Advance Tabco BFT2-B-SB User Manual
MECHANICALLY ASSISTED
EVERYDAY BUFFET FROST TOP
FEATURES:
High nominal cooling capacity. (1500 btuh) for guaranteed
product temperature control
Aluminum encased copper tube evaporator panels improve
heat transfer by increasing contact area
This increases operating efficiency and reduces power
consumption
Expansion valve for efficient operation at various temperature
conditions
Refrigerant filter drier to insure cleanliness of sealed
refrigeration circuit
Sight glass to insure a properly charged refrigeration system
Liquid receiver for improved refrigerant charge control.
Low running current suitable for any 115 volt circuit.
Precision electronic thermostat for exact temperature control.
Switched 115 VAC receptacles to power condensing unit and
remote ventilation fan. (optional)
Removable access door to compressor
4” Swivel Casters, with two brakes
Double sided sneeze guard & side panels
MATERIAL:
TOP: 16 gauge #304 stainless steel welded construction
BODY: 20 gauge steel available in matte black vinyl clad
SNEEZE GUARD: 1/4” Thermoplastic Polymer
INSULATION: Fiberglass insulation
LINERS: 18 gauge, 304 stainless steel, one piece
construction, all welded, ground and polished to a
uniform finish
All corners are coved with a 1/4” radius
REFRIGERATION SYSTEM:
The compressor is housed in a 16 gauge galvanized under
structure, fabricated from formed angles and bolted to the
galvanized jacket. The fully self contained condensing unit is
provided with a hermetically sealed compressor with a digital,
programmable thermostat. The system is fully charged with
environmentally friendly R404-A refrigerant
ELECTRICAL:
Unit will be wired for 15 amps, 120V single phase
operation with an on/off thermostat switch
115 V, 8 AMPS, 60 Hz, 1/4 HP
Includes 6 ft. long, 3 wire cord with a
NEMA 5-15P plug
STAINLESS STEEL
WITH ENCLOSED BASE
Item #: Qty #:
Model #:
Project #:
NOTE: Units are not designed to cool foods
originally warm. Food should already be
chilled to maintain the proper temperatures
Model Length Width Work Area
BFT2-B-SB
BFT3-B-SB
BFT4-B-SB
BFT5-B-SB
31.8125” 22.625” 26.8125” 56.15” R404-A 245
47.125” 22.625” 41.6875” 56.15” R404-A 320 62
62.4375” 22.625” 57.00” 56.15” R404-A 400 79
77.75” 22.625” 72.3125” 56.15” R404-A 485 97
Length (A)
BFT3-B-SB Shown
Height
Refrigerant
Wt
(lbs.)
Cu.
Ft.
43
www.advancetabco.com
NEMA PLUG 5-15P
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: customer@advancetabco.com or Fax: 631-242-6900
Email: smartfab@advancetabco.com or Fax: 631-586-2933
For Smart Fabrication™ Quotes:
REF-X
DIMENSIONS and SPECIFICATIONS
TOL ± .125” ALL DIMENSIONS ARE TYPICAL
SIDE VIEW
Stationary Shelf
10” Wide Stainless Steel Tray Shelves
STATIONARY DROP-DOWN
Model Model Length
TTS-2 TTS-2D
TTS-3 TTS-3D
TTS-4 TTS-4D
TTS-5 TTS-5D
REF-X
200 Heartland Boulevard, Edgewood, NY 11717-8380
Drop-Down Shelf
Approx
Wt.
31.8125” 14 lbs. 3
47.125” 16 lbs. 4
62.4375” 18lbs. 5
77.75” 21 lbs. 6
Optional Accessories
Cu.
Visit our website
ft.
Everyday Buffet
Accessories!
for more
Stationary Shelf
Drop-Down Shelf
10” Wide Stainless Steel Tray Rails
STATIONARY DROP-DOWN
Model Model Length
TTR-2 TTR-2D
TTR-3 TTR-3D
TTR-4 TTR-4D
TTR-5 TTR-5D
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JANUARY 2015
31.8125” 14 lbs. 3
47.125” 16 lbs. 4
62.4375” 18lbs. 5
77.75” 21 lbs. 6
Approx
Wt.
Cu.
ft.
Loading...