Advance Adapters 716117 User Manual

ADVANCE ADAPTERS INC. P/N: 716117

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 1 OF 2
Telephone: [phone] Fax: [phone] Page Rev . Date: 06-28-01

DUAL SWINGING PEDAL ASSEMBLY

USING DUAL MASTER CYLINDER

KIT CONSISTS OF:
No. Qty Part No. Description

1. 2 715651 CLIPS

2. 1 716187 BRACKET

3. 1 716190 RIGHT PEDAL

4. 1 716191 LEFT PEDAL

5. 1 716192 SHAFT

6. 2 716194 3/8"-24 x 6" ALL THREAD (MODIFIED)

7. 2 716196 BUTTON

8. 2 716196-W 5/16" FLAT WASHER

9. 2 716197 SPECIAL HEX NUT

10. 2 716198 NYLINER

11. 2 716651 PEDAL PADS

12. 2 720005 COTTER PINS

13. 7 723701 3/8"-16 NUT

14. 7 723704 3/8" LOCK WASHER

15. 2 723705 3/8"-24 NUT

16. 4 723722 3/8"-16 x 1.25 H.H.C.S.

17. 3 723723 3/8"-16 x 1.5 H.H.C.S.

18. 14 723735 3/8" FLAT WASHER

Optional Items:

P/N 716118 - Dual Master Cylinder
P/N 716116 - Slave Cylinder Kit
P/N 716287 - Slave Cylinder Bracket

(GM block only)

INSTALLATION INSTRUCTIONS:

The dual swinging pedals have been designed for use in Jeep vehicles. They can be easily used on several other types
of conversions. The pedals have been designed so as to allow for the steering column to pass between the two pedals.
To install the pedals, you must first decide on the exact location to be used. Once the position is decided upon, you can
then mark the position for bolting. Drill your marked holes, and be sure to allow clearance holes for the master cylinder.
Bolt the master cylinder to the dual pedals with the firewall sandwiched between the two. After you've obtained the proper
adjustments, be sure to tighten the special hex nuts (P/N 716197) up against the two buttons (P/N 716196) with the two
3/8"-24 nuts (P/N 723705), locking the all thread rods into place. The dual pedal kit must be used with P/N 716118 dual
master cylinder. This is a Chevrolet item that has had the clutch and brake valves interchanged. You will notice that the
markings on the master cylinder will read just the opposite of their actual usage. The slave cylinder for the clutch can be
of many different styles or makes and will probably need some special type of mounting bracket made.

NOTE: This kit will not work with disc brake applications.

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.

ADVANCE ADAPTERS INC. P/N: 716117

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 2 OF 2
Telephone: [phone] Fax: [phone] Page Rev . Date: 05-02-00

DUAL SWINGING PEDAL ASSEMBLY

USING DUAL MASTER CYLINDER

CAUTION:

ADVANCE ADAPTERS CHANGES THE INNER VALVES
FROM THE STOCK ASSEMBLY SO THAT THE CORRECT
VALVES WILL BE ON THE APPROPRIATE SIDE.

Ref: E15-#E34404 - Rebuild Kit Numbers
Mfg. Raybestos: #MK253 Brake, #MK254 Clutch

PART# 716118

PART# 716192

PART# 720005

PART# 716196-W

PART# 715651

PART# 716198
(INSIDE)

PART# 716194

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.

PART# 716197

PART# 716196

PART# 723705