Advanced Distributor Products HX User Manual
Nomenclature 2 Shipping Weights 6
Uncased "HX" Coil Dimensions 3 Pallet Quantities 7
Cased "HX" Coil Dimensions 4 Warranty 8
"HX" Coil Air Flow Data 5
General Specifications
Additional A Coil Features
: Produced in a ISO 9002 certified facility. : Optional painted cabinets.
: Ratings in conformity with ARI standard 210. :
: UL Listed.
:
For use with R-22 and R-410a refrigerants.
: External florators assembly for easy piston changes.
: Coils are individually tested at 450 PSI, then
:
Dual 3/4" FPT condensate drains on left and right.
pressurized and sealed. :
Heavy gauge embossed galvanized cabinets fully
: UV resistant drain pans are molded of high lined with 1/2" foil faced insulation (cased coils).
temperature (450O F) engineering polymer.
:
Refrigerant connections available on left or right.
: Rifled Copper Tubing.
:
Up or down airflow (standard coil), models with
: Patented lance fin design. face velocity above 350 are not recommended
: Refrigerant connections are 3/8" ODF liquid and 3/4" for downflow applications.
ODF (18-36 MBTUH) or 7/8" ODF (42-60 MBTUH) suction.
:
Up, down, left or right airflow (versaflow coil)
: Florators standard. :
HYDROTEC
TM
low water retention drain pan
:
All coils are foam packed with bar coding on label.
with anti microbial additive.
:
No hassle 5 year warranty.
SG-HXC-02-1206
December, 2006
All ADP coils carry the following approvals:
Product improvement is a continuous process at Advanced Distributor Products. Therefore, product specifications are subject to change
without notice and without obligation on our part. Please contact your ADP representative or distributor to verify detail
Interlocking door assemblies and snug line seal
grommets to minimize air leakage.
HX Coil
Engineering and
Specification Guide
Advanced Distributor Products
2175 West Park Place Blvd., Stone Mountain, GA 30087
Ph (770) 465-5560 Fax (770) 465-5599 www.adpnow.com
Nomenclature
A-Coil
H 5 J 2 4 C 1 4 5 0 5
Cabinet
H= Embossed
R,T,G,*P = Painted
Note: In this guide
H will be used for Product Code
reference purposes.
00 = Right Hand Uncased
01 = Right Hand Cased
04 = Left Hand Uncased
05 = Left Hand Cased
20 = Right Hand Cased Versaflow
METERING DEVICE 22 = Left Hand Cased Versaflow
Slab Number
Width
145 = 14.50"
Nominal MBTUH
210 = 21.00" etc.
Cabinet Depth
A = Uncased D = 21.00"
C = 20.50"
E = 21.50"
* P color included Carrier metering device and may not be applicable with other manufactures.
X
Page 2
Uncased Dimensions
Pan Coil
13" 14" 15.5" 17" 20" 20.5" 25.12"
Depth Height
HX5J18
X X X
HX5J24 X X X
HX6J18 X X X X
HX6J24 X X X X
HX6J30 X X X X
HX7J18 X X X X
HX7J24 X X X X
HX7J30 X X X X
HX7J36 X X X
HX8J24 X X X X X
HX8J30 X X X X X
HX8J36 X X X X
HX9J24 X X X X X
HX9J30 X X X X X
HX9J36 X X X X
HX9J42 X X X
HX1K30 X X X X X
HX1K36 X X X X
HX1K42 X X X
HX1K48 X X
HX2K36 X X X X
HX2K42 X X X
HX2K48 X X
HX2K60 X
HX3K36 X X X X
HX3K42 X X X
HX3K48 X X
HX3K60 X
HX4K36 X X X X
HX4K42 X X X
HX4K48 X X
HX4K60 X
HX5K42 X
HX5K48 X
HX5K60 X
HX6K42 X
HX6K48 X
HX6K60 X
HX7K42
X
HX7K48 X
HX7K60
X
19.5"
19.5"
19.5"
19.5"
15"
19.5"
21"
NEW
NEW
11"
13"
25"
29"
27"
Available Drain Pan Width (uncased coil width)
19.5"
19.5"
25"
19.5"
19.5"
19.5"
17"
19"
27"
23"
19.5"
19.5"
Page 3
Loading...