Advance Tabco DTS-D30-108R User Manual
STAINLESS STEEL
DISHTABLES
DISHLANDING SOIL
NEW Tile Edge Design
10-1/2” EXTRA LARGE
Bold Looking Backsplash
with 2” return and tile edge
ACCESSORIES
Faucet
Wall Shelf
Undershelf
Model #
SPEC-LINE
DTS-D60-72L Shown
Qty
Item #: Qty #:
Model #:
Project #:
pec-Line: 14 ga. 304 Series Stainless Steel Top.
S
16 ga. 304 Stainless Steel Legs Stainless Steel Legs
with Welded Cross Bracing & Stainless Steel Bullet Feet.
UPGRADED!
Standard: 16 ga. 304 Stainless Steel Legs Stainless Steel Legs
Super Saver: 16 ga. 304 Series Stainless Steel Top.
FEATURES:
Tile edge for ease of installation.
STANDARD & SUPERSAVER SOIL section features 5” deep sink bowl.
SPEC-LINE SOIL section features 8” deep sink bowl.
Dishtable system consists of SOIL and CLEAN sections.
Table is furnished with 10-1/2” splash with a 2” return.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a satin finish.
Stainless Steel Gussets welded to a stainless steel support channel.
MECHANICAL:
Faucet holes in SPLASH punched on 8” centers, faucet not included.
Waste drain is 1 1/2” IPS basket type and is included.
16 ga. 304 Series Stainless Steel Top.
with Welded Cross Bracing & Stainless Steel Bullet Feet.
Galvanized Legs with Plastic Bullet Feet.
Nominal sizing on all
dishtables for ease of
installation.
www.advancetabco.com
14 Gauge 304 16 Gauge 304 16 Gauge 304
16 Ga. Stainless Steel Legs Stainless Steel Legs Galvanized Legs
Nominal
Size
4 Ft.
5 Ft.
6 Ft.
7 Ft.
8 Ft.
9 Ft.
10 Ft.
12 Ft.
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
“L”
47”
59”
71”
83”
95”
107”
119”
143”
SPEC-LINE STANDARD SUPER SAVER
DTS-D30-48L or R
DTS-D30-60L or R
DTS-D30-72L or R
DTS-D30-84L or R
DTS-D30-96L or R
DTS-D30-108L or R
DTS-D30-120L or R
DTS-D30-144L or R
DTS-D70-48L or R
DTS-D70-60L or R
DTS-D70-72L or R
DTS-D70-84L or R
DTS-D70-96L or R
DTS-D70-108L or R
DTS-D70-120L or R
DTS-D70-144L or R
DTS-D60-48L or R
DTS-D60-60L or R
DTS-D60-72L or R
DTS-D60-84L or R
DTS-D60-96L or R
DTS-D60-108L or R
DTS-D60-120L or R
DTS-D60-144L or R
Approx.
Wt.
180 lbs.
205 lbs.
230 lbs.
240 lbs.
255 lbs.
320 lbs.
380 lbs.
390 lbs.
P-7
34"
3"
1
1/2"
26 1/2"
2
"
10 1/2"
44 1/2"
37"
10"
17"
20x20x5"
Sink
L
C
L
C
10 1/2"
2
"
44 1/2"
1
1/2"
17"
26 1/2"
20x20x8"
Sink
34"
L
C
3"
37"
10"
L
C
C
ross
Brace
C
ross
Brace
F
aucet
(Standard
Series Only)
DIMENSIONS and SPECIFICATIONS
6
7"
L
38"
10"
3
0"
2
"
1
1/2"
2
1 3/8"
2
0"
6
"
20"
2
0"
67"
L
1 1/2"
38"
10"
20"
2
"
6
"
2
1 3/8"
30"
TOL ± .500” ALL DIMENSIONS ARE TYPICAL
SEE DISH MACHINE COMPATIBILITY CHART TO ENSURE PROPER FIT
Dish Machine Compatibility Chart can be found on our website at www.advancetabco.com under “Product Support”
DISH
MACHINE
OPERATOR
DISHLANDING SOIL LEFT
SPEC-LINE
STANDARD & SUPER SAVER
DISHLANDING SOIL RIGHT
CUSTOMIZE YOUR OWN SYSTEM
by Ordering Optional Accessories from our
PRODUCT & PRICE GUIDE
Splash Detail
P-7a
200 Heartland Boulevard, Edgewood, NY 11717-8380
Description SPEC-LINE STANDARD SUPER SAVER
Material
1 5/8” Dia. Legs
Gussets
Bullet Feet (1” adj.)
Cross Bracing
Prerinse Bowl Depth
Prerinse Basket
14 Ga. 304 Series
Stainless Steel
Stainless Steel
Stainless Steel
Welded
8”
Included
16 Ga. 304 Series
Stainless Steel
Stainless Steel
Stainless Steel
16 Ga. 304 Series
Stainless steel
Welded
5”
Optional
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, DECEMBER 2009
galvanized
Plastic
Optional
5”
Optional
Loading...