Advance Adapters 716127 User Manual

ADVANCE ADAPTERS INC. P/N: 716127

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 1 OF 1
Telephone: [phone] Fax: [phone] Page Rev. Date: 02-24-99

JEEP CJ5 WINDSHIELD HOLD DOWN

BRACKET ASSEMBLY (ROUND FENDER)

KIT CONSISTS OF:
No. Qty Part No. Description

1. 2 716195 KNOBS

2. 2 716245 BRACKET

3. 2 716246 DASH BRACKETS

4. 6 722509 1/4"-20 x 1-1/4" H.H.C.S.

5. 4 722512 1/4"-20 x 1" F.H.C.S.

INSTALLATION INSTRUCTIONS:

1. With the old brackets removed, bolt the new dash brackets to the
dash with the two flat head screws provided.

2. Bolt the windshield brackets to windshield as illustrate.

3. Install knob into opening and thread into dash bracket.

STOCK DASH

DASH BRACKET
PART NO. 716246

PART NO. 716245

PART NO. 722509

KNOB

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.