Advance Adapters 27-0040T User Manual
ADVANCE ADAPTERS INC. P/N: 27-0040T
P.O. Box 247, 4320 Aerotech Center Way
Paso Robles, CA 93447 PAGE 1 OF 1
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev . Date: 09-23-03
FORD 4WD P.U./ 29 SPLINE NV4500 TRANNY KIT
KIT CONSISTS OF:
No. Qty Part No. Description
1. 1 Kit 50-0220 4WD 29 SPLINE NV4500 TO FORD NP205 31T
2. 1 Kit 712551 DODGE NV4500 TO FORD V8 BHSG.
3. 1 Kit 716050D1 NV4500 SHIFT HANDLE ASSY.
4. 1 Kit 716101-2 CHEVY/NV4500 TRANS RUBBER MT.
INSTALLATION NOTES:
This kit is designed to fit the Dodge Standard Duty 29 spline NV4500 transmission.
This kit requires the use of a stock Ford bellhousing with a 4.848" index diameter.
Remove the stock tailhousing and install the new adapter housing provided in this kit. Refer to the 50-0207 Instruction
Sheet.
This is a parts pull sheet. Refer to the instruction sheet on each kit for proper installation.
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
Loading...