Advance Tabco 441242X, 44722X, 44482X, 43542X, 43362X Installation Manual

Step 4:

Complete plumbing connection to drain and water supply.
Remove aerator to “flush” system then reconnect. Check
connection for leaks.

Installation Instructions for

BUDGET SINKS

200 Heartland Boulevard, Edgewood, NY 11717-8380

ABCO, JUNE 2005

ANCE T

© ADV

CHECK FOR CONCEALED DAMAGE

FILE CL

Sinks manufactured by ADVANCE TABCO®are designed and constructed for the use of
liquid containment. Suggested applications include Food Preparation, Manufacturing, Cooking,
Laboratory and Service and the like. ADVANCE TABCO®does not recommend product use for activities
employing harsh and active chemicals. Please consult factory regarding unusual applications.

AIM WITH DELIVERING FREIGHT CARRIER

CONTENTS INCLUDE:

• (1) Laundry/Utility Sink

Step 2:

Insert legs into Gusset (Illustration 2), and secure with
Set Screws

(Illustration 2a).

• (4) legs with Adjustable Feet

• (1) Drain Assembly

• (4) Set Screws

TOOLS REQUIRED:

• 5/32” Allen Wrench

• Pipe Wrench

• Adjustable Wrench

• Level

Step 1:

Remove legs and drain located in bottom carton. Turn Sink
upside down and remove the “Red Cap” where set screws can be
found (Illustration 1).

Illustration 2

Illustration 2a

“RED CAP”
Located in Leg Gusset

Illustration 1

Step 3:

Turn Sink to upright
position. Pre-Plumb
Drain and Faucet.
Position Sink at desired
location and level by
turning adjustable Bullet
Feet (Illustration 3).

Illustration 3

Continued >>