Advance Adapters 716055 User Manual

ADVANCE ADAPTERS INC. P/N: 716055

P.O. Box 247, 4320 Aerotech Center Way New Kit: (10/03)
Paso Robles, CA 93447 PAGE 1 OF 1
Telephone: [phone] Fax: [phone] Page Rev . Date: 08-09-10

CROSSMEMBER KIT

KIT CONSISTS OF:

No. Qty Part No. Description

1. 1 716055A ADAPTER MOUNT

2. 1 716055B CROSSMEMBER MOUNT

3. 2 716055C URETHANE BUSHING

4. 1 716055D BOLT BUSHING

5. 1 725022 1/2"-13 x 7.5" H.H.C.S.

6. 1 725005 1/2"-13 NYLON LOCKNUT

7. 2 724307 7/16"-14 x 1" H.H.C.S.

8. 2 724302 7/16" FLAT WASHER

This crossmember is designed to originally to fit our Powerglide adapter, P/N 50-9200. We now use it on several of our
adapter kits. Some stock transfer case linkages may interfere with one set of mounting holes on this support, if this is
true on your application you may be required to cut a section on the mount off like shown below.

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly
recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We
recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally
available at automotive dealerships and parts stores.