Advance Adapters 716048 User Manual

ADVANCE ADAPTERS INC. P/N: 716048

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 1 OF 1
Telephone: [phone] Fax: [phone] Page Rev. Date: 10-29-01

DANA 300 CROSSMEMBER SPACER

KIT CONSISTS OF:
No. Qty Part No. Description

1. 1 716048-BLK DANA 300 CROSSMEMBER SPACER

2. 2 724301 NYLON LOCK NUT

3. 4 724302 FLAT WASHER 7/16" SAE PLT.

4. 2 724307 H.H.C.S. 7/16"-14 X 1"

INSTALLATION PROCEDURES:

This spacer works with the 716021 crossmember mount by bolting the 716048-BLK to the adapter housing. This will
step the mounting area down so the 716021 is far enough down to reach the skid pan of the Jeep.

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.