Advance Tabco DTA-100, DTA-61 User Manual

Q-1

K-550

K-460

Project #:

Item #:

or

DTA-99A

DTA-99B

DTA-84

DTA-77

K-452

K-550

SMART DISHTABLE MODIFICATIONS

DTA-70

A-61
DT

K-37

K-440

NEW YORK GEORGIA TEXAS NEVADA

[phone] [phone] [phone] [phone]

Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]

www.advancetabco.com

SMART DISHTABLE MODIFICATIONS & ACCESSORIES

SMART MODIFICATIONS

QTY.

_____ K-23

_____ K-24

_____ K-37

_____ K-57

_____ K-77

_____ K-440

_____ K-452

_____ K-453

_____ K-454

_____ K-456

_____ K-460

_____ K-461

_____ K-472

_____ K-495

_____ K-508

_____ DTA-40

_____ DTA-45

Welded Set-Up/Crated

Shell Crating

Anti-siphon Vacuum Breaker Hole

Welded field Joint (Welded in field by others)

Splash Cut-Out (

Waste Trough Installation welded into table and furnished with a 2”
deep removable basket

Control Bracket 6 x 9

Control Bracket 14 x 16

Side Splash

Scrap Block installed (Includes Rubber Scrap Block)

Disposal Cone welded into table and furnished with 6 x 9 Control
Bracket & Faucet Holes (Supplied by others)

Disposal Collar welded into sink bowl and furnished with 6 x 9 control
bracket

Special Faucet Hole location

Turn Down Backsplash

Special Size or Modification

Drain Hole (For sorting Table)

Scrap Trough welded to dump sink. Maximum scrap trough
length is 5 feet.

(for 20” x 20” x 8” bowl Spec-line soil S30 series only)

(Consult factory for trough lengths exceeding 5 feet.

Pipe Chase)

Supplied by others)

(

)

QTY.

_____ DTA-46

_____ DTA-55

_____ DTA-56

_____ DTA-61

_____ DTA-66

_____ DTA-70

_____ DTA-72

_____ DTA-75

_____ DTA-76

_____ DTA-77

_____ DTA-78

_____ DTA-84

_____ DTA-99A

_____ DTA-99B

_____ DTA-99C

Inside Mitered Corner

Column Notch (Includes Splash)

Additional Length on 59” side of Korner or Straight Tables

Deep Drawn Prerinse Sink Assembly - 20” x 20” x 8” Stainless Steel
Sink Bowl Removable. Perforated Stainless Steel Basket with
Slide Bar and includes Basket Type Drain.

(Available as Upgrade on Standard and SuperSaver Soil Tables only)

Provision for Dishlanding on Straight Soil Table (Min 4’)

Install Booster Heater Brackets (

Provision for Side Loader

Provision for Limit Switch (

Move Prerinse Sink To Conform To Dishmachine Requirements.
Please Specify Machine When Placing order

Modify Machine Opening To 22” To Conform To Dishmachine
Requirements. Please Specify Machine When Placing order

Notch in Backsplash Return To Clear Handle

Please Specify Machine When Placing Order.

Simple Pass-Thru (Specify wall thickness - minimum length 36”)

16” x 20” x 12” Deep Drawn Sink Bowls

20” x 20” x 12” Deep Drawn Sink Bowls

10” x 14” x 5” Dump Sink

Brackets By Others)

Limit Switch By Others)

(S30 Models No Charge)

ACCESSORIES

QTY.

_____

K-4 Lever Drain Bracket

_____

K-397 Wall Bracket (Requires K-495)

_____

K-455C Stainless Steel Sink Cover 16"x20"

_____

K-455E Stainless Steel Sink Cover 20"x20"

_____

K-475 S/S Leg with Stainless Steel Bullet Foot

_____

K-478 Stainless Steel Bullet Foot

_____

K-488 Flanged S/S Bullet Foot

_____

K-494 S/S Welded Leg Assembly with S/S Feet

ubular Rack Storage

_____

K-550 Stainless Steel

T

QTY.

_____

DTA-53 SPEC-LINE Heavy Duty Prerinse Faucet

_____

DTA-60 Prerinse Basket for Dishtables

_____

DTA-62 Prerinse Basket with Slide Bar for Deep Drawn Bowls (20"x20")

_____

DTA-63 Prerinse Slide Bar for Deep Drawn Bowls (20"x20")

_____

DTA-65 Prerinse Slide Bar for Deep Drawn Bowls (16"x20")

_____

DTA-67 Stainless Steel Rear Cross-Bracing (Factory Installed Only)

_____

DTA-69 Prerinse Basket with Slide Bar (16"x20")

_____

DTA-81 S/S Welded Leg Assemby with S/S Feet

Q-1a

200 Heartland Boulevard, Edgewood, NY 11717-8380

CO is constantly engaged in a program of

AB

ANCE T

V

AD
improving our products. Therefore, we reserve the right to
change specifications without prior notice.

VANCE TABCO, JANUARY 2005

© AD