Advance Tabco DI-3-10 User Manual
STAINLESS STEEL
DROP-IN SINKS
Three Compartments - FOR GENERAL PURPOSE USE
Sinks Includes Faucet & Drain
FEATURES:
One piece seamless Deep Drawn sink bowl design.
All sink bowls have a large liberal radii with a minimum dimension of 2”
and are rectangular in design for increased capacity.
elf-Rim Design. Mounting hardware is provided. For counters over
S
7/8" and up to 1-1/2" thick, please order Thick-Counter Mounting Clips for
Drop-In Sinks, Model # K-28 Per Sink. (Quantity supplied varies based
on drop in sink ordered).
Includes 4" O.C. K-50 faucet & basket drain.
CONSTRUCTION:
Bowls fabricated from one sheet of stainless steel.
All bowls are Sound Deadened.
Units feature Advance Tabco’s Smart Finish™.
MECHANICAL:
Faucet supply is 1/2” IPS male thread.
Deck mounted faucets are furnished with aerator.
MATERIAL:
18 gauge type 304 series stainless steel (DI-3-10 is 20 gauge).
Faucets are brass-nickel plated.
Stainless Steel 1-1/2" IPS basket drain.
Item #: Qty #:
Model #:
Project #:
NOTE: Multi-Compartment Drop-In Sinks
N.S.F. Approved when used in Mobile
Food Carts and Kiosks only.
DI-3-10
Standard
Mounting Clips
For Countertops
7/8" Thick or Less
(Included)
Available Faucets & Accessories
Deck Mounted 8" Swing Spout. 4" O.C.
Deck Mounted 12" Swing Spout. 4" O.C.
Deck Mounted 8 1/2" Large Gooseneck. 4" O.C.
Deck Mounted Swing w/Spray. 8" O.C.*
Thick-Counter Mounting Clips for Countetops
over 7/8" and up to 2".
(Qty. supplied varies based on sink ordered)
*REQUIRES K-472 FAUCET HOLE REVISION
Standard Faucet conforms to NSF 61 Standard 9. An optional faucet
upgrade is required for compliance to AB 1953 Standards.
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
K-28 (Per Sink)
Mounting Clips
For Countertops
Over 7/8" Thick
(Maximum of 1 1/2")
Model # Qty
K-50
K-53
K-55
K-58
K-28
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
DI-3-1612
DI-3-1410
www.advancetabco.com
NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
A-4
DIMENSIONS and SPECIFICATIONS
OVERALL DIMENSION
(O.D)
CUTOUT DIMENSION
(O.D -3/4")
TOL ± .125” Supplied with Two K-50 Faucets & K-6 Basket Drain ALL DIMENSIONS ARE TYPICAL
DI-3-10
DI-3-1410
Cut-Out Size
37 1/4” x 18 1/4”
1 1/4” radius corners
Approx. Wt. 34 lbs.
Cut-Out Size
49 1/4” x 20 1/4”
1 1/4” radius corners
DI-3-1612
Approx. Wt. 50 lbs.
TYPICAL INSTALLATION
Cut-Out Size
55 1/4” x 24 1/4”
1 1/4” radius corners
Cut-Out Size = L to R x F to B
Approx. Wt. 60 lbs.
A-4a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JULY 2010
Loading...