Advanced Mobile Payment AMP 9000 Quick Reference Guide
DQ-9000-1-EAMP 9 Series Countertop / Mobile Terminal Quick Reference Guide
AMP 9 Series Mobile Terminal
Quick Reference Guide
AMP 9000
2015 Advanced Mobile Payment Inc. (AMP) All rights reserved. AMP, the AMP logo, vTerminal
are either trademarks or registered trademarks of AMP in Canada and/or other countries. All other
trademarks or brand names are the properties of their respective holders. All features and
specifications are subject to change without notice. Product display image for representation
purposes only. Actual product display may vary. Reproduction or posting of this document without
prior AMP approval is prohibited.
DQ-9000-1-EAMP 9 Series Countertop / Mobile Terminal Quick Reference Guide
Pac kage co ntent s
AMP 9XXX-POS 1
USB charger power Supply 1
USB cable 1
Thermal paper roll 1
Stylus lanyard 1
Quick Reference Guide
Electrical Considerations
Use only approved power supply that is provided with this device, using other
power supply may cause damage to the device or risk of fire.
Avoid using this product during electrical storms.
Avoid locations near electrical appliances or other devices that cause excessive
voltage fluctuations or emit electrical noise (for example, air conditioners,
electric motors, neon signs, high-frequency or magnetic security devices, or
computer equipment).
Do not use the terminal near water or in moist conditions.
Unpacking the shipping carton
Open the shipping carton and inspect all its contents for possible tampering or damage.
The AMP 9 Series terminal is a secure device and any tampering may cause cease to
function properly.
To unpack the shipping carton
Remove and inspect the following items
Terminal
USB charger power supply
Remove plastic wrapping from the terminal
Remove plastic protective film from the LCD (if applicable)
Do not use a terminal that has been damaged or tampered. AMP 9 series terminal
comes equipped with tamper-evident labels. If a label or component appears
damaged, please notify the shipping company and your AMP representative or
service provider immediately.
Keep the shipping carton and packing materials for feature packing or moving
terminal.
1
Advanced Mobile Payment Inc.
Advanced Mobile Payment Inc.
DQ-9000-1-EAMP 9 Series Countertop / Mobile Terminal Quick Reference Guide
Exa minin g termi nal fea tures b efore s tarting the inst allat ion
Pap er hold er Lid
Han dle
Lan yard ho le
Sty lus pen
DQ-9000-1-EAMP 9 Series Countertop / Mobile Terminal Quick Reference Guide
Ant enna
ind uctiv e zone
LCD d ispla y
Key pad
Use r smart c ard slo t
Top vi ew
Mag netic s tripe c ard
Bac k view
Bac k cover
Tag lab el
Bar code La bel
Rub ber pad
Des cript ion
Paper holder lid: Thermal paper roll holder lid
Handle: Pull handle to open the paper holder lid
LCD display: 2.8 inch and 320*240 TFT LCD. Optional signature capture function.
Antenna inductive zone: The zone for tapping contactless card
Key pad: 10 alphanumeric keys, 8 functional keys, 1 power switch key.
User smart card slot: Supporting EMV card with contact surface facing up.
Magnetic Card Reader: ISO7812, 1/2 Tracks or 2/3 Tracks or 1/2/3 Tracks, bi-directional
swiping with the magnetic stripe facing LCD.
Rubber pad: Four pads, anti-vibration/non-slip.
Tag label: Showing model name, rated device parameter.
Barcode Label: Device extra information.
Back cover: Remove the cover to install battery or SIM/UIM/SAM card.
Lanyard hole: Slide lanyard through and make a loop on the outside.
Advanced Mobile Payment Inc.
USB P ort
LED I ndica tor
Int erfac e Figur e
LED indicator: Power status indicator of device
USB Port: USB communication / Battery charger interface.
SAM/SIM installation
Place the terminal face down and remove the battery cover.
If a SIM or SAM is required and is not already inserted, insert a SIM/SAM in
to the socket marked as SIM or SAM.
Ope n the bac k
cov er figu re
Ins tall
SIM /UIM
car d figur e
Advanced Mobile Payment Inc.
Loading...