Advance Tabco DI-2-208 Specifications

STAINLESS STEEL

DROP-IN SINKS

Two Compartments - FOR GENERAL PURPOSE USE

NOTE: Multi-Compartment Drop-In Sinks

.S.F. Approved when used in Mobile

N

Food Carts and Kiosks only.

FEATURES:

One piece seamless Deep Drawn sink bowl design.
All sink bowls have a large liberal radii with a minimum dimension of 2”

and are rectangular in design for increased capacity.
Self-Rim Design. Mounting hardware is provided. For counters over 7/8"

and up to 1-1/2" thick, please order Thick-Counter Mounting Clips for
Drop-In Sinks, Model # K-28 Per Sink. (Quantity supplied varies based
on drop in sink ordered).

Includes 4" O.C. K-50 faucet & basket drain.

CONSTRUCTION:

Bowls fabricated from one sheet of stainless steel.
All bowls are Sound Deadened.
Units feature Advance Tabco’s Smart Finish™.

MECHANICAL:

Faucet supply is 1/2” IPS male thread.
Deck mounted faucets are furnished with aerator.

MATERIAL:

18 gauge type 304 series stainless steel (DI-2-10 is 20 gauge).
Faucets are brass-nickel plated.
Stainless Steel 1-1/2" IPS basket drain.

Item #: Qty #:

Model #:

Project #:

DI-2-10

DI-2-2012

Standard

Mounting Clips

For Countertops

7/8" Thick or Less

(Included)

Available Faucets & Accessories

Deck Mounted 8" Swing Spout. 4" O.C.
Deck Mounted 12" Swing Spout. 4" O.C.
Deck Mounted 8 1/2" Gooseneck. 4" O.C.
Deck Mounted Swing w/Spray. 8" O.C.*
Thick-Counter Mounting Clips for Countetops

over 7/8" and up to 2".
(Qty. supplied varies based on sink ordered)

*REQUIRES K-472 FAUCET HOLE REVISION

Standard Faucet conforms to NSF 61 Standard 9. An optional faucet

upgrade is required for compliance to AB 1953 Standards.

For Replacement Faucets & Upgrades, Drains & Accessories

visit our website at www.advancetabco.com

K-28 (Per Sink)

Mounting Clips

For Countertops

Over 7/8" Thick

(Maximum of 1 1/2")

Model # Qty

K-50
K-53
K-55
K-58
K-28

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

Email Orders To: [e-mail]. For Smart Fabrication™ Quotes, Email To: [e-mail] or Fax To: 631-586-2933

DI-2-1410

DI-2-208

www.advancetabco.com

NEW YORK GEORGIA TEXAS NEVADA

Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]

A-3

DIMENSIONS and SPECIFICATIONS

OVERALL DIMENSION (O.D)

CUTOUT DIMENSION

(O.D -3/4")

TOL ± .125” Supplied with K-50 Faucet & K-6 Basket Drain ALL DIMENSIONS ARE TYPICAL

DI-2-10

Approx. Wt. 24 lbs.

I-2-1410

D

Cut-Out Size

24 3/4” X 18 1/4”

1 1/4” radius corners

Cut-Out Size

32 3/4” X 20 1/4”

1 1/4” radius corners

Approx. Wt. 30 lbs.

DI-2-208 & DI-2-2012

Cut-Out Size

44 3/4” X 20 1/4”

1 1/4” radius corners

TOP VIEW

TYPICAL INSTALLATION

Approx. Wt. 38 lbs.

Approx. Wt. 42 lbs.

A-3a

Cut-Out Size = L to R x F to B

200 Heartland Boulevard, Edgewood, NY 11717-8380

ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.

© ADVANCE TABCO, FEBRUARY 2010