ADTRAN TSU ACE User Manual

Download

Page 1

TSU ACE P/N 1200295L1

NETWORK

Network

ETWORK CONNECTION PINOUT

NETWORK

For more detailed docum en tati on, visit us online at www.adtran.com

115VAC/60HZ .15A

V.35 NX56/64

NSTALLATION INFORMATION

OFF

Pin Name Description

1 R1 RXDATA Receive data from the Network - Ring 2 T1 RXDATA Receive data from the Network - Tip 3, 6, 7, 8 UNUSED n/a 4 R TXDATA Transmit data towards the Network - Ring

• An eight-position modu lar ja ck (labe led N

ETWORK

) is provided to connect to the ne twork T1 circuit. The pinout is provided on this Quick Start Guide. See

Chapter 2, Installa tion,

of the TSU ACE User Manual

for more information.

• The rear panel contains a single V.35 interface for connecting to DTE equipment. The pinout for this interface is located in

Appendix C

of the

TSU ACE User Manual.

5 T TXDATA Transmit data towards the Network - Tip

• When shipped from the factory, the TSU ACE is uninitialized and set to

factory default conditions. At the first application of power, the unit will

EAR PANEL DESCRIPTIONS

Network Connector Connection to T1 circuit V.35 Connector High-speed DTE interface

automatically exec ute self-tests followed by an initialization sequence.

• The TSU ACE can be configured and controlled using the local front panel of the unit or from ADTRAN’s PC Control Program, T -WATCH. A limited menu tree is provid ed on the bac k of this sh eet. For mo re

Power Switch Turns power to the TSU on or off

115 VAC Connection

Power cord connect ion for a re li abl y gr oun ded 115 VAC, 60 Hz power source

detailed menu information, refer to the TSU User Manual.

• Additional information can be found on the product CD which contains the TSU ACE User Manual, FAQs, Data Sheets, Applications, and White Papers.

Page 2

TSU ACE P/N 1200295L1

ENU TREE

MAIN MENU 2) PORT

VERVIEW

- O

1) NI PERF REPORTS

1) STATUS 2) CURR ERR/ALM

3) ERR/ALM HISTORY

2) CONFIG 1) NETWORK (NI)

1) TIME/DATE

2) SOFTWARE REV Displays the current software revision

3) UTIL 3) REINIT UNIT

4) ADDRESS

5) SET PASSCODE

6) KEYPAD

7) FACTO RY RESTORE Returns all configurati ons to factory settings

1) NETWORK TESTS

4) TEST 2) RUN SELF-TEST

3) PORT TESTS