ADTRAN NetVanta 1224STR DC User Manual
Solution Benefits
■
Converged LAN/WAN
architecture
■
Lower total cost of ownership
■
Efficient bandwidth usage
■
Space-savings, equipment
consolidation
■
Simplified network
administration
Product Features
■
Full-featured, managed
Layer 2 switch-router,
DC-powered
■
24-port Ethernet, Fast
Ethernet, and Gigabit
Ethernet functionality
■
Unique all-in-one switching/
routing/firewall/VPN platforms
■
Ideal for co-location; carrier
networks
■
8.8 Gbps switching capacity,
non-blocking
■
Gigabit SFP/1000Base-T uplink/
stacking capability available
■
Stacking up to 16 switches
with single IP address
management
■
Link Aggregation, GVRP,
and LLDP
■
MAC-based port security
■
SIP ALG for NAT traversal in
VoIP applications
■
Easily recognizable Command
Line Interface (CLI)
■
Intuitive web-based Graphical
User Interface (GUI)
■
Free firmware updates
■
Unlimited, responsive,
toll-free technical support
■
Industry-leading five-year
North American warranty
NetVanta 1224STR DC
All-in-One Network Access: Modular WAN Interface, Firewall,
Ethernet Switch, IP Router, and Optional VPN
The NetVanta®1000 Series from ADTRAN®is
a standards-based, non-blocking Layer 2
switching solution available at a cost up to
50 percent less than competing switches.
These devices are suitable for converged
LAN/WAN access, interconnecting LAN devices,
or for network segmentation. This series
includes the NetVanta 1224R, 1224STR, and
1224STR DC, unique, all-in-one access platforms that combine a 24-port Ethernet switch,
an IP access router, a modular WAN interface
with built-in DSU/CSU, a stateful inspection
firewall, and the option for Virtual Private
Networking (VPN), all in a single 1U chassis.
The 1224STR and STR DC provide 24-port
Ethernet and Fast Ethernet switching and a
1000Base-T/SFP Gigabit port for uplink or
stacking capability. The 1224STR DC is ideal for
carrier networks requiring +24/-48VDC power.
Modular Hardware
A single WAN access slot in the back of the
NetVanta chassis supports a variety of Network
Interface Modules (NIMs) including ADSL,
56/64k, T1/FT1, T1/FT1 with DSX-1, E1/FE1,
E1/FE1 with G.703, Dual T1, or a serial interface.
The optional Analog or ISDN BRI Dial Backup
Modules (DIMs) support a solid business continuity plan by dialing around a failed circuit to
any PPP-compliant device. The ADSL NIM
may also be used for broadband backup,
allowing for larger bandwidth applications
and faster data rates.
Standard-based Protocols
Based on the ADTRAN Operating System (AOS),
these devices offer support for 802.1Q Virtual
LANs (VLANs), Port-based switching features
include Broadcast Storm Control, 802.1D and
802.1w Spanning/Rapid Spanning Tree, Link
Aggregation, Port Mirroring, and GVRP. Link
Layer Discovery Protocol (LLDP) auto-discovers
neighboring Ethernet devices, simplifying
integration into multi-vendor environments.
In addition the integral IP router provides costeffective Internet access, corporate Frame Relay
or point-to-point connectivity using standard
routing protocols such as BGP, OSPF and RIP.
Security
Rest assured, with the NetVanta 1224R and STR
your network is protected. Each platform comes
standard with a stateful inspection firewall to
stop intruders and common Denial of Service
(DoS) attacks. These products also offer a
variety of data security features including
MAC-based port security, multilevel user passwords, Secure Shell (SSH) and Secure Socket
Layer (SSL) for encrypted user login, and Access
Authentication and Authorization (AAA) for
authentication with a RADIUS or RSA SecurID
server. For added security, these platforms offer
a VPN upgrade supporting up to 500 IPSec
tunnels using DES, 3DES or AES encryption.
Quality of Service (QoS)
These switch-routers support QoS to prioritize
mission critical traffic and control network
congestion at various layers of the OSI model.
Ont the LAN, the NetVanta 1000 Series offers
802.1p and DiffServ Class of Service (CoS).
To assign priority to traffic, Weighted Round
Robin and Strict Priority Queuing is used with
four egress queues per port. For the WAN,
DiffServ marking, Low Latency Queuing, and
Weighted Fair Queuing provide priority for IP
packets routed over the WAN. Together these
features offer a powerful end-to-end QoS story.
VoIP Ready
In combination with the QoS features, a specialized SIP Application Layer Gateway (ALG)
allows SIP traffic to traverse NAT-enabled
firewalls. For an enterprise network, this interoperability allows IP PBXs, phones, and other
SIP-based devices to set up, tear down, and
pass voice and call control messages seamlessly
through the integral NAT-enabled firewall.
Administration
The AOS offers both a Command Line Interface
(CLI) that mimics the widely deployed, industry
de facto standard and an intuitive web-based
GUI with step-by-step configuration wizards.
Together these interfaces allow you to administer and control your network in the best
method that meets your needs. For a centralized enterprise-wide management scheme,
ADTRAN offers n-Command
™
, an intuitive,
scalable software suite for managing firmware
revisions, push firmware upgrades and
configuration changes, backup and restore
configurations, and manage security policies
and Access Control Lists (ACLs).
NetVanta 1224STR DC
All-in-One Network Access: Modular WAN Interface, Firewall,
Ethernet Switch, IP Router, and Optional VPN
Product Specifications
Network Interfaces
24 Fast Ethernet Ports
■
10/100 Base-T■Auto-Duplex
■
Auto-Rate
■
Auto-MDI/MDI-X
Gigabit Ethernet Port
■
10/100/1000Base-T port for copper connectivity
■
SFP slot for optical connectivity
■
Auto-Duplex
■
Auto-Rate
■
Auto-MDI/MDI-X
NIM (Network Interface Modules)
■
56/64k
■
T1/FT1■Dual T1 ■ADSL
■
T1/FT1 with DSX-1 ■E1/FE1
■
E1/FE1 with G.703 ■Serial (V.35, X.21/V.11)
DIM (Dial Backup Interface Modules)
■
Analog Modem ■ISDN BRI ‘U’ and ‘ST’
Console Port
■
DB-9
Switching Performance
■
Non-blocking
■
8,000 MAC Addresses
■
16-MB memory shared by all ports
Maximum Forwarding Bandwidth
■
8.8 Gbps
Routing Performance
■
133 MHz Motorola MPC 866
■
32 MB DRAM
■
16 MB Flash
■
30,000 PPS
Status LEDs
■
Power
■
WAN: Link, Activity, Alarm, Test
■
DBU: Link, In DBU, Alarm, Test
■
Ethernet Port Status: Link, Activity, PoE Status
Protocols
■
BGP
■
PPP
■
OSPF
■
PPPoE
■
RIP (v1 and v2)
■
Multilink PPP
■
GRE
■
HDLC
■
IGMP v2
■
PPP Dial Backup
■
Frame Relay
■
PAP and CHAP
■
Multilink Frame Relay
DHCP
■
Client, Server and Relay
Spanning Tree Support
■
802.1D Spanning Tree ■ 802.1w Rapid Spanning Tree
Frame Relay
■
Point-to-Point
■
RFC 1490 Encapsulation (Multiprotocol Over Frame Relay)
■
LMI Types: LMI, CCIT T (Annex A), ANSI (Annex D), Static
VLAN Support
■
Port based VLANs
■
802.1Q tagged trunked VLANs
■
Support for up to 255 active VLANs
■
Inter-VLAN routing
■
GARP VLAN Registration Protocol (GVRP)
Link Aggregation
■
802.3ad Link Aggregation
■
Support for six trunk groups
■
Trunk groups consist of up to eight access ports
Class of Service (Switching-Layer 2)
■
Enforces 802.1p priorities ■ DiffServ
■
Four output queues per egress port
■
Weighted Round Robin or Strict Priority Queuing
Quality of Service (Routing-Layer 3)
■
Low Latency Queuing
■
Weighted Fair Queuing (WFQ)
■
DiffServ aware/mark
■
Frame Relay Fragmentation (FRF.12)
Security
Firewall
■
Stateful Inspection Firewall
■
Denial of Service (DoS) Protection
■
Access Control Lists (ACLs)
■
Application Level Gateways (ALGs)
Optional Virtual Private Network (VPN)
■
IPSec Mode: Tunnel
■
Encryption: DES, 3DES, and AES
■
Diffie Hellman Group Support: Group 1: MODP 768,
Group 2: MODP 1024
■
Hash Algorithms: MD5-HMAC and SHA1-HMAC
■
Authentication Mechanisms: XAUTH, X.509 Digital
Certificates, Preshared Keys, Secure ID, DSS
Signature
■
Key Management: IKE (ISAKMP/Oakley)
■
IKE Modes: Main, Aggressive, Perfect Forward
Secrecy, Mode Configuration
■
Dead Peer Detection
■
NAT Traversal V2
Network Address Translation
■
Basic NAT (1:1) and NAPT (Many:1)
■
NAT compatible SIP ALG
Secure Management
■
Multi-level access control
■
RADIUS AAA
■
SSH CLI and SSL GUI
Network Access Control
■
Port Authentication (802.1x)
■
MAC-based Port Security
Loading...