Advance Adapters 50-1114 User Manual
ADVANCE ADAPTERS INC. P/N: 50-11 14
A
P.O. Box 247, 4320 Aerotech Center Way New Item:
Paso Robles, CA 93447 PAGE 1 OF 2
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev . Date: 04-27-06
NISSAN TITAN TO ATLAS T/C
ADAPTER PLATE
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 51-1114 ADAPTER PLATE
2. 1 1 720037 10mm-1.5 x 35mm H.H.S.C.
3. 3 720088 10mm-1.25 x 40mm STUDS
4. 6 723704 3/8" LOCK WASHERS (ATLAS TO ADAPTER PLATE)
5. 6 723722 3/8"-16 x 1.25" H.H.C.S. (ATLAS TO ADAPTER PLATE)
St uds in t ai lhsg. Nut s on atlas side
Dowel
ll others-
Bolt thru t ai lhsg. Thread into plate.
Dowel
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components will
void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we strongly recommend
that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter components. We recommend that
a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment. These manuals are normally available at
automotive dealerships and parts stores.
Loading...