Advance Adapters 715523 User Manual

ADVANCE ADAPTERS INC. P/N: 715523

P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 1 OF 1
Telephone: [phone] Fax: [phone] Page Rev. Date: 12-14-07

JEEP WRANGLER NP231 TRANSFER CASE

SHIFTER CONTROL BRACKET

KIT CONSISTS OF:
No. Qty. Part No. Description

1. 1 715523-BLK WELDED BRACKET ASSEMBLY

2. 1 715523-SP CASTING SPACER FOR 51-6800 CASTING

3. 2 723701 NUT 3/8"-16

4. 2 723704 3/8" LOCKWASHERS

5. 2 723722 H.H.C.S. 3/8"-16 x 1-1/4"

6. 4 723735 FLAT WASHER 3/8"

NOTE:

There are three different types of transfer case shifter control linkages. Depending on what transmission was originally used
in your vehicle will determine what modifications may be necessary to use the appropriate bracket. The most popular
conversion is for the ones replacing the Peugeot and AX15 5 speed. The 4 cylinder applications using the AISAN Warner gear
boxes have a slightly different mounting requirement and vehicles replacing the Torqueflite automatic have the third variation.
The bracket that we have included with this kit can be made to fit with all the various applications and some minor modifications
may be necessary for the automatics and 4 cylinder applications.

We have included some photos to show how the bracket will mount to the new adapter assembly. This adapter is compatible
with both the thin style and wide style automatic transmission conversions for Wrangler vehicles. This bracket is not
compatible with Cherokee transmission conversions.

Jeep# 53004278 - This bracket is normally found
on Jeep Peugeot transmissions. This bracket
mounts to the top of the new linkage bracket.

Jeep# 53005371 - This bracket is normally used
with AX15 transmissions. This bracket mounts
below the new linkage bracket.

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will void
any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend that
you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that a service
manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at automotive dealerships
and parts stores.