How it Works
Advanced Distributor Products
Loading...
B
F
H
L
S
Loading...
Loading...
HH
User Manual
20 pgs1.32 Mb0

Advanced Distributor Products HE, HH, LA, LH User Manual

HE, HH, LA/LH Series
Evaporator Coils
SG-HAC-30
2175 West Park Place Blvd., Stone Mountain, GA 30087
Specification Guide
Product improvement is a continuous process at Advanced Distributor Products. Therefore, product specifications are subject to
change without notice and without obligation on our part. Please contact your ADP representative or distributor to verify details.
© by Advanced Distributor Products. All rights reserved.
Contents ............................................. Pa Page
HE Series A-Coil
Features ................................................... 2
Nomenclature ........................................... 3
Uncased Dimensions ................................ 4
February 2012
Cased Dimensions .................................... 7
Airflow Data ............................................ 11
Coil Weights ........................................... 14
Pallet Quantities ...................................... 15
HH Series Horizontal Slab Coil
Features & Nomenclature ....................... 16
Specifications.......................................... 17
LA/LH Series Large Tonnage “A” and “H” Coils
Features & Nomenclature ....................... 18
Specifications.......................................... 19
HE Series – Product Features
• High efficiency lanced fin design.
Face velocity above 350 ft/min. is not recommended for downflow or counterflow applications due to potential water
2
• “No-hassle” 5 year warranty.
• R-22, R-410A, AC & Heat Pump compatible.
• All coils have durable packaging with bar coded labels on the box.
• Threaded expansion valves available factory installed or as a field installed kit.
• Coils are air pressure tested at 500 PSI, leak tested with Helium, sealed with rubber plugs, then charged with dry air.
• Piston options include externally accessible body for easy piston change out and/or TXV installation.
• Liquid line refrigerant connections are 3/8" ODF.
• Suction line refrigerant connections are 3/4" ODF (A-Coil 18-36 size models) or 7/8" ODF (A-Coil 42-60 size models & all
Horizontal Slab-Coils).
• Suction line refrigerant connections are 1.125" on slab number E43 for size 42 models and higher.
• Copper refrigerant connections for easy brazing on both copper and aluminum slab models.
• Cased coils have heavy gauge embossed galvanized cabinets fully lined with 5/8" foil faced insulation.
• Optional painted cabinets.
• Corrosion resistant coil header plates.
• All A-Coils are upflow or downflow capable.
• All multi-position coils are upflow, downflow, and left or right airflow capable.
• Cabinet insulation hold down tabs for easy drain pan removal.
• Interlocking doors reduce air leakage and allow for easy access.
• Enhanced refrigerant pipe grommets: secure, tight, and easy to install.
• Non-captive refrigerant lines with long stubs make for easy installation.
• All multi-position coils are field convertible from horizontal right-to-left airflow and horizontal left-to-right airflow (except E41,
E43, and A91 slabs).
• Dual 3/4" FPT condensate drains on front-left and front-right side of drain pans.
• UV resistant drain pans are molded of high temperature (450 deg. F) engineered polymer.
• Microban® antimicrobial additive to inhibit the growth of mold and mildew in the drain pan.
• HydroTEC™ low water retention drain pan.
• Expansion valve with improved temperature sensing:
1. Mounted inside cabinet to prevent external sweating
2. Bulb clamped standard factory installed
3. Wrapped bulb optional factory installed
WARNING— blow-off.
HE Series – Nomenclatu re
Cabinet Color Piston Size
H = Embossed
*AP = TXV access port
MBTUH R-22 R-410A
G = ICP
Slab Number
Note: Piston will alw ays be
Metering Device Product Code
5 = Non-bleed HP-A/C TXV (R-22)
Cabinet Height
Nominal MBTUH 00 = Uncased
Note: Cabinet heights not a selectable
Cabinet Depth
16 = 16.50" option, see specifications
Width 25 = 25.50"
Cabinet Upper Notch Distance between top flange and
front of cabinet.
* TXV access port standard on factory installed TXVs;
Note: If cabinet upper notch is anything
E = 2.25" etc
must be increased to next offered size.
42 =8073
48 =8476
30 =6759
36 =73674118 =5349
24 =5953
41
B1205
AP
12 =
145HG30224
C
3
A = Armstrong AW = TXV access port w/bulb wrap D = Ducane
J = Goodman/Amana N = Nordyne P = Carrier/Bryant/Payne R = Rheem/Ruud T = Trane/American Std. Y = York/Luxaire/Coleman
60 = 93 93
E & A = Copper slab sized to match the nominal G & B = Aluminum slab BTU rating of the coil.
1 = Piston (R-410A) 00 = Right-hand uncased 2 = Piston (R-22) 01 = Right-hand cased 3 = Bleed A/C TXV (R-22) 04 = Left-hand uncased 4 = Non-bleed A/C TXV (R-22) 05 = Left-hand cased
20 = Right-hand cased multi-position 6 = Non-bleed A/C TXV (R-410A) 22 = Left-hand cased multi-position 9 = Non-bleed HP-A/C TXV (R-410A)
12 = 12.50"
A = Uncased D = 21.00" 18 = 18.50" C = 20.50" E = 21.50" 20 = 20.50"
22 = 22.50" Only available with H, R,& T models
130 = 13.00" 27 = 27.50" 132 = 13.25" 29 = 29.50" 135 = 13.50" 31 = 31.50" 137 = 13.75" 140 = 14.00" Up to 26.75", depending on size.
A = Uncased B = .75" (standard) C = 1.25" (counterflow)
Optional for piston models.
D = 1.75" other than standard (B), cabinet hei ght
A = Width
HE Series – Uncased Dimensions
* E & A = Copper slab; G & B = Aluminum slab.
18 X X X X
24 X X X X
18 X X X X
24 X X X X
30 X X X X
24 X X X X
30 X X X X
36 X X X
30
X X X X X
36
X X X X
42 X X X
30 X X X X X
36 X X X X
42 X X X
48 X X
36 X X X X
42 X X X
48
X X
36
X X X X
42 X X X
48 X X
60 X
18 X X X
24 X X X
18 X X X X
24 X X X X
30
X X X X
24 X X X X
30 X X X X
36 X X X
36 X X X X
42 X X X
36 X X X X
42 X X X
48 X X
36 X X X X
42 X X X
48 X X
36 X X X X
42 X X X
48 X X
60 X
36 X X X X
42 X X X
48 X X
60 X
4
B = Depth C = Height
C
B
A
Slab *
Number
(A,B) 01
(A,B) 02
(A,B) 03
(A,B) 04
(A,B) 05
(A,B) 06
(A,B) 07
(A,B) 08
(A,B) 09
Nominal
Tonnage
Drain Pan Width [A]
13" 14" 15.5" 17" 20" 20.5" 23.5" 25.12"
Pan
Depth [B]
19.5" 11"
19.5" 13"
19.5" 15"
19.5" 17"
19.5" 19"
19.5"
19.5" 25"
19.5" 11"
19.5"
Coil
Height [C]
21"
13"
(A,B) 10
(A,B) 11
(A,B) 12
(A,B) 13
(A,B) 14
(A,B) 15
19.5"
19.5" 17"
19.5" 19"
19.5" 21"
19.5" 23"
19.5" 25"
15"
HE Series – Uncased Dimensions
* E & A = Copper slab; G & B = Aluminum slab.
Drain Pan Width [A]
Slab *
42 X
48X60 X
18 X X X
24 X X X
18 X X X X
24 X X X X
30 X X X X
18 X X X X
24 X X X X
30 X X X X
36 X X X
24 X X X X X
30 X X X X X
36 X X X X
42 X X X
36 X X X X
42 X X X
48 X X
36 X X X X
42 X X X
48 X X
42 X X X
48
X X
60 X
42 X X X
48 X X
60 X
18 X X X
24 X X X
18 X X X X
24
X X X X
30
X X X X
24 X X X X
30 X X X X
36 X X X
24 X X X X X
30 X X X X X
36 X X X X
30 X X X X X
36
X X X X
42
X X X
36 X X X X
42 X X X
48 X X
36 X X X X
42 X X X
48 X X
60 X
36 X X X X
42 X X X
48 X X
60 X
42 X
48 X
60 X
36 X
42 X
48 X
60 X
5
Number
Nominal
Tonnage
13" 14" 15.5" 17" 20" 20.5" 23.5" 25.12"
Pan
Depth [B]
Coil
Height [C]
(A,B) 91
(E,G) 20
(E,G) 21
(E,G) 22
(E,G) 23
(E,G) 24
(E,G) 25
(E,G) 26
(E,G) 27
(E,G) 30
20" 25"
19.5" 11"
19.5" 13"
19.5" 15"
19.5" 17"
19.5" 19"
19.5"
19.5" 23"
19.5" 25"
19.5" 11"
21"
(E,G) 31
(E,G) 32
(E,G) 33
(E,G) 34
(E,G) 35
(E,G) 36
(E,G) 37
(E,G) 41
(E,G) 43
19.5" 13"
19.5" 15"
19.5" 17"
19.5" 19"
19.5" 21"
19.5" 23"
19.5" 25"
20" 25"
20" 27"
HE Series – Uncased Dimensions
* E & A = Copper slab; G & B = Aluminum slab.
Drain Pan Width [A]
Slab *
42 X
48X60 X
24 X
30 X
36 X
36 X X X X
42 X X X
48 X X
60 X
42 X
48 X
60 X
42 X
48 X
60 X
42 X
48 X
60 X
42 X
48 X
60 X
42 X
48
X
60 X
42 X
48 X
60 X
24 X
30 X
36 X
42X48
X
60 X
18 X X
24 X X
30 X X
36 X X
24 X X
30 X X
36
X X
24
X X
30 X X
36 X X
24 X X
30 X X
36 X X
42 X X
48 X X
60 X
24 X X X
30 X X X
36 X X X
42 X X
48 X X
60 X
24 X X X
30 X X X
36 X X X
42 X X
48 X X
60 X
6
Number
Nominal
Tonnage
13" 14" 15.5" 17" 20" 20.5" 23.5" 25.12"
Pan
Depth [B]
Coil
Height [C]
(E,G) 46
(E,G) 47
(E,G) 48
(E,G) 49
(E,G) 50
(E,G) 51
(E,G) 54
(E,G) 55
(E,G) 56
(E,G) 57
19.5" 29"
19.5" 27"
19.5" 27"
19.5" 25"
19.5" 27"
19.5" 29"
19.5" 29"
19.5" 31"
19.5" 27"
19.5" 27"
(E,G) 65
(E,G) 80
(E,G) 81
(E,G) 82
(E,G) 83
(E,G) 84
(E,G) 85
(E,G) 86
(E,G) 87
(E,G) 88
19.5" 31"
19.5" 17"
19.5" 19"
19.5" 21"
19.5" 23"
19.5" 23"
19.5" 25"
19.5" 25"
19.5" 27"
19.5" 27"
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use