ADTRAN NetVanta 1224STR PoE, NetVanta 1224R PoE User Manual

Solution Benefits
ADTRAN NetVanta products are VoIP-Ready! Inherent QoS functionality supports Voice over IP needs!
Converged LAN/WAN
architecture
Lower total cost of ownership
Efficient bandwidth usage
Space-savings, equipment
consolidation
administration
Product Features
Full-featured, managed
Layer 2 switch-routers
24-port Ethernet, Fast
Ethernet, and Gigabit Ethernet functionality
Unique all-in-one
switching/ routing/ firewall/VPN platforms
Interoperable in established,
multi-vendor networks
8.8 Gbps switching capacity,
non-blocking
Gigabit SFP/1000Base-T
uplink/stacking capability available
Stacking up to 16 switches
with single IP address management
Link Aggregation, GVRP,
and LLDP
MAC-based port security
SIP ALG for NAT traversal in
VoIP applications
Easily recognizable Command
Line Interface (CLI)
Intuitive web-based Graphical
User Interface (GUI)
Free firmware updates
Industry-leading support,
service, and warranty
International
NetVanta 1224R PoE/1224STR PoE
All-in-One Network Access with Power of Ethernet: Modular WAN interface, Firewall, Ethernet Switch, IP Router, and Optional VPN
The NetVanta 1000 Series from ADTRAN is a standards-based, non-blocking Layer 2 switching solution suitable for converged LAN/WAN access, interconnecting LAN devices, for network segmentation, or for powering LAN network devices. The NetVanta 1224R
PoE (Power over Ethernet) and 1224STR PoE are unique, all-in-one access platforms that combine a 24-port Ethernet switch, an IP access router, a modular WAN interface with built-in NTU, a stateful inspection firewall, and the option for Virtual Private Networking (VPN), all in a single 1U chassis. The 1224R PoE and 1224STR PoE provide 24-port Ethernet and Fast Ethernet switching, with the 1224STR PoE offering two extra 1000Base-T/SFP Gigabit ports for uplink or stacking capability.
Modular Hardware
A single WAN access slot in the back of the NetVanta chassis supports a variety of Network Interface Modules (NIMs) including E1/FE1, E1/FE1 with G.703, ADSL, SHDSL, Serial, T1/FT1, T1/FT1 with DSX-1, or a Dual T1 interface. The optional Analog or ISDN BRI Dial Backup Modules (DIMs) support a solid business continuity plan by dialing around a failed circuit to any PPP-compliant device. The ADSL NIM may also be used for broadband backup, allowing for larger bandwidth applications and faster data rates.
Standard-based Protocols
Based on the ADTRAN Operating System (AOS), these devices offer support for 802.1Q Virtual LANs (VLANs), port-based switching features include Broadcast Storm Control, 802.1D and
802.1w Spanning/Rapid Spanning Tree, Link Aggregation, Port Mirroring, and GVRP. Link Layer Discovery Protocol (LLDP) auto-discovers neighboring Ethernet devices, simplifying inte­gration into multi-vendor environments. In addition, the integral IP router provides costef­fective Internet access, corporate Frame Relay or point-to-point connectivity using standard routing protocols such as BGP, OSPF and RIP.
Power over Ethernet
The NetVanta 1224R PoE and 1224STR PoE platforms provide standards-based 802.3af PoE functionality for powering IP phones, Wireless Access Points (WAPs), or other devices requiring LAN power. The products support up to 15.4 watts per port or 370 watts total.
Security
Rest assured, with the NetVanta 1224R PoE and 1224STR PoE your network is protected. Each platformcomes standard with a stateful inspection firewall to stop intruders and common Denial of Service (DoS) attacks. These products also offer a variety of data security features including MAC-based port security, multilevel user passwords, Secure Shell (SSH) and Secure Socket Layer (SSL) for encrypted user login, and Access Authentication and Authorization (AAA) with RADIUS, RSA SecurID, or TACACS+. For added security, these platforms offer a VPN upgrade supporting up to 500 IPSec tunnels using DES, 3DES or AES encryption.
Quality of Service (QoS)
The NetVanta switch-routers support QoS to prioritize mission critical traffic and control network congestion at various layers of the OSI model. On the LAN, the NetVanta 1000 Series offers 802.1p and DiffServ Class of Service (CoS). To assign priority to traffic, Weighted Round Robin and Strict Priority Queuing is used with four egress queues per port. For the WAN, DiffServ marking, Low Latency Queuing, and Weighted Fair Queuing provide priority for IP packets routed over the WAN. Together these features offer a powerful end-to-end QoS story.
VoIP Ready
In combination with the QoS features, a special­ized SIP Application Layer Gateway (ALG) allows SIP traffic to traverse NAT-enabled firewalls. For an enterprise network, this interoperability allows IP PBXs, phones, and other SIP-based devices to set up, tear down, and pass voice and call control messages seamlessly through the integral NAT-enabled firewall.
Administration
The AOS offers both a Command Line Interface (CLI) that mimics the widely deployed, industry de facto standard and an intuitive web-based GUI with step-by-step configuration wizards. For a centralized enterprise-wide management scheme, ADTRAN offers n-Command, an intuitive, scalable software suite for managing firmware revisions, push firmware upgrades and configuration changes, backup and restore configurations, and manage security policies and Access Control Lists (ACLs).
www.adtran.com/global
NetVanta 1224STR Web-GUI
NetVanta 1224R PoE/1224STR PoE
All-in-One Network Access with Power of Ethernet: Modular WAN interface, Firewall, Ethernet Switch, IP Router, and Optional VPN
Product Specifications
Network Interfaces
NIM (Network Interface Modules)
E1/FE1
E1/FE1 with G.703
ADSL
SHDSL
Serial (V.35, X.21/V.11)
T1/FT1
T1/FT1 with DSX-1
Dual T1
56/64K
DIM (Dial Backup Interface Modules)
Analog Modem ■ ISDN BRI ‘ST’ and ‘U’
24 Fast Ethernet Ports
10/100Base-T ■ Auto-duplex
Auto-rate
Auto-MDI/MDI-X
Gigabit Ethernet Port (1224STR PoE)
Two combo Gigabit Ethernet port
supporting both 10/100/1000Base-T and SFP for copper or optical connectivity
Auto-duplex
Auto-rate
Auto-MDI/MDI-X
Console Port
DB-9
Switching Performance
Non-blocking
8,000 MAC Addresses
16-MB memory shared by all ports
Maximum Forwarding Bandwidth
1224R PoE: 4.8 Gbps
1224STR PoE: 8.8 Gbps
Routing Performance
133 MHz Motorola MPC 866 ■ 32 MB DRAM
16 MB Flash
30,000 PPS
Status LEDs
Power
WAN: Link, Activity, Alarm, Test
DBU: Link, In DBU, Alarm, Test
Ethernet Port Status: Link, Activity
Protocols
eBGP/iBGP
OSPF
RIP (v1 and v2)
PIM Sparse Mode
Demand Routing
Policy-based Routing
GRE
ATM (ADSL)
Frame Relay
Multilink Frame Relay
Layer 3 Backup
PPP
Multilink PPP
PPPoE
PPPoA
IGMP v2
RFC 1483
HDLC
PPP Dial Backup
PAP and CHAP
Multihoming
DHCP
Client, Server, and Relay
Spanning Tree Support
802.1D Spanning Tree
802.1w Rapid Spanning Tree
Frame Relay
Point-to-Point
RFC 1490 Encapsulation (Multiprotocol Over
Frame Relay)
LMI Types: LMI, CCITT (Annex A), ANSI (Annex D), Static
VLAN Support
Port-based VLANs
802.1Q tagged trunked VLANs
Support for up to 255 active VLANs
Inter-VLAN routing
GARP VLAN Registration Protocol (GVRP)
Power over Ethernet
802.3af (15.4 watts/port)
370 total watts
Power provided over Ethernet data leads
Link Aggregation
802.3ad Link Aggregation
Support for six trunk groups
Trunk groups consist of up to eight access ports
Class of Service (LAN Traffic)
Enforces 802.1p priorities ■ DiffServ
Four output queues per egress port
Weighted Round Robin ■ Strict Priority Queuing
Quality of Service (WAN Traffic)
Low Latency Queuing
Weighted Fair Queuing (WFQ)
Class-based WFQ
DiffServ aware/mark
Frame Relay Fragmentation (FRF.12)
Security
Firewall
Stateful Inspection Firewall
Denial of Service (DoS) Protection
Access Control Lists (ACLs)
Application Level Gateways (ALGs)
Optional Virtual Private Network (VPN)
IPSec Tunnel Mode: 500 Tunnels
Encryption: DES, 3DES, and AES
Diffie Hellman Group Support:
Group 1: MODP 768
Group 2: MODP1024
Hash Algorithms: MD5-HMAC and
SHA1-HMAC
Authentication Mechanisms:
XAUTH, X.509 Digital Certificates, Preshared Keys, Secure ID, DSS Signature
Key Management: IKE (ISAKMP/Oakley)
Loading...
+ 2 hidden pages