Advance Tabco DI-1-168 User Manual
TAINLESS STEEL
S
DROP-IN SINKS
One Compartment - FOR GENERAL PURPOSE USE
Sinks Include Faucet & Drain
DI-1-168 DI-1-208
DI-1-2012
FEATURES:
One piece seamless Deep Drawn sink bowl design.
All sink bowls have a large liberal radii with a minimum
dimension of 2” and are rectangular in design for
increased capacity.
Self-Rim Design. Mounting hardware is provided. For counters
over 7/8" and up to 1-1/2" thick, please order Thick-Counter
Mounting Clips for Drop-In Sinks, Model # K-28 Per Sink.
(Quantity supplied varies based on drop in sink ordered).
DI-1-30 & DI-1-168: includes 4" O.C. K-52 faucet.
DI-1-208 & DI-1-2012: includes 4" O.C. K-50 faucet.
DI-1-2812: includes 4" O.C. K-53 faucet.
DI-1-9: includes single hole K-54 filler faucet.
DI-1-9 has Removable Electro-Polished stainless steel grill.
CONSTRUCTION:
Unit fabricated from one sheet of stainless steel.
All bowls are Sound Deadened.
Units feature Advance Tabco’s Smart Finish™.
MECHANICAL:
Faucet supply is 1/2” IPS male thread.
Deck mounted faucet is furnished with aerator.
DI-1-9 includes deck mounted faucet furnished with
“Push-Back” actuator.
MATERIAL:
18 gauge type 304 series stainless steel.
Faucets are brass-nickel plated.
Stainless Steel 1-1/2" IPS basket drain.
DI-1-30
Item #: Qty #:
Model #:
Project #:
DROP-IN
FILLER STATION
DI-1-9
LARGEST ONE
COMPARTMENT
DROP-IN SINK IN
THE INDUSTRY!
Supplied with
K-53 Faucet
DI-1-2812
Available Faucets & Accessories
Deck Mounted 8" Swing Spout. 4" O.C.
Deck Mounted Gooseneck. 4" O.C.
Deck Mounted. 12" Swing Spout. 4" O.C.
Water Filler Faucet (Single Hole)*
Standard
Mounting Clips
For Countertops
7/8" Thick or Less
(Included)
K-28 (Per Sink)
Mounting Clips
For Countertops
Over 7/8" Thick
(Maximum of 1 1/2")
Deck Mounted 8 1/2" Gooseneck. 4" O.C.
Deck Mounted Swing w/Spray. 8" O.C.*
Deck Mtd. X.H.D. 3 1/2" Gooseneck. 4" O.C.
Thick-Counter Mounting Clips for Countetops
over 7/8" and up to 2".
(Qty. supplied varies based on sink ordered)
*REQUIRES K-472 FAUCET HOLE REVISION
Standard Faucet conforms to NSF 61 Standard 9.
An optional faucet upgrade is required for
compliance to AB 1953 Standards.
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
Model # Qty
K-50
K-52
K-53
K-54
K-55
K-58
K-62
K-28
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
A-2
DIMENSIONS and SPECIFICATIONS
OVERALL DIMENSION (O.D)
CUTOUT DIMENSION
(O.D -3/4")
TOL ± .125” ALL DIMENSIONS ARE TYPICAL
DI-1-208 & DI-1-2012
DI-1-208
Approx. Wt. 18 lbs.
DI-1-2012
Cut-Out Size
22 1/4” x 20 1/4”
1 1/4” radius corners
DI-1-168
Cut-out Size
18 1/4” x 18 1/4”
1 1/4” radius corners
Approx. Wt. 15 lbs.
Supplied with K-52 Faucet
DI-1-30
Cut-Out Size
15” x 14 1/4”
1 1/4” radius corners
Approx. Wt. 20 lbs.
DI-1-2812
Approx. Wt. 42 lbs.
TYPICAL INSTALLATION
Supplied with K-50 Faucet
Cut-out Size
30 1/4” x 24 1/4”
1 1/4” radius corners
Supplied with K-53 Faucet
Approx. Wt. 11 lbs.
Supplied with K-52 Faucet
DI-1-9
Cut-Out Size
11 1/4” x 13 1/4”
1 1/4” radius corners
A-2a
Cut-Out Size = L to R x F to B
200 Heartland Boulevard, Edgewood, NY 11717-8380
Approx. Wt. 15 lbs.
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
Supplied with K-54 Faucet
© ADVANCE TABCO, JULY 2009
Loading...