BBR-48 Shown
STAINLESS STEEL
BACK BAR REFRIGERATION
Item #: Qty #:
Model #:
Project #:
MATERIAL:
Cabinet constructed of wear resistant vinyl on steel in black finish
REFRIGERATION:
Refrigeration is fully accessible behind grille to right side of cabinet
Evaporator located above condensing unit permits full use of
interior spaces. Forced air is projected the length of cabinet across
the ceiling. Refrigeration system uses R134a refrigerant, which is
CFC and HCFC-free for compliance with environmental safety
concerns. Remote refrigeration models include expansion valve
installed. Condensate elimination is automatic and non-electric.
ELECTRICAL:
Plug Type: 8’ NEMA5-15P Electrical Cord Included
FEATURES:
Stainless Steel Top
Black Vinyl Coated On Steel
Self-Closing Hinged Doors. Magnetic Gaskets for positive seal
Door Lock(s) included
Adjustable Epoxy Shelves
Interior Lighting with On/Off switch
2 Year Parts/Labor 5 Year Compressor (Parts) Warranty
Adjustable Shelves
23-1/2”
WIDE
UNITS
28-3/16”
WIDE
UNITS
Model #
BBR-36
BBR-48
BBR-72
BBR-59
BBR-79
BBR-95
NEMA PLUG 5-15P
O.A. Size
L x W x H # of Kegs Shelves Doors Door Opening Amps/Volts Phase HP Refrigerant Wt. Cu.
36” x 23 1/2” x 36” 2 2 1 24” x 29 1/4” 5.0/115v 1 1/5 R134A 250 lbs. 18
48” x 23 1/2” x 36” 2 4 2 16 7/16” x 29 1/4” 5.0/115v 1 1/4 R134A 306 lbs. 26
72” x 23 1/2” x 36” 3 6 3 20 3/8” x 32” 5.0/115v 1 1/4 R134A 366 lbs. 36
59” x 28 3/16” x 37 1/4” 2 4 2 21” x 29 15/16” 7.2/115v 1 1/3 R134A 354 lbs. 37
79” x 28 3/16” x 37 1/4” 4 4 3 19 7/8” x 29 15/16” 7.2/115v 1 1/3 R134A 439 lbs. 50
95” x 28 3/16” x 37 1/4” 5 6 3 21” x 29 15/16” 7.2/115v 1 1/3 R134A 498 lbs. 60
PLEASE NOTE: Keg storage is maximized in lieu of shelf storage when required.
OPTIONAL:
Stainless Steel Exterior Upgrade
Model # BBR-1 Per Unit
Add Glass Doors
Model # SU-100 Per Unit
Add 3” Casters
Model # BBR-25-3 Per Unit
Add 6” Casters
Model # BBR-25-6 Per Unit
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: customer@advancetabco.com or Fax: 631-242-6900
Email: smartfab@advancetabco.com or Fax: 631-586-2933
For Smart Fabrication™ Quotes:
REF-FF
DIMENSIONS and SPECIFICATIONS
TOL Overall: ± .500” Interior: ± .250” ALL DIMENSIONS ARE TYPICAL
23-1/2” Wide Units
BBR-36 BBR-72BBR-48
28-3/16” Wide Units
REF-FF
BBR-59 BBR-95BBR-79
200 Heartland Boulevard, Edgewood, NY 11717-8380
ADVANCE TABCO is constantly engaged in a program of
improving our products. Therefore, we reserve the right to
change specifications without prior notice.
© ADVANCE TABCO, JANUARY 2015