Advance Tabco DTSS6036LX, DTCS7096RX, DTCS7072RX, DTSS6048RX, DTSS6072RX Compatibility

Dish Machine coMpatibility chart

The Following Dish Machines Require SMART FABRICATION™ Modifications For Dishtable Compatibility.

ADS
(American
Dish Machine)

APEX

Autochlor

Blakeslee

Burns

Champion

CMA
(Chemical Methods)
Energymizer

Ecolab

ADC44, ADC66 Sink bowl must be 20” from dish machine. Add DTA-76 to soil dishtable.

HT-25, SS-25 If dish machine is in corner, backsplash must be notched to 4” tall to clear handle. Add DTA-78 to table that’s on

AFC-3D, AF-3D, AF-ES, AFC-ES, AF-W,
L3-DW, L3-DWC, Lxx-3DW, Lxx-3DWC,
5-CD, 5-AG, 5-AG-ES

SEE ECOLAB

AC-44 No sinks or other obstructions within 20” of machine on soil side (add DTA-76) or 10” of machine on clean side.

A4, A5, D2 NO MODIFICATION NEEDED.

D-8, D-9, R-MM-100 If dish machine is in corner, right side backsplash must be notched to 4” tall to clear handle. Add DTA-78 to the

R-L-40, RM50 Must maintain 13” clear on clean side of machine.

R-CC-64, R-LL-80, R-MM-100 No sinks or other obstructions within 13” of machine on clean side.

A2 NO MODIFICATION NEEDED.

DH-5000 Genesis If dish machine is in corner, right side backsplash must be notched to 3” tall to clear handle suggest (but not

44DR, 54, 66DRPW, 70DRFFPW,
76DRPW, 80DRHDPW, 80DRFFPW,
90DRHDPW, DH-2000

64, 84, 86PW, 90FFPW, 100HDPW,
106PW, 110FFPW, 120HDPW

DL-2000 No obstructions within 6” of machine.

D-HB, D-LF, D-FL, DH-1000 NO MODIFICATION NEEDED.

180 Right side sinks bowls must be 12” from dish machine. Add DTA-76 if sink is on right table.

EST-44H, EST-44L, EST-66H, EST-66L Sink bowl must be 12” from dish machine. Add DTA-76 to soil dish table. NO obstructions on clean side

B, AH, C, E-AH, E-AH-EXT, E-C, E-C-EXT,
EST-3D, EST-3D-EXT, EST-C, EST-C-EXT,
EST-AH, EST-C, CB, S-B

EC-44, EC-66, ES-4400, ES-6600, ES-8000 Clean (exit) side no obstructions under table within 12” of machine.

ES-4000, APEX-TSC-Double No modifications for straight thru operation. If used in a corner (ES-4000-CDR or CDL, TSC-Double right or left

front of machine.

NO MODIFICATION NEEDED.

right table.

required) 12” clear on right side table to operate controls. Add DTA-78.

NO MODIFICATION NEEDED.

Must maintain 10” clear on clean (exit) side of machine.

(including channels) within 12” of machine.

NO MODIFICATION NEEDED.

one table backsplash must be notched to 4” tall. Add DTA-78 to right models or left models.

Updated as of 3/1/2016

Electrolux

Eurodib

ET-14 If sink is on right side of dish machine and deeper than 10”, sink must be 16” from machine. Add DTA-76 to soil

ET-44 Right side sinks bowls must be 12” from dish machine. Add DTA-76 if sink is on right table.

WH-44, WH-66 Sink bowl or waste trough must be 14” from machine, regardless of direction flow. Add DTA-76 to soil table.

APEX TSC-V This dish machine has a control box that can be relocated. In some situations, a 9” or deeper bowl on a right

ES-2000, APEX-TSC, Inferno, Typhoon NO MODIFICATION NEEDED.

APEX HT Right side sinks and troughs must be at least 6” from dish machine.

WT44 Sinks and troughs (and all other obstructions) recommended to be 20” from machine. Add DTA-76 if required.

WT65, 504262, 504263, EHT8ILG4,
EHT8ILG8

504252, 504253, 504279, 504280, EHT­8TIELG4, EHT8TIELG8, EHT8IELG4

L21 NO MODIFICATION NEEDED.

L25EK, L25EKDSP Require a special machine opening 20 3/32 K-508A. Front rolled edge needs 1” tall by 2” long flat section at

table if required.

side

If dish machine is in the corner, left side table backsplash and front rolled rim must both be cut down 2” tall, add
DTA-78.

Each table requires an angle spot welded under top along machine lip. Add $75 net per table. For corner
operation, left table requires backsplash notched to 3.5” tall to clear handle. Add DTA-78 to left table if required.

machine, angled at end. Add K-508A. if a corner set up, left side table needs rear splash cut down to 1” for 2”
closest to machine. Add DTA-78.

1

Continued on Page 2 ☛

Continued From Page 1

The Following Dish Machines Require SMART FABRICATION™ Modifications For Dishtable Compatibility.

Fagor

Hobart

Insinger

Intedge

Jackson &
Hoshizaki

Jet Tech

Knight

FI-200W Standard dish tables will NOT work with the dish machine due to depth of machine. Contact Advance Tabco for

AD-120W NO MODIFICATION NEEDED.

FI-120W

AM-12 Right side sink bowls must be 12” from machine. Add DTA-76 if sink is on right side.

AM-14 IF sink is on right side of dish machine and is deeper than 10”, sink must be 16” from dish machine. Add

AM-15 If dish machine is in corner, left side backsplash return must be notched to 4” tall to clear handle, add DTA-78.

C-44/54/64/88, CL44/54/64, CLPS66/76,
CRS-66/76/86/110

SL-23/30,38DDU A special dish machine opening is required. Add DTA-72 to each dish table.

CCS-66/76/86/110, Soil table opening similar to Hobart SL-23 side loader (add DTA-72), clean table opening 22”. Sinks and troughs

CLCS 66/76/86 (and all other obstructions) recommended to be 20” from machine. Add DTA-76 if required.

AM-15T, AM-15VLT, LT-1 NO MODIFICATION NEEDED.

Admiral 44, 66, Speeder 64, 86 Must maintain 24” clear on both sides of machine. Add DTA-76 to soil dishtable.

40-2 Start with BSR series table. Add K-508A to cut hole and install mounting flange. Add sink from page 78 in the

Commander 18-5, CS NO MODIFICATION NEEDED.

18-6 No obstructions within 6” on right side of machine.

Super 106-2 Must maintain 24” clear on exit (clean) side of machine.

DW-50 NO MODIFICATION NEEDED.

CREW Series Clean (exit) side no protrusions below surface within 12” of machine, including sink bowls, troughs and

Tempstar HH Machines built before January 2008, right side sinks bowls must be 12” from dish machine.

Tempstar GPX No changes. Verify where 27.5” wide booster heater will fit on floor under table.

100, 150 Sink bowls on left side of machine must be 12” from dish machine. Add DTA-76 to soil table if required. Left side

TS-44, TSC-44, TS-66, TSC-66 Sink bowl or waste trough must be 14” from machine, regardless of direction flow. Add DTA-76 to soil table.

AJ Series, AJX Series No obstructions (including channels) within 12” on either side of machine. Add DTA-76 to soil table if required.

JWE-2400CUA-L25B,
JWE-2400CUA-R25B

Jackson 10 (round) Start with BSR series table. Add 2 K-508A to cut hole and install mounting flange. Add sink from page 78 in

Conserver XL/XLH/XL2,
Tempstar, 200, JWE-620UA-6B

Conserver XL2C Table exiting machine on front (L or R based on machine) must cut down backsplash to 3” tall. Add DTA-78.

WareForce 44 Left side no obstructions within 14” of machine (including support channels). Add DTA-76 to soil table if

747, F-22 Dish machine newer than 1/2001 no modification required. Older machines add K-508A to each dishtable to

F-22T Right side sink bowls must be 14” from dish machine. Add DTA-76 if sink is on right table.

X35C, X35D NO MODIFICATION NEEDED.

KLE-235D, KLE-117C, KLE-117I, KLE­175GT

Dish Machine coMpatibility chart

Updated as of 3/1/2016

pricing.

NO MODIFICATION NEEDED. - MACHINE IS DISCONTINUED.

- MACHINE DISCONTINUED.

DTA-76 to soil table if required. - MACHINE DISCONTINUED.

If soil dishtable is on left and dish machine is in corner, prerinse sink must move to 12” dish machine.

Sinks and troughs (and all other obstructions) recommended to be 20” from machine. Add DTA-76 if required.
a special dish machine opening (22”) is required. Add K-508A to each table.

Advance Tabco Product and Price Guide if required. If additional length required use DTA-56.

channels. Add DTA-76 to clean table if required.

Add DTA-76 if sink is right table. (Not required for machines with control box on top of machine).

Obstructions on clean side (right for an L machine and left for an R machine) must be 16” from machine

the Advance Tabco Product and Price Guide if required. If additional length required use DTA-56.

NO MODIFICATION NEEDED.

required.

notch front and rear back 1” and lower backsplash to 6” tall. F-22 dish machines made prior to 9/2002 right side
sink bowl must be 14” from dish machine. Add DTA-76 to soil table if required.

- MACHINE DISCONTINUED.

NO MODIFICATION NEEDED.

2

Continued on Page 3 ☛