Advance Tabco DT-6R-11 User Manual
DISHTABLE SHELVING
Item #: Qty #:
SORTING SHELVES
KD TUBULAR
TRADITIONAL DESIGN
FEATURES:
A solid die formed wall mounted rack shelf with
solid end brackets.
CONSTRUCTION:
TIG-welded with exposed areas blended to a satin finish.
MATERIAL:
Brackets are 16 gauge type 300 series
stainless steel.
Shelf is 16 gauge type 300 series stainless steel.
Model #:
Project #:
TRADITIONAL
MODEL #
DT-6R-11
DT-6R-12
DT-6R-13
DT-6R-14
# of
Racks
1
2
3
4
L
22”
42”
62”
82”
Wt
20 lbs.
30 lbs.
40 lbs.
50 lbs.
KD TUBULAR DESIGN
FEATURES:
A dual purpose open tubular design wall mounted
rack shelf with solid end brackets bolted in field.
Unit completely knock down.
CONSTRUCTION:
No welds. Unit is supplied with assembly hardware.
MATERIAL:
Brackets are 16 gauge type 300 series stainless steel.
Tubing is 1 5/8” diameter stainless steel 18 gauge tubing.
Stainless steel bolts (included).
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
www.advancetabco.com
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
MODEL #
DT-6R-21
DT-6R-22
DT-6R-23
DT-6R-24
# of
Racks
1
2
3
4
L
22”
42”
62”
82”
Wt
15 lbs.
23 lbs.
30 lbs.
38 lbs.
Q-3
DISHTABLE SHELVING
DOUBLE SIDED SLANT RACK SHELF
ecommended for D, G and U-Shaped Series
R
Dishtables Only.
TABLE MOUNTED TUBULAR RACK SHELF
DOUBLE SIDED DESIGN
Mounts to backsplash and end roll of dishtable
FEATURES:
A dual purpose double sided open tubular design
table mounted rack shelf with solid ends.
CONSTRUCTION:
Factory assembled for ease of Installation.
Mounts to dishtable with stainless steel bolts (included).
MATERIAL:
Side Plates are 14 gauge type 304 series stainless steel.
Tubing is 1 5/8” diameter 18 gauge type 300 stainless steel tubing.
9’ AND LONGER HAVE CENTER SUPPORT
Shelf shipped separated from table to reduce freight costs and chance of shipping damage.
DTA-79
Minimum Length 48”
MODEL #
DTA-79
Qty.
Stainless Steel Undershelves
FEATURES:
Stainless steel construction featuring the adjustable
die cast leg clamp.
CONSTRUCTION:
No welds. Shelf completely die formed.
MATERIAL:
Stainless steel.
UNDERSHELVES
MODEL #
DTA-SS-18
DTA-SS-24
DTA-SS-30
DTA-SS-42
DTA-SS-54
DTA-SS-66
DTA-SS-78
L
18”
24”
30”
42”
54”
66”
78”
Wt.
15 lbs.
18 lbs.
24 lbs.
33 lbs.
42 lbs.
50 lbs.
60 lbs.
Shelving is Reversible (Left or Right)
Size Undershelf to be at least
6” shorter than dishtable.
Q-3a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, MARCH 2010
Loading...