ADTRAN NetVanta 838 User Manual

NetVanta 838
Smart Solutions for a Connected World.
Carrier Ethernet Network Termination
International
Product Features
■ 8-port EFM bonded e.SHDSL
■ Up to 45 Mbps of resilient
Carrier Ethernet service
■ Certified MEF9, 14 Traffic
Management Compliant
■ 1 RMU stackable with wall-
mount or rackmount options
■ Rapid deployment via
EZ-Ethernet Provisioning
■ Standards based
OAM supported
■ Monitoring, fault detection,
and loopback functions
■ TScan advanced
loop diagnostics
■ Flexible Bandwidth
management
■ Performance monitoring
with threshold alarms
■ Configurable Queuing for
CoS support
■ Command Line Interface (CLI)
■ Traffic storm protection to
prevent service interruptions due to broadcast, multicast, unicast or L2CP traffic
■ Small Form-factor Pluggable
(SFP) 1000Base-X Ethernet
■ Autosensing 10/100 Base-T
Ethernet connections
■ Industry-leading warranty
Ethernet is the undisputed, global choice for Metro Access Networks (MANs) and Local Access Networks (LANs). However, existing
copper access networks do not facilitate an end-to-end high-bandwidth connection, creating a bottleneck. This bottleneck is the first mile of access. This refers to the access link (most often a TDM-based copper circuit) from the business customer’s office LAN to their service provider’s MAN. ADTRAN affords service providers the ability to remove this bottleneck through the utilization of an improved data transmission standard. This standard, ITU-T G.998.2, is known as Ethernet in the First Mile (EFM). ADTRAN EFM over Copper (EoCu) defines a way to effectively and universally bond together, lower band­width copper loops or pairs of wires creating a Carrier Ethernet access connection.
This innovative EoCu solution enables service providers to extend packet-based business-class services beyond the reach of their fiber network by leveraging the existing investment of copper-based TDM business services assets. This means leveraging the full advantages of TDM, the most understood, successful, and ubiquitous business service infrastructure. Due to budget restrictions and time to market requirements, deploying fiber to address uneven or disperse service demand is not feasible, leaving a large percentage of businesses to rely on copper business access.
The ADTRAN EoCu solution is comprised of the NetVanta 800 family of NTU and can be launched from our Total Access 3000 and Total Access 5000 platforms. The NetVanta 830 Series NTU delivers enhanced data rate capabilities to deliver up to 45 Mbps of Ethernet service over bonded e.SHDSL. The NetVanta 810 Series NTU leverages the existing copper-based TDM business services assets to rapidly extend Ethernet service to any customer who currently uses DS1 or E1 service. The NetVanta 873 can EFM bond up to three DS3 connections to deliver up to 134 Mbps of Carrier Ethernet service.
Quality of Service Flexibility and Assurance
The NetVanta 800 Series deliver packet flow capabilities certified compliant per the Metro Ethernet Forum. These packet flow capa­bilities offer the traffic classification and bandwidth profiling capabilities required to offer customers a flexible, tiered service offer. In addition to this highly configurable, granular bandwidth selection toolset enabling Quality of Service (QoS) options, these same network termination points support the standards-based measurement and moni­toring capabilities required to maintain a carrier-grade Ethernet network. All of this allows providers to create and meet customer SLA agreements.
Reliable Service Connection Mechanisms
In the event a single loop fails, the NetVanta 800 offers resiliency, maintaining traffic over the remaining active loops in order to maintain service. Once the failed loop is operational again, the NetVanta will auto­matically detect its availability and return the loop to the bonded group, providing the orig­inal provisioned customer bandwidth. When deployed through the Total Access 5000, these NTUs tap into an unparalleled array of copper loop diagnostic tools that afford an even greater service assurance level.
Simplified Service Delivery
In order to improve service time to market and reduce deployment costs, the NetVanta 800 Series delivers a feature set designed to simplify service deployment and mainte­nance. ADTRAN Total Access EMS employs EZ-Ethernet Provisioning, minimizing the number of steps to provision a new service. The EIA-232 craft port enables local access for configuration and status information. A management VLAN is used to remotely configure and collect status information. The compact chassis and flexible deployment options offer wallmount or rackmount for superior flexibility. When wallmounted, any NetVanta 800 only occupies a 17-inch by 10-inch area of the customer’s telephone wiring closet. For rackmount installations, custom 19-inch rackmount shelves are available.
International Department
DSLAM
4 x 10/100Base-T
or GigE SFP
NetVanta 838
4 x 10/100Base-T
or GigE SFP
Metro Ethernet
& IP Core
1– 8 EFM Bonded
e.SHDSL Pairs
LAN
Router
Total Access 838
1-8 EFM Bonded
e.SHDSL Pairs
NxGigE
NetVanta 838
4 x 10/100Base-T
or GigE SFP
Small/Medium
Business
10 RU
Total Access 5000 (ETSI)
901 Explorer Boulevard
Huntsville, Alabama 35806
www.adtran.com/global
international@adtran.com
International Customer Service
Canada Headquarters—Toronto,
EMEA Regional Headquarters—
+1 256 963 8716 voice
Asia—Beijing, China
+86 10 8527 5010 fax
sales.china@adtran.com
sales.asia@adtran.com
Asia—Bangkok, Thailand
sales.asia@adtran.com
sales.asia@adtran.com
Australia/New Zealand—
Melbourne, Australia
sales.australia@adtran.com
Australia/New Zealand—
sales.australia@adtran.com
Canada—Montreal, Quebec
sales.canada@adtran.com
sales.canada@adtran.com
sales.emea@adtran.com
sales.europe@adtran.com
Mexico/Central America/
sales.latin@adtran.com
sales.caribbean@adtran.com
sales.mexico@adtran.com
sales.ai@adtran.com
South America—USA
sales.latin@adtran.com
sales.brazil@adtran.com
sales.ai@adtran.com
ADTRAN is an ISO 9001, ISO 14001,
and a TL 9000 certified supplier.
I61200633G4-8A January 2008
Copyright © 2008 ADTRAN, Inc.
ADTRAN, Inc.
USA
U.S. Headquarters
+1 256 963 8000
+1 256 963 6300 fax
+86 10 8527 5011
Hong Kong
+852 3187 7111
+852 2116 4084 fax
+66 2 625 3085
+66 2 625 3142 fax
Asia—Singapore
+65 6248 4665
+65 6320 8521 fax
+61 3 9658 0500
+61 3 9658 0599 fax
Sydney, Australia
+61 2 9959 2485
+61 2 9959 2244 fax
+1 877 923 8726 +1 514 940 2888
+1 514 989 3198 fax
Ontario
+1 877 923 8726
+1 514 989 3198 fax
United Kingdom
+44 1256 884055
+44 1256 884056 fax
Caribbean—USA
+1 256 963 4833
+1 256 963 6300 fax
+1 256 963 3113
+1 256 963 6300 fax
All rights reserved.
NetVanta 838
8-port EFM over e.SHDSL
Product Specifications
Physical Interface
Network Interface: e.SHDSL – RJ21
Customer: Four autosensing 10/100Base-T Ethernet
• RJ-45
• Auto MDI/MDIX
• Auto-Rate
• Auto-Duplex
Gigabit Ethernet Interface
Interface Type: 1000 Base-X
Connector: Single SFP
Compliance: 802.3, 802.1D, 802.1Q
Management: Console port
• DB-9
• EIA-232
Diagnostic LEDs
Power/Alarm LED
SHDSL loop status for each loop
Ethernet LED
Features:
E-Line support
Mini jumbo frame support (1700 Bytes)
Efficient EFM bonding
Q in Q
Flexible bandwidth profiles for rate limiting
Traffic classification options include CE-VLAN,
port, p-bit, DSCP
SNMP support
Standards Compliant
IEEE 802.1p priority marking
IEEE 802.1d dynamic/transparent bridging
IEEE 802.1q VLAN tagging
IEEE 802.3-ah EFM standard
IEEE 802.3u Ethernet
MEF 9,14
ADTRAN believes the information in this publication to be accurate as of publication date, and is not responsible for error. Specifications subject to change without notice. ADTRAN, NetVanta, and Total Access are registered trademarks of ADTRAN, Inc. and its affiliates in the U.S. and certain other countries. All other trademarks mentioned in this document are the property of their respective owners.
ADTRAN products may be subject to U.S. export controls and other trade restrictions. Any export, re-export, or transfer of the products contrary to law is prohibited. For more information regarding ADTRAN’s export license, please visit www.adtran.com/exportlicense
Management & Administration
Craft interface (local, EIA-232)
Remote firmware upgrades
Local: YMODEM through craft port
Remote: Managed through Total Access 3000,
Total Access 5000
Flow through provisioning via Total Access EMS
Supports OAM management status and
loopback messaging
Configuration script download
Environment
Operating Temperature: -40 C to +65 C
Storage Temperature: -40 C to + 85 C
Relative Humidity: Up to 95%, noncondensing
Physical
Dimensions: 44 mm H, 437 mm W, 254 mm D
Weight: 3.6 kg
DC Power: -48 VDC or +/-24 VDC (A or B power feed)
Agency Approvals
FCC Part 15 Class A
FCC Part 68
UL 60950, CAN/CSA C22.2 No. 60950
EN 60950, IEC 60950, AS 3260/ AS NZS60950
NEBS Level 3
S043.2
ITU-T K21:2000 Basic
Ordering Information
Equipment Part #
NetVanta 838 1200633G4
48VDC Power Supply, US Cord 1202470E1
48VDC Power Supply, Eu Cord 1202470E2
48VDC Power Supply, UK Cord 1202407L3
48VDC Power Supply, US Cord 1202407L4
Loading...