Advance Adapters 716287 User Manual

ADVANCE ADAPTERS INC. P/N: 716287

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 1 OF 1
Telephone: [phone] Fax: [phone] Page Rev. Date: 01-15-07

CLUTCH SLAVE CYLINDER BRACKET FOR

TOYOTA LAND CRUISER CONVERSIONS

KIT CONSISTS OF:
No. Qty Part No. Description

1. 1 716039 SPACER

2. 1 716287-BLK BRACKET ASSEMBLY

3. 2 723704 LOCK WASHER 3/8" PLATED

4. 2 723724 H.H.C.S. 3/8"-16 x 1-3/4" PLT G2

5. 1 723735 WASHER

INSTALLATION INSTRUCTIONS:

This bracket is designed for use on a Toyota Land Cruiser V8, Chevy
engine conversions in vehicles that were originally equipped with a
hydraulic clutch, and early Jeeps switching to a hydraulic linkage.
This bracket utilizes a stock Toyota slave cylinder (Toyota Part No.
31470-60022), and Toyota hose (Part No. 96920-34305 - AA Part

No. 716119). The slave cylinder and hose for Jeep vehicles are P/N
716116 & 716130, used with the 716118 master cylinder). When

using these slave cylinders, the push rod may have to be shortened to
accommodate different styles of throw out arms. There may be some
variations in the style of the Chevrolet bellhousing, and because of this
we have included a spacer and washer for the lower hole on the
bracket.

Land Cruiser Slave Cylinder (AA P/N 716119)

P/N 716116 Installed

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.