Advance Adapters 716870 User Manual

ADVANCE ADAPTERS INC. P/N: 716870

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 1 OF 2
Telephone: [phone] Fax: [phone] Page Rev. Date: 10-29-96

SPRING UP FOLDING STEPS

KIT CONSISTS OF:
No. Qty Part No. Description

1. 2 716864 STEEL STRIP

2. 1 716870L-BLK DRIVER'S SIDE STEP ASSEMBLY

3. 1 716870R-BLK PASSENGER SIDE STEP ASSEMBLY

BOLT LIST:

1. 10 722514 1/4"-20 NYLON LOCK NUT

2. 10 722518 1/4"-20 x 7/8" PAN HEAD MACH. SCREW

3. 20 722523 1/4" FLAT WASHERS

4. 6 723144 1" LG SHEET METAL SCREWS

*THESE PARTS ARE USED IN STEP ASSEMBLY

FRONT OF VEHICLE

DRILL 9/32" DIA. HOLES
2" APART

ROCKER DOUBLE SEAM

RIDER'S SIDE

(DRIVER'S SIDE TO BE OPPOSITE OF SHOWN)

(4) 1/4"-10 X 1"
SLOT HD. MACH SCR.

APPROX. 11"

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.

ADVANCE ADAPTERS INC. P/N: 716870

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 2 OF 2
Telephone: [phone] Fax: [phone] Page Rev . Date: 06-15-93

SPRING UP FOLDING STEPS

FLOOR BOARD

ALTERNATE INSTALLATION

SHEET METAL SCREW

1/4"-20 X 1"

1/4"-20 X 1" H.H.C.S.

1/4"-20 X 1" SLOT HEAD MACH. SCREW

4 PLACES

BODY SEAM

IF THE STEP DOES NOT FIT FLUSH ON BODY UNDER PANEL,

THEN A REAR SUPPORT BRACKET MUST BE MADE AND

INSTALLED. (MATERIAL SUPPLIED)

STANDARD INSTALLATION

SHEET METAL 3 PLACES

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.