Advance Multimedia Internet Technology CDM531AM User Manual

User Manual

CDM531AM WiFi Mobile Router

IMPORTANT USAGE INSTRUCTION

For the convenience of use, this product accepts power from a desktop or a laptop computer. It’s mandatory to connect both of two USB connectors at one end of USB supplied power cable to computer at one time. Power supply is not sufficient for the device to operate normally if only one USB connector is inserted into the computer. In this scenario it might cause temporary malfunction on the computer.

The contents of this publication may not be reproduced in any part or as a whole, stored,

transcribed in an information retrieval system, translated into any language, or transmitted in any

form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or

otherwise, without the prior written permission.

Trademarks

All products, company, brand names are trademarks or registered trademarks of their respective

companies. They are used for identification purpose only. Specifications are subject to be changed

without prior notice.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against radio interference in a commercial environment. This equipment can generate, use and

radiate radio frequency energy and, if not installed and used in accordance with the instructions in

this manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause interference, in which case the user, at his own

expense, will be required to take whatever measures are necessary to correct the interference.

CE Declaration of Conformity

This equipment complies with the requirements relating to electromagnetic compatibility, EN

55022/A1 Class B.

Table of contents

IMPORTANT USAGE INSTRUCTION...................................................................................... 2

COPYRIGHT ............................................................................................................................. 3

FCC INTERFERENCE STATEMENT ....................................................................................... 3

CHAPTER 1 INTRODUCTION ............................................................................................. 5

1.1 PACKAGE LIST........................................................................................................... 5

1.2 HARDWARE INSTALLATION..................................................................................... 6

CHAPTER 2 GETTING START............................................................................................ 9

2.1 EASY SETUP UTILITY BY EASY SETUP .................................................................. 9

2.2 EASY SETUP BY CONFIGURING WEB PAGES..................................................... 14

CHAPTER 3 MAKING CONFIGURATION......................................................................... 18

3.1 ADVANCED ................................................................................................................ 18

3.1.1 BASIC SETTING.................................................................................................... 18

3.1.2 SECURITY SETTING............................................................................................. 28

3.1.3 ADVANCED SETTINGS ........................................................................................ 33

3.1.4 TOOL BOX .………………………………………………………………………..…….35

CHAPTER 4 TROUBLESHOOTING .................................................................................. 38

APPENDIX A SPEC SUMMARY TABLE ............................................................................... 42

APPENDIX B LICENSING INFORMATION ........................................................................... 43

Chapter 1 Introduction

Congratulations on your purchase of this outstanding Productʳ ˖CDM531 Wi-Fi Mobile Router. This product is specifically designed for mobile user who needs to have the internet access beyond his home and office. It provides a complete solution for Internet surfing and broadband sharing. Instructions for installing and configuring this product can be found in this manual. Before you install and use this product, please read this manual carefully for fully exploiting the functions of this product.

1.1 Package List

Items Description Contents Quantity

1 WiFi Mobile Router

2 USB Cable

(Only for Power use)

3 Power adapter

4 CD

1.2 Hardware Installation

Hardware configuration

USB

Wireless & USB LED

Hook

WPS Power Switch Power

Hook assembling or dissembling

“Click” sound

PUSH

LED indicators

LED color Description

USB LED

Blue 3G/3.5G is on

in flash Data access

Blue Blue WLAN is ON

Wi-Fi LED

Blue in flash Data access

Blue in fast flash Device is in WPS Mode

Installation Steps

DO NOT switch on WiFi Mobile Router before performing the installation steps below.

Step 1.

Turn off the power switch and then plug USB 3G Modem to the Router.

Note: The Wi-Fi Mobile Router is designed to work with either UMTS or EV-DO and even HSUPA 3G modem. Please refer to your service provider for detailed feature information.

Step 2.

Plug your USB modem which is with activated USB dongle.

Step 3.

You can choose either Power Adapter or USB Cable for power supply.

3.1. Use Power Adapter Connect with the power adapter to the receptor on the back panel of it.

3.2. Use USB cable Connect USB Cable to the same place of it.

Step 4.

4.1. Use Power Adapter Then plug the other end of the power adapter into a wall outlet.

4.2. Use USB Cable Then plug the other end of USB Cable to USB Port on your PC or NB.

Step 5.

Turn on the power switch.

The Wi-Fi and 3G LED will turn ON to indicate that the power has been applied.

Chapter 2 Getting start

2.1 Easy Setup Utility by Easy Setup

We provide Wizard and Easy Setup by Windows Utility to enable you to set up the WiFi Mobile Router quickly and easily.

Check the steps below before running the section.

(1) Press WPS button more than 6 seconds on the Router. The Router will reset to default. (2) Connect to the Router by Wi-Fi. The default SSID is the same as “Mac Address” (3) Insert CD to CDROM; Click the Easy Setup Utility from CD or Auto Run.

Easy Setup by Utility- Wizard

Step 1.

You can start to configure the device via the Easy Setup Utility

Step 2.

Select Language then click “Next” to continue.

Step 3.

1. Please select Wizard mode to run the setup step-by-step to diagnose the network settings of the Router.

2. Click the “Wizard” button and click “NEXT” to continue.

Step 4.

1. Make sure your USB 3G Modem is connected to the USB port of the Router.

2. Make sure the Router is powered on.

3. Make sure your computer has connected to the Router.

4. Make sure your computer has an IP address.

5. Click “Next” to continue.

Step 5.

1. Key in the SSID, Channel and Security options, for example: SSID: “Wi-Fi Mobile Router”, Security: WEP

Key: “1234567890”.

Default SSID is the same as “Mac Address”

* Channel 1- 11 for FCC, IC, NCC * Channel 1- 13 for CE

2. And then click “Next” to

continue.

Step 6-1.

Select “Auto-Detection”, and the Utility will try to detect and configure the required 3G service settings automatically. Click “Next” to continue.

ϡʳ Default PIN Code is empty, if you have PIN Code, you must enter it. For example “0000”. If no, just Click “Next” to continue.

Step 6-2.

Or you can select “Manual” and manually fill in the required 3G service settings provided by your ISP. Click “Next” to continue.

Step 7.

Check the settings, and then

click the “Next” if the settings are correct.

Step 8.

The Wi-Fi Mobile Router is rebooting to make your entire configuration activated.

Step 9.

Please reconnect to Router before click “Next”.

Step 10-1.

Click “Next” to test the Internet connection or you can skip test. And then click “Next” to continue.

Step 10-2.

Test the Internet connection

Step 11.

Congratulations! Setup is completed. Now you have already connected to Internet successfully.

2.2 Easy Setup by Configuring Web Pages

You can also browse web UI to configure the device.

Browse to Activate the Setup Wizard

Please type in the IP Address (http://192.168.123.254)

Please type “admin” in the Password and click ‘login’ button.

Select your language.

Select “Wizard” for basic settings with simple way.

Press “Next” to start the Setup Wizard.

Configure with the Setup Wizard

Step 1: Change System Password.

Set up your system password. (Default˖admin)

Step 2˖ Select Time Zone

+ 35 hidden pages

Advance Multimedia Internet Technology CDM531AM User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual