![](/html/ee/ee5c/ee5c44ad522d4603830603d40b160f36946088fdd6cde983a91ccb4299693476/bg1.png)
STANDARD DROP-IN
REFRIGERATED COLD PAN UNITS
Drop-in Cold pan units can be placed in existing countertops and other work
areas to house items that need to be kept chilled. Perfect for
cold bar items such as bottle drinks or salad bar items.
DIRCP-3 Shown
FEATURES:
High nominal cooling capacity. (1500 btu) for guaranteed
product temperature control
Aluminum encased copper tube evaporator panels
improve heat transfer by increasing contact area
This increases operating efficiency and reduces power
consumption
Expansion valve for efficient operation at various temperature
conditions
Refrigerant filter drier to insure cleanliness of sealed
refrigeration circuit
Sight glass to insure a properly charged refrigeration system
Liquid receiver for improved refrigerant charge control
Low running current suitable for any 115 volt circuit Precision
electronic thermostat for exact temperature control
Includes adapter bars for use with standard 12” x 20” pans
Item #: Qty #:
Model #:
Project #:
MATERIAL:
TOP: 18 gauge, #304 stainless steel, with extruded black polyethylene
thermal breaker marine edge
INSULATION: The pan is fully insulated and foamed in place with a 1-1/4”
thickness on all sides and 2” thick on the bottom and enclosed with a 22
gauge galvanized steel outer jacket. This offers a lower heat gain into
product
LINER: Constructed of 18 gauge, #304 stainless steel, with
3” recessed top, one piece construction, all welded, ground and
polished to a uniform finish. All corners are coved with a 1/4” radius. Liner
is pitched towards a 1” I.P.S. drain
REFRIGERATION SYSTEM: The compressor is housed in a 16 gauge
galvanized under structure,
fabricated from formed angles and bolted to the galvanized jacket. The
fully self contained condensing unit is provided with a hermetically sealed
compressor with a digital, programmable thermostat. The system is fully
charged with environmentally friendly R404-A refrigerant
ELECTRICAL: Unit will be wired for 15 amps, 120V, single phase
operation with an on/off thermostat switch.
1-3 Well Units: 115v, 8 Amps, 60 Hz, 1/4 HP
4-6 Well Units: 115v, 8 Amps, 60 Hz, 1/3 HP
Unit to be hard wired in the field. See Below for optional Cords.
Please consult the factory for more information.
IMPORTANT NOTE:
The refrigeration compressor requires a free flowing supply of air for proper operation. For units installed in closed cabinets a minimum
unobstructed air intake of 200 sq in and a separate exhaust of 200 sq in must be supplied by the installer or cabinet maker. Failure to provide
adequate air intake and exhaust will void any warranty coverage on the unit.
Model # Length
(L)
DIRCP-1 20.00” 18.32” 25-1/2” x 18-5/8” 1 R404-A 163 lbs.
DIRCP-2 33.50” 31.785” 25-1/2” x 32-1/8” 2 R404-A 205 lbs. 23
DIRCP-3 47.00” 45.29” 25-1/2” x 45-5/8” 3 R404-A 257 lbs. 31
DIRCP-4 60.50” 58.78” 25-1/2” x 59-1/8” 4 R404-A 325 lbs. 39
DIRCP-5 74.00” 72.28” 25-1/2” x 72-5/8” 5 R404-A 365 lbs. 47
DIRCP-6 87.50” 85.78” 25-1/2” x 86-1/8” 6 R404-A 398 lbs. 55
Inside Length
(B)
Cut-Out Size
(Unit)
# of
Wells
Refrigerant Weight
(lbs)
Cubic
Feet
15
NOTE: Units are not designed to cool foods originally warm. Food should already be chilled to maintain the proper temperatures
Optional Accessory:
Cord with NEMA Plug
www.advancetabco.com
www.advancetabco.com
SU-P-234 -
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: customer@advancetabco.com or Fax: 631-242-6900
Email: customer@advancetabco.com or Fax To: 631-242-6900
6’ with NEMA 5-15 plug
For Orders:
For Smart Fabrication™ Quotes:
For Smart Fabrication™ Quotes:
Email: smartfab@advancetabco.com or Fax: 631-586-2933
Email: smartfab@advancetabco.com or Fax To: 631-586-2933
REF-V
![](/html/ee/ee5c/ee5c44ad522d4603830603d40b160f36946088fdd6cde983a91ccb4299693476/bg2.png)
DIMENSIONS and SPECIFICATIONS
TOL ± .125” ALL DIMENSIONS ARE TYPICAL
REF-V
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, MARCH 2015