Advance Multimedia Internet Technology CDE560AM001 User Manual
User Manual
CDE560AM-001
WiFi Broadband Router
1
Copyright
The contents of this publication may not be reproduced in any part or as a whole, stored,
transcribed in an information retrieval system, translated into any language, or transmitted in
any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual,
or otherwise, without the prior written permission.
Trademarks
All products, company, brand names are trademarks or registered trademarks of their
respective companies. They are used for identification purpose only. Specifications are subject
to be changed without prior notice.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against radio interference in a commercial environment. This equipment can
generate, use and radiate radio frequency energy and, if not installed and used in accordance
with the instructions in this manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause interference, in which case
the user, at his own expense, will be required to take whatever measures are necessary to
correct the interference.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN
55022/A1 Class B.
The specification is subject to change without notice.
2
Table of Contents
Chapter 1 Introduction ........................................................................... 4
1.1 Packing List ................................................................................. 4
1.2 Spec Summary Table ................................................................. 5
1.3 Hardware Configuration............................................................. 7
1.4 LED indicators.............................................................................8
1.5 Button Definition .........................................................................9
1.6 Procedure for Hardware Installation........................................9
Chapter 2 Getting start ........................................................................ 11
Chapter 3 Making Configuration ........................................................ 17
3.1 Login to Configure from Wizard .............................................18
3.2 System Status ........................................................................... 22
3.3 Advanced ...................................................................................23
Appendix A FAQ and Troubleshooting ............................................. 71
What can I do when I have some trouble at the first time? ...... 71
How do I connect router by using wireless? ............................... 72
3
C
h
a
p
t
e
r
1
I
n
t
r
o
d
u
c
t
i
o
n
C
h
a
p
t
e
r
1
I
n
t
r
o
d
u
c
C
h
a
p
t
e
r
1
I
n
t
r
o
d
Congratulations on your purchase of this outstanding Wireless Broadband Router. This
product is specifically designed for Small Office and Home Office needs. It provides a
complete SOHO solution for Internet surfing, and is easy to configure and operate even for
non-technical users. Instructions for installing and configuring this product can be found in this
manual. Before you install and use this product, please read this manual carefully for fully
exploiting the functions of this product.
1.1 Packing List
items Description Contents Quantity
1 WiFi Broadband Router 1
u
c
t
t
i
o
n
i
o
n
2 Power adapter 5V 1A
3 CD
z Wireless broadband router unit
z Installation CD-ROM
z Power adapter
1
1
4
1.2 Spec Summary Table
Device Interface CDE560AM-001
Ethernet WAN
Ethernet LAN
Antenna fixed antenna 2
WPS
Button/Wireless
On
Reset Button Reset to Factory Default setting 1
LED Indication Status / WAN / LAN1 ~ LAN4/ WiFi ●
Power Jack
Wireless LAN (WiFi)
Standard IEEE 802.11b/g/n-lite compliance ●
SSID SSID broadcast or in stealth mode ●
Channel Auto-selection, manually ●
RJ-45 port, 10/100Mbps,
1
auto-MDI/MDIX
RJ-45 port, 10/100Mbps,
4
auto-MDI/MDIX
For WPS connection and Enable
1
“Wireless Function”
DC Power Jack, powered via external
1
DC 5V/1A switching power adapter
Security
WPS WPS (Wi-Fi Protected Setup) ●
WMM WMM (Wi-Fi Multimedia) ●
Functionality
Ethernet WAN PPPoE, DHCP client, Static IP ●
WAN Connection
One-to-Many NAT
NAT Session Support NAT session 10000
SPI Firewall IP/Service filter, URL blocking. ●
DoS Protection
WEP, WPA, WPA-PSK, WPA2,
●
WPA2-PSK
Auto-reconnect, dial-on-demand,
●
manually
Virtual server, special application,
●
DMZ, Super DMZ(IP pass-through)
DoS (Deny of Service) detection and
●
protection
5
Routing Protocol
●
v1/v2)
Management SNMP, UPnP IGD, syslog, DDNS ●
Static route, dynamic route (RIP
Administration
Web-based UI, remote login,
backup/restore setting
NAT up to 90Mbps and Wireless up
Performance
to70Mbps
Environment & Certification
Package
Information
CDE560AM-001, DC 5V/1A power
adapter, Quick Installation Guide
Device dimension (mm)
Package dimension
(246x210x62mm) SP/MP/ZP
Package
Package dimension
Information
(214x146x69mm) PP
Package dimension
(290x234x100mm) AP
Temp.: 0~40oC, Humidity 10%~90%
Operation Temp.
non-condensing
●
156x110x22
●
○
●
Storage Temp.
Temp.: -10~70oC, Humidity: 0~95%
non-condensing
EMI Certification CE/FCC compliance ●
RoHS RoHS compliance ●
*Specifications are subject to change without prior notice.
●
6
1.3 Hardware Configuration
Antenna
Antenna
Power Jack
Auto MDI/MDIX RJ-45 Ports
Automatically sense the types of WAN
and LAN when connecting to Ethernet
7
LAN1~LAN4
LEDs
3 in1 Button
1.WPS
2.Wireless
ON
3.Reset
Status
LED
WAN
LED
Wi-Fi
LED
1.4 LED indicators
LED status Description
Status Green in flash Device status is working.
Green RJ45 cable is plugged WAN LED
LAN LED
WiFi LED
Green in dark Wi-Fi Radio is disabled
Green in flash Data access
Green RJ45 cable is plugged
Green in flash Data access
Green WLAN is on
Green in flash Data access
Green in fast flash Device is in WPS PBC mode
8
1.5 Button Definition
Description
WPS
Wireless On
Reset
When Wireless is On, press this button (about 1 sec) to execute
WPS function.
When Wireless is off depend as Schedule Rule, Press this
button(about 1 sec) to enable "Wireless Radio".
1. Press this button then Power on the device
2. Press about 3~4 second, the device will reset to default then
Status LED flashes per sec in Normal status.
Notice: If Status LED flashes very fast, it means to press this button
too long and please try again.
1.6 Procedure for Hardware Installation
Step 1 Insert the Ethernet cable into LAN
Port:
Insert the Ethernet patch cable into LAN port
on the back panel of Router, and an available
Ethernet port on the network adapter in the
computer you will use to configure the unit.
9
Step 2 Insert the Ethernet patch cable into
Wired WAN port:
Insert the Ethernet patch cable form DSL
Modem into Wired WAN port on the back panel
of Router.
Step 3. Power on Router:
Connect the power adapter to the receptor on
the back panel of your Router.
Step 4. Complete the setup.
When complete, the Status LED will flash.
10
C
h
a
p
t
e
r
2
G
e
t
t
i
n
g
s
t
a
r
t
C
h
a
p
t
e
r
2
G
e
t
t
i
n
g
s
C
h
a
p
t
e
r
2
G
e
t
t
i
n
Insert the CD into CD reader on your PC. The program, AutoRun, will be executed automatically.
And then you can click the Easy setup Icon for this utility.
Configure the settings by the following steps.
2.1
.Select Language then click “Next” for
continues.
g
t
s
t
a
a
r
r
t
t
2.2 Setup mode
can select Wizard mode to run the
You
setup step-by-step or run advanced
mode to diagnose the network settings
of the router.
11
2.3 Advanced mode Setup.
Check the PC, Router or Internet icons
for the Status of PC, Router or Internet.
2.4 Quick Wizard Install mode Setup
1. Make sure the router is powered on.
2. Make sure your network adapter is
connected to the LAN port of the
router
3. Make sure your network adapter has
an IP address.
Click “Next” for continues
12
2.5. Wireless Setting.
Key in the SSID, Channel and Security
options, and then click “Next” for
continues.
2.6 Auto Detect WAN Service.
Click “Next” for continue.
Click the button, “Let me select WAN service
by myself”, to disable this function.
Note: The Item supports to detect the
Dynamic and PPPoE WAN Services only
13
Example, the Dynamic WAN type is
detected.
2.7. Manual select WAN Service
In the manual mode, Click the any icons for
continues.
2.8 Summary of the settings and Next
to “Reboot”
Click “Next” for continue.
14
2.9 Apply the Settings or Modify.
Click “Next” for continue.
2.10 Test the Internet connection.
Test WAN Networking service. Click “Next”
for continue.
You can ignore the by select the “Ignore
Test”.
15
2.11 Setup Completed.
The EzSetup is finish, you can open the
default web browser to configure advanced
settings of the Router.
Click “Finish” to complete the installation.
16
C
h
a
p
t
e
r
3
M
a
k
i
n
g
C
o
n
f
i
g
u
r
a
t
i
o
n
C
h
a
p
t
e
r
3
M
a
k
i
n
g
C
o
n
f
i
g
u
r
C
h
a
p
t
e
r
3
M
a
k
i
n
g
C
o
n
f
This product provides Web based configuration scheme, that is, configuring by your Web
browser, such as Mozilla Firefox or or Internet Explorer. This approach can be adopted in any
MS Windows, Macintosh or UNIX based platforms.
a
i
g
u
r
a
t
i
o
n
t
i
o
n
17
3.1 Login to Configure from Wizard
Type in the IP Address
(http://192.168.123.254
Type password, the default is
“admin” and click ‘login’ button.
)
Press “Wizard” for basic
settings with simple way.
Press “Next” to start wizard.
18
Step 1:
Set up your system password.
Step 2:
Select Wan Type.
Auto Detecting or
Setup Manually.
19
Step 3:
Setup the LAN IP and WAN
Type.
Step 4:
Please fill in PPPoE service
information which is provided by
your ISP.
Step 5:
Set up your Wireless.
Example:
20
Set up your Authentication and
Encryption.
Step 6:
Then click Apply Setting.
And then the device will reboot.
Step 7:
Click Finish to complete it.
21
3.2 System Status
This option provides the function for observing this product’s working status:
WAN Status.
If the WAN port is assigned a dynamic IP, there may appear a “Renew” or “Release” button on
the Sidenote column. You can click this button to renew or release IP manually.
Statistics of WAN: enables you to monitor inbound and outbound packets
22
3.3 Advanced
3.3.1 Basic Setting
Please Select “Advanced Setup” to Setup
23
Loading...