Advance Tabco DISLRCP-3 User Manual

SLIMLINE DROP-IN

REFRIGERATED COLD PAN UNITS

Drop-in Cold pan units can be placed in existing countertops and other work

areas to house items that need to be kept chilled. Perfect for

cold bar items such as bottle drinks or salad bar items.

Item #: Qty #:

DISLRCP-4 Shown

MATERIAL:

TOP: 18 gauge, #304 stainless steel, with extruded
black polyethylene thermal breaker marine edge
INSULATION: The pan is fully insulated and foamed in place

FEATURES:

High nominal cooling capacity. (1500 btu) for
guaranteed product temperature control

Aluminum encased copper tube evaporator panels
improve heat transfer by increasing contact area

This increases operating efficiency and reduces
power consumption

Expansion valve for efficient operation at various
temperature conditions

Refrigerant filter drier to insure cleanliness of sealed r
efrigeration circuit

Sight glass to insure a properly charged refrigeration system
Liquid receiver for improved refrigerant charge control

Liquid receiver for improved refrigerant charge control
Low running current suitable for any 115 volt circuit

Precision electronic thermostat for exact temperature control
Includes adapter bars for use with standard 12” x 20” pans

IMPORTANT NOTE:

The refrigeration compressor requires a free flowing supply of air for proper operation. For units installed in closed cabinets a minimum
unobstructed air intake of 200 sq in and a separate exhaust of 200 sq in must be supplied by the installer or cabinet maker. Failure to provide
adequate air intake and exhaust will void any warranty coverage on the unit.

with a 1-1/4” thickness on all sides and 2” thick on the bottom
and enclosed with a 22 gauge galvanized steel outer jacket. This
offers a lower heat gain into product
LINER: Constructed of 18 gauge, #304 stainless steel, with 3”
recessed top, one piece construction, all welded, ground and
polished to a uniform finish. All corners are coved with a 1/4”
radius. Liner is pitched towards a 1” I.P.S. drain
REFRIGERATION SYSTEM: The compressor is housed in a 16
gauge galvanized under structure, fabricated from formed angles
and bolted to the galvanized jacket. The fully self contained
condensing unit is provided with a hermetically sealed
compressor with a digital, programmable thermostat. The system
is fully charged with environmentally friendly R404-A refrigerant
ELECTRICAL: Unit will be wired for 15 amps, 120V,
single phase operation with an on/off thermostat switch.
2-3 Well Units: 115v, 8 Amps, 60 Hz, 1/4 HP
4 Well Unit: 115v, 8 Amps, 60 Hz, 1/3 HP

Unit to be hard wired in the field. See Below for optional
Cords. Please consult the factory for more information.

Model #:

Project #:

Model # Length

(L)

DISLRCP-2 47.5625” 31.785” 15-1/8” x 48-3/8” 2 R404-A 205 lbs. 25

DISLRCP-3 70.375” 45.29” 15-1/8” x 70” 3 R404-A 257 lbs. 31

DISLRCP-4 93.1875” 58.78” 15-1/8” x 91-5/8” 4 R404-A 325 lbs. 46

Inside Length

(B)

Cut-Out Size

(Unit)

# of

Wells

Refrigerant Weight

(lbs)

Cubic

Feet

NOTE: Units are not designed to cool foods originally warm. Food should already be chilled to maintain the proper temperatures

Optional Accessory:

Cord with NEMA Plug

www.advancetabco.com

www.advancetabco.com

SU-P-234 -

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

For Orders & Customer Service:

Email: [e-mail] or Fax: [phone]

Email: [e-mail] or Fax To: 631-242-6900

6’ with NEMA 5-15 plug

For Orders:

For Smart Fabrication™ Quotes:

For Smart Fabrication™ Quotes:

Email: [e-mail] or Fax: [phone]

Email: [e-mail] or Fax To: 631-586-2933

REF-V

DIMENSIONS and SPECIFICATIONS

TOL ± .125” ALL DIMENSIONS ARE TYPICAL

REF-V

200 Heartland Boulevard, Edgewood, NY 11717-8380

ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.

© ADVANCE TABCO, MARCH 2015