Advance Tabco DI-1-10 User Manual
STAINLESS STEEL
DROP-IN SINKS
One Compartment - FOR HAND SINK USE
Sinks Includes Gooseneck Faucet & Drain
FEATURES:
One piece seamless Deep Drawn sink bowl design.
All sink bowls have a large liberal radii with a minimum dimension
of 2” and are rectangular in design for increased capacity.
Self-Rim Design. Mounting hardware is provided. For counters
over 7/8" and up to 1-1/2" thick, please order Thick-Counter
Mounting Clips for Drop-In Sinks, Model # K-28 Per Sink.
(Quantity supplied varies based on drop in sink ordered).
Includes 4" O.C. K-52 faucet & basket drain.
CONSTRUCTION:
Unit fabricated from one sheet of stainless steel.
All bowls are Sound Deadened.
Units feature Advance Tabco’s Smart Finish™.
MECHANICAL:
Faucet supply is 1/2” IPS male thread.
Deck mounted faucet is furnished with aerator and 4” O.C.
MATERIAL:
20 gauge type 304 series stainless steel.
Faucets are brass-nickel plated.
Stainless Steel 1-1/2" IPS basket drain.
Item #: Qty #:
Model #:
Project #:
DI-1-5
DI-1-5SP
DI-1-25
DI-1-10
Standard Mounting Clips
For Countertops 7/8" Thick
or Less (Included)
Available Faucets & Accessories
Deck Mounted 3 1/2" Gooseneck. 4" O.C.
Deck Mounted 8 1/2" Gooseneck. 4" O.C.
Deck Mounted Swing w/Spray. 8" O.C.*
Deck Mtd. X.H.D. 3 1/2" Gooseneck. 4" O.C.
Thick-Counter Mounting Clips for Countetops
over 7/8" and up to 2".
(Qty. supplied varies based on sink ordered)
*REQUIRES K-472 FAUCET HOLE REVISION
www.advancetabco.com
Mounting Clips For Countertops
Over 7/8" Thick (Maximum of 1 1/2")
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
K-28 (Per Sink)
Model # Qty
K-52
K-55
K-58
K-62
K-28
New 6”
Rear & Side
Splash
DI-1-10SP
Standard Faucet conforms to NSF 61 Standard 9. An optional faucet
upgrade is required for compliance to AB 1953 Standards.
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
DI-1-35
A-1
DIMENSIONS and SPECIFICATIONS
10"
6
"
5
"
6
"
10
1
2
"
C
L
10"
6"
10"
6"
10
1
2
"
C
L
13"
19"
14"
10"
OVERALL DIMENSION (O.D)
CUTOUT DIMENSION
(O.D -3/4")
TOL ± .125” Supplied with K-52 Faucet ALL DIMENSIONS ARE TYPICAL
I-1-5
D
Approx. Wt. 12 lbs.
DI-1-5SP
Approx. Wt. 16 lbs.
DI-1-10
DI-1-25
Cut-Out Size
11 1/4” x 13 1/4”
1 1/4” radius corners
Approx. Wt. 8 lbs.
DI-1-35
Cut-Out Size
16 1/4” x 14 1/4”
1 1/4” radius corners
Approx. Wt. 14 lbs.
DI-1-10SP
Approx. Wt. 10 lbs.
Approx. Wt. 18 lbs.
TOP VIEW FOR
DI-1-5 & DI-1-10
TOP VIEW FOR
DI-1-5SP & DI-1-10SP
TYPICAL INSTALLATION
Cut-Out Size
12 1/4” x 18 1/4”
1 1/4” radius corners
Cut-Out Size = L to R x F to B
A-1a
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JULY 2009
Loading...