unit
BASE MODIFICATIONS
____ TA-4 Removable Access Panel
____ TA-5 Curb Mounting Provision
____ TA-13 Pad Lock Hasp
____ TA-15 Provision for Built In Drawer Warmer
____ TA-23 Welded Set-Up Table/Crating
____ TA-24 Shell Crating
____ TA-27 Control Panel (Must add TA-34A or TA-34B)
____ TA-36A Sliding/Hinge Stainless Steel Doors
____ TA-36B Two 1/2 Height Stainless Steel Hinge Doors
____ TA-37 Stainless Enclosed Base
____ TA-39 24” Louvered Hinged Doors
TA-58 Shown
____ TA-62 Duplex Electrical Outlet (Under Flat Top)
____ TA-62A Duplex Electrical Outlet (in VKS Rear Splash)
____ TA-62B Duplex Electrical Outlet
____ TA-62C Duplex Electrical Outlet GFI (Specify Location)
____ TA-62D Doghouse Electrical Outlet Box (Includes Duplex Outlet)
____ TA-64 Urn Trough (Factory installation only)
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
www.advancetabco.com
ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. © ADVANCE TABCO, MARCH 2010
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
(in KSS Rear Splash. Includes 2” Return)
____ TA-40
____ TA-42 Interior Partition (2.5”x30”)
____ TA-43 Filler Panel (3”x30” with Flanged Feet)
NEW YORK GEORGIA TEXAS NEVADA
Remove Undershelf in Cabinet Base For Slide in Buyout
TA-39 Shown
K-1K-1
Page 2
SMART TABLE MODIFICATIONS
____ TA-44
____ TA-45 K.D. Aluminum Glass Rack Slides
____ TA-46 Door Locks
____ TA-48
___
_
TA-55 Remove Back Panel (
TA-70 S/S Tubular Tray Divider (12” sections)
____
____ TA-73 Tubular Tray Slide w/Dropdown
____ TA-74 Solid Tray Slide
____ TA-91 Poly Retaining Clips Includes TA-22 (S/S top table)
____ TA-92 12” Apron (in front of sink)
____ TA-92A 17” Stainless Steel Apron t Cover Sink Bowls and
K.D. Aluminum Pan Rack Slides
(3 slides. Table min. lgth. 3 feet)
12”x12” Cut-Out in Back Panel or
(Stationary Tray Slide Available. Factory installation only)
(6 slides. Table min. lgth. 3 ft.)
Undershelf for Plumbing
on Enclosed Base)
Support Lever Drain Handles
____ TA-109 Rear Flush Finished Inset Panel
TA-109 Shown
____TA-116 Adjustable Enclosed Base Cabinet Mid Shelf
Add to price of Enclosed Base Table with Fixed Mid
Shelf (M) Shelves over 36" in length require multiple
sections with center partition.
SINK MODIFICATIONS
____ TA-107 Vacuum Breaker Holes on Tables
(Includes Backsplash with 2" Return)
UNDERSHELF MODIFICATIONS
LEG MODIFICATIONS
____ TA-16 Galvanized Leg with Plastic Bullet Foot
___
_
TA-19 Flanged Stainless Steel Bullet Feet
____ TA-20 Stainless Steel Leg with S/S Bullet Foot
____ TA-21 Stainless Steel Bullet Foot
____ TA-95 Upgrade 16 Ga. 304 S/S Legs Only
MODIFIED EB-SS-3012
CDS-18-144
US-30-30
DC-1512
TA-11A-L
TA-92
TA-42
UCC-1
TA-34B
TA-92
TA-27
TA-34A
____ TA-9 1-1/2” Turn-Up for Undershelves
____ TA-48
____ TA-94 Upgrade 16 Ga. 304 S/S Undershelf
____ TA-366 Reinforced Understructure For Undershelves
____ TA-9A 1” Turn-Up for all Table Mounted Shelves
____ TA-47 Shelf Mounting Bracket for Existing Table
____ TA-49 Wall Shelf 2” offset
____ TA-60 Special Sizing Charge for Shelves
____ TA-62 Duplex Electrical Outlet (Under Flat Top)
____ TA-62D Doghouse Electrical Outlet Box (Includes Duplex Outlet)
____ TA-71 Heat Lamp Mounting Provision
____ TA-77
____ TA-99 16 Ga. S/S 304 Upgrade for Wall and Over Shelves
____ TA-102
____ TA-103 24” Wide PT Shelf (Mid mount only. PT Series Shelf, see
____ TA-104 Additional Length Over 12’ (Add to 18” Shelf)
12”x12” Cut-Out in Back Panel or
OVERSHELF MODIFICATIONS
Check Minder Shelf Provision
Undershelf for Plumbing
(Factory installation only)
24” x 24” Extension for Microwave or Computer Shelf
(Add to OTS and ODS Shelves. See page 45)
pg. 47. Add to 18” Wide Shelf)
(CU & CDS Shelving Only. Max. Lgth. is 14' as Single Piece)
Duplex Electrical
Outlets
TA-62
TA-62A
TA-62B
TA-62C
TA-56
5" NSF Partition
TA-56A
18" NSF Partition
TA-92 $120 lin. ft.
12" Apron
Doghouse
Duplex Electrical
Outlet
TA-62D
TA-112
Hubble Outlet
Check Minder Shelf Provision
TA-77
TA-75
Mitered Edge
K-1a
Page 3
OP ACCESSORIES
T
___ TA-29 Rear Splash Capping Strip
_
____ TA-41 Poly-Vance 5/8” Cutting Board
____ TA-521 Drop-In urn Trough 1’
___ TA-522 Drop-In urn Trough 2’
_
____ TA-523 Drop-In urn Trough 3’
____ TA-524 Drop-In urn Trough 4’
____ TA-812 2’ Stainless Steel Cutting Surface
____ TA-813 3’ Stainless Steel Cutting Surface
____ TA-814 4’ Stainless Steel Cutting Surface
____ TA-815 5’ Stainless Steel Cutting Surface
____ TA-816 6’ Stainless Steel Cutting Surface
____ TA-817 7’ Stainless Steel Cutting Surface
BASE ACCESSORIES
____ TA-54 Removable Kick Plate
____ TA-63 Removable Shelving
____
OVERSHELF ACCESSORIES
(In addtion to standard shelf)
____ TA-83 Spice Bins
____
POTRACK ACCESSORIES
____ TA-86 Stainless Steel Pot Hooks
____ TA-89 Double Sided Plated Pot Hooks (Package of 4)
____ TA-89A Single Sided Plated Pot Hooks (Package of 4)
____ TA-98 Stainless Steel Flat Bar in lieu of Chain
____
_____ TA-84A Knife Rack for Rolled Rim Tables
TOP ACCESSORIES
____ TA-84B Knife Rack for Poly Top Tables
____ TA-84C Knife Rack for Square Edge Tables
____
____ TA-90 Drawer Adapter
DRAWER ACCESSORIES
(Non-catalog tables. Specify table width)
____ TA-93 Wall Clips (for 5” & 10 1/2” splash only)
___
LEG ACCESSORIES
____ TA-72 Leg to Wall Brace (Set per table)
SMART TABLE ACCESSORIES
Casters
(125 lbs. Load Capacity Per Caster)
____
TA-25 Set of 4
____
TA-25A Set of 6
Add price to Above for:
____
TA-25B Brakes on All Casters
____
TA-25C Upgrade to Caster with
Heavy Duty Urethane Wheels
TA-25
Heavy Duty Casters for
Equipment Stands
TA-255
(1000 lbs. Distributed Weight)
____
TA-255 Super Heavy Duty
set of 4
____
TA-256 Super Heavy Duty
set of 6
All Casters
Ship Via UPS!
REAR SPLASH CAPPING STRIP
BUMPER GUARDS
16 Ga. “304” Stainless Steel
Adhesive Tape Backing
____
TA-29
CHECK MINDER
Check Minder holds checks with ease.
Floating ball mechanism quickly grabs
checks and holds them in place.
Mounts to existing wall or shelf.
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
www.advancetabco.com
ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. © ADVANCE TABCO, MARCH 2010
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
16 ga., 304 Stainless Steel. Bracket Included
____
BG-48 2” x 4” x 48”
____
BG-60 2” x 4” x 60”
Ft.
2’
3’
4’
CORNER GUARDS
16 Ga. “304” Stainless Steel
Adhesive Tape Backing
____
CG-48 2” x 2” x 48”
____
CG-60 2” x 2” x 60”
MODEL
____
CM-24
____
CM-36
____
CM-48
Approx.
Wt.
1.5 lbs.
2.25 lbs.
3 lbs.
K-1b
Loading...