Advance Tabco BMACP2-B-SB User Manual

MECHANICALLY ASSISTED COLD PAN

FEATURES:

High nominal cooling capacity. (1500 btuh) for guaranteed
product temperature control

Aluminum encased copper tube evaporator panels improve
heat transfer by increasing contact area. This increases
operating efficiency and reduces power consumption

Expansion valve for efficient operation at various temperature
conditions

Refrigerant filter drier to insure cleanliness of sealed
refrigeration circuit

Sight glass to insure a properly charged refrigeration system
Liquid receiver for improved refrigerant charge control
Low running current suitable for any 115 volt circuit
Precision electronic thermostat for exact temperature control

Switched 115 VAC receptacles to power condensing unit and
remote ventilation fan. (Optional)

Removable access door to compressor
4” Swivel Casters, with two brakes
Double sided sneeze guard & side panels
Adapter bars for 12” x 20” food pans, included

MATERIAL:

TOP: 18 gauge #304 stainless steel open frame
BODY: 20 gauge steel available in matte black vinyl clad

SNEEZE GUARD: 1/4” Thermoplastic Polymer

INSULATION: Fiberglass insulation

LINERS: 18 gauge, 304 stainless steel, one piece

construction, all welded, ground and polished to a
uniform finish

All corners are coved with a 1/4” radius

REFRIGERATION SYSTEM:

The compressor is housed in a 16 gauge galvanized under
structure, fabricated from formed angles and bolted to the
galvanized jacket. The fully self contained condensing unit is
provided with a hermetically sealed compressor with a digital,
programmable thermostat. The system is fully charged with
environmentally friendly R404-A refrigerant

ELECTRICAL:

Unit will be wired for 15 amps, 120V single phase
operation with an on/off thermostat switch

2-3 Well Units: 115 V, 8 AMPS, 60 Hz, 1/4 HP

4-5 Well Units: 115 V, 8 AMPS, 60 Hz, 1/3 HP

Includes 6 ft. long, 3 wire cord with a
NEMA 5-15P plug

PLUMBING:

1” I.P.S. drain

BMACP2-B-SB

BMACP3-B-SB

BMACP4-B-SB

BMACP5-B-SB

STAINLESS STEEL

EVERYDAY BUFFET

WITH ENCLOSED BASE

Item #: Qty #:

Model #:

Project #:

BMACP3-B-SB Shown

NOTE: Units are not designed to cool foods

originally warm. Food should already be

chilled to maintain the proper temperatures

Model Length Width Drain Distance

(A) x (B)

31.8125” 22.625” 26.8125” x 27.3125” 56.15” R404-A 250

47.125” 22.625” 41.6875” x 42.625” 56.15” R404-A 300 43

62.4375” 22.625” 57.00” x 58.00” 56.15” R404-A 345 55

77.75” 22.625” 72.3125” x 73.250” 56.15” R404-A 395 68

Height

Refrigerant

Wt

(lbs.)

Cu.

Ft.

30

www.advancetabco.com

NEMA PLUG 5-15P

Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.

For Orders & Customer Service:

Email: [e-mail] or Fax: [phone]

Email: [e-mail] or Fax: [phone]

For Smart Fabrication™ Quotes:

REF-X

DIMENSIONS and SPECIFICATIONS

TOL ± .125” ALL DIMENSIONS ARE TYPICAL

SIDE VIEW

REF-X

Stationary Shelf

Drop-Down Shelf

10” Wide Stainless Steel Tray Shelves

STATIONARY DROP-DOWN

Model Model Length

TTS-2 TTS-2D
TTS-3 TTS-3D
TTS-4 TTS-4D
TTS-5 TTS-5D

200 Heartland Boulevard, Edgewood, NY 11717-8380

31.8125” 14 lbs. 3

47.125” 16 lbs. 4

62.4375” 18lbs. 5

77.75” 21 lbs. 6

Approx

Wt.

Optional Accessories

Cu.

Visit our website

ft.

Everyday Buffet

Accessories!

for more

Stationary Shelf

Drop-Down Shelf

10” Wide Stainless Steel Tray Rails

STATIONARY DROP-DOWN

Model Model Length

TTR-2 TTR-2D
TTR-3 TTR-3D
TTR-4 TTR-4D
TTR-5 TTR-5D

ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.

© ADVANCE TABCO, JANUARY 2015

31.8125” 14 lbs. 3

47.125” 16 lbs. 4

62.4375” 18lbs. 5

77.75” 21 lbs. 6

Approx

Wt.

Cu.

ft.