ADTRAN NetVanta 1224STR User Manual

NetVanta 1224R/1224STR
ADTRAN NetVanta products are VoIP-Ready! Inherent QoS functionality supports Voice over IP needs!
All-in-One Network Access: Modular WAN Interface, Firewall,
Solution Benefits
Converged LAN/WAN
architecture
Lower total cost of ownership
Efficient bandwidth usage
Space-savings, equipment
consolidation
administration
Product Features
Full-featured, managed
Layer 2 switch-routers
24-port Ethernet, Fast
Ethernet, and Gigabit Ethernet functionality
Unique all-in-one switching/
routing/firewall/VPN platforms
Interoperable in established,
multi-vendor networks
8.8 Gbps switching capacity,
non-blocking
Gigabit SFP/1000Base-T uplink/
stacking capability available
Stacking up to 16 switches
with single IP address management
Link Aggregation, GVRP,
and LLDP
MAC-based port security
SIP ALG for NAT traversal in
VoIP applications
Easily recognizable Command
Line Interface (CLI)
Intuitive web-based Graphical
User Interface (GUI)
Free firmware updates
Unlimited, responsive,
toll-free technical support
Industry-leading five-year
North American warranty
Ethernet Switch, IP Router, and Optional VPN
The NetVanta® 1000 Series from ADTRAN® is a standards-based, non-blocking Layer 2 switching solution available at a cost up to 50 percent less than competing switches.
These devices are suitable for converged LAN/ WAN access, interconnecting LAN devices, or for network segmentation. The NetVanta 1224R and 1224STR are unique, all-in-one access plat­forms that combine a 24 port Ethernet switch, an IP access router, a modular WAN interface with built-in DSU/CSU, a stateful inspection firewall, and the option for Virtual Private Networking (VPN), all in a single 1U chassis. The 1224R and STR provide 24-port Ethernet and Fast Ethernet switching, with the STR offering an extra 1000Base-T/SFP Gigabit port for uplink or stacking capability.
Modular Hardware
A single WAN access slot in the back of the NetVanta chassis supports a variety of Network Interface Modules (NIMs) including ADSL, 56/64k, T1/FT1, T1/FT1 with DSX-1, E1/FE1, E1/FE1 with G.703, Dual T1, or a serial interface. The optional Analog or ISDN BRI Dial Backup Modules (DIMs) support a solid business conti­nuity plan by dialing around a failed circuit to any PPP-compliant device. The ADSL NIM may also be used for broadband backup, allowing for larger bandwidth applications and faster data rates.
Standard-based Protocols
Based on the ADTRAN Operating System (AOS), these devices offer support for 802.1Q Virtual LANs ( VLANs), Port-based switching features include Broadcast Storm Control,
802.1D and 802.1w Spanning/Rapid Spanning Tree, Link Aggregation, Port Mirroring, and GVRP. Link Layer Discovery Protocol (LLDP) auto-discovers neighboring Ethernet devices, simplifying integration into multi-vendor envi­ronments. In addition the integral IP router provides cost-effective Internet access, corpo­rate Frame Relay or point-to-point connectivity using standard routing protocols such as BGP, OSPF and RIP.
Security
Rest assured, with the NetVanta 1224R and STR your network is protected. Each platform comes standard with a stateful inspection firewall to
stop intruders and common Denial of Service (DoS) attacks. These products also offer a variety of data security features including MAC-based port security, multilevel user pass­words, Secure Shell (SSH) and Secure Socket Layer (SSL) for encrypted user login, and Access Authentication and Authorization (AAA) with RADIUS, RSA SecurID or TACACS+. For added security, these platforms offer a VPN upgrade supporting up to 500 IPSec tunnels using DES, 3DES or AES encryption.
Quality of Service (QoS)
These switch-routers support QoS to prioritize mission critical traffic and control network congestion at various layers of the OSI model. Ont the LAN, the NetVanta 1000 Series offers
802.1p and DiffServ Class of Service (CoS). To assign priority to traffic, Weighted Round Robin and Strict Priority Queuing is used with four egress queues per port. For the WAN, DiffServ marking, Low Latency Queuing, Weighted Fair Queuing (WFQ), and Class­based WFQ provide priority for IP packets routed over the WAN. Together these features offer a powerful end-to-end QoS story.
VoIP Ready
In combination with the QoS features, a specialized SIP Application Layer Gateway (ALG) allows SIP traffic to traverse NAT-enabled firewalls. For an enterprise network, this interoperability allows IP PBXs, phones, and other SIP-based devices to set up, tear down, and pass voice and call control messages seam­lessly through the integral NAT-enabled firewall.
Administration The AOS offers both a Command Line Interface (CLI) that mimics the widely deployed, industry de facto standard and an intuitive web-based GUI with step-by-step configuration wizards. Together these interfaces allow you to admin­ister and control your network in the best method that meets your needs. For a centralized enterprise-wide management scheme, ADTRAN offers n-Command®, an intuitive, scalable soft­ware suite for managing firmware revisions, push firmware upgrades and configuration changes, backup and restore configurations, and manage security policies and Access Control Lists (ACLs).
NetVanta 1224STR Web-GUI
NetVanta 1224R/1224STR
All-in-One Network Access: Modular WAN Interface, Firewall, Ethernet Switch, IP Router, and Optional VPN
Product Specifications
Network Interfaces
NIM (Network Interface Modules)
E1/FE1
E1/FE1 with G.703
ADSL
SHDSL
Serial (V.35, X.21/V.11)
T1/FT1
T1/FT1 with DSX-1
Dual T1
56/64K
DIM (Dial Backup Interface Modules)
Analog Modem
ISDN BRI ‘ST’ and ‘U’
24 Fast Ethernet Ports
10/100Base-T
Auto-rate
Auto-duplex
Auto-MDI/MDI-X
Gigabit Ethernet Port (1224STR PoE)
Two combo Gigabit Ethernet port
supporting both 10/100/1000Base-T and SFP for copper or optical connectivity
Auto-duplex
Auto-rate
Auto-MDI/MDI-X
Console Port
DB-9
Switching Performance
Non-blocking
8,000 MAC Addresses
16-MB memory shared by all ports
Maximum Forwarding Bandwidth
1224R: 4.8 Gbps
1224STR: 6.8 Gbps
Routing Performance
133 MHz Motorola MPC 866 ■ 32 MB DRAM
16 MB Flash
30,000 PPS
Status LEDs
Power
WAN: Link, Activity, Alarm, Test
DBU: Link, In DBU, Alarm, Test
Ethernet Port Status: Link, Activity, PoE Status
Protocols
eBGP/iBGP
OSPF
RIP (v1 and v2)
PIM Sparse Mode
Demand Routing
Policy-based Routing
GRE
ATM (ADSL)
Frame Relay
Multilink Frame Relay
Layer 3 Backup
PPP
Multilink PPP
PPPoE
PPPoA
IGMP v2
RFC 1483
HDLC
PPP Dial Backup
PAP and CHAP
Multihoming
DHCP
Client, Server, and Relay
Spanning Tree Support
802.1D Spanning Tree
802.1w Rapid Spanning Tree
Frame Relay
Point-to-Point
RFC 1490 Encapsulation (Multiprotocol Over Frame Relay)
LMI Types: LMI, CCITT (Annex A), ANSI (Annex D), Static
VLAN Support
Port based VLANs
802.1Q tagged trunked VLANs
Support for up to 255 active VLANs
Inter-VLAN routing
GARP VLAN Registration Protocol (GVRP)
Link Aggregation
802.3ad Link Aggregation
Support for six trunk groups
Trunk groups consist of up to eight access ports
Class of Service (Switching-Layer 2)
Enforces 802.1p priorities
DiffServ
Four output queues per egress port
Weighted Round Robin
Strict Priority Queuing
Quality of Service (Routing-Layer 3)
Low Latency Queuing
Weighted Fair Queuing (WFQ)
DiffServ aware/mark
Frame Relay Fragmentation (FRF.12)
Security
Firewall
Stateful Inspection Firewall
Denial of Service (DoS) Protection
Access Control Lists (ACLs)
Application Level Gateways (ALGs)
Optional Virtual Private Network (VPN)
IPSec Tunnel Mode: 500 Tunnels
Encryption: DES, 3DES, and AES
Diffie Hellman Group Support:
Group 1: MODP 768
Group 2: MODP1024
Hash Algorithms: MD5-HMAC and SHA1-HMAC
Authentication Mechanisms: XAUTH, X.509 Digital Certificates, Preshared Keys, Secure ID, DSS Signature
Loading...
+ 2 hidden pages