ADTRAN MX408e User Manual
Pseudowire Gateway
MX408e
Low-profile, High-density PWE3 Solution
Product Features
■ High capacity delivering up
to eight T1 or E1 circuits over
packet-switched networks
■ Increased service support via
fractional T1/E1 delivery
■ Flexible implementation due
to standards-based Circuit
Emulation Services delivering
both SAToP and CESoPSN for
bandwidth efficiency and appli
cation flexibility respectively.
■ Carrier-grade TDM delivery
over best-effort packet
networks provided by adaptive
timing recovery
■ TDM voice quality preserved
through
management and support for
BITS clock input
■ Prioritizes voice traffic through
VLAN tagging and priority
labeling
■ Supports remote management
through an intuitive CLI inter
face, ADTRAN Total Access
EMS, or SNMP
■ Configurable Pseudowire
payload length for tuning of
bandwidth and latency
■ Industry leading ten-year
warranty
automatic jitter buffer
-
Migration to IP/Ethernet
The prevalence of new Ethernet delivered
services requires increased investment in
new packet networks. Customers demand the
continued support of non-Ethernet services
such as TDM voice and data which raises a
concern regarding the cost impact of
supporting two networks — one IP and one
TDM-based. With the ADTRAN® MX408e
Pseudowire Gateway, Ethernet service delivery
is consolidated onto a single multi-service
-
network supporting the delivery of costeffective broadband service and legacy service
revenue streams. ADTRAN’s pseudowire
solution reduces operational costs by retiring
expensive TDM leased lines.
Evolution to IP Backhaul
Service Providers are constantly looking for
ways to drive down the operating costs of
delivering both new broadband and legacy
voice services. As Triple Play, 1xEV-DO, PON,
HSPA, and IP Multimedia Subsystems (IMS),
drive the transformation of both the access
and core networks to IP, the backhaul network
that resides between must keep pace. Since it
is difficult to scale TDM backhaul as bandwidth needs grow, long-term profitability is
not viable with TDM-based backhaul.
Pseudowire Extends the Value
of Ethernet Access
ADTRAN Pseudowire Ethernet solutions
enable the consolidation of service delivery
onto a single network. Operational costs can
be significantly reduced by retiring expensive
TDM leased lines and consolidating broadband and TDM voice services onto a single
Ethernet network. In many cases, ADTRAN
Pseudowire solutions can offer a six month
Return On Investment (ROI).
ADTRAN, Inc.
901 Explorer Boulevard
Huntsville, AL 35806
P.O. Box 140000
Huntsville, AL 35814-4000
256 963 8000 voice
256 963 8030 fax
Pseudowire Gateway
MX408e
Low-profile, High-density PWE3 Solution
Product Specifications
General Information
800 9ADTRAN
info@adtran.com
www.adtran.com
Pre-Sales
Technical Support
888 5ADTRAN
support@adtran.com
www.adtran.com/support
Where to Buy
www.adtran.com/where2buy
www.adtran.com/support
International Inquiries
international@adtran.com
www.adtran.com/international
ADTRAN is an ISO 9001, ISO 14001
and a TL 9000 certified supplier.
Copyright © 2008 ADTRAN, Inc.
All rights reserved. Printed in the U.S.A.
800 827 0807
Post-Sales
Technical Support
800 726 8663
support@adtran.com
Regional Offices
Dallas, TX
972 830 9070
Denver, CO
303 471 9150
Kansas City, KS
800 471 8649
Newark, NJ
800 471 8656
Ontario, Canada
416 290 0585
Quebec, Canada
877 923 8726
San Antonio, TX
888 223 7671
+1 256 963 8716 voice
+1 256 963 6300 fax
61189608L1-8D March 2008
Customer Access Interfaces
■
T1 Interfaces
• Interface type: DSX-1
• Connectors: 8x RJ-48
• Line build out: 0 to 655 feet
• Line rate: 1.544 Mbps
• Line code: AMI, B8ZS
• Framing: ESF, D4, Unframed
■
T1/E1 Interfaces
• Connectors: 8xRJ-48 (120
• Line rate: 2.048 Mbps
• Line code: HDB3 or AMI
• Framing: CAS, CCS, Unframed
• Compliance: ITU G.703, G.704
■
10/100Base-T Ethernet Interfaces
• Interface type: 10/100BaseT
• Connectors: 4x RJ-45
• Compliance: IEEE 802.3, 802.1D, 802.1Q
Ω Balanced)
Network Uplink Interfaces
■
10/100Base-T Ethernet Interface
• Interface type: 10/100BaseT
• Connector: Single RJ-45
• Compliance: IEEE 802.3, 802.1D, 802.1Q
■
Gigabit Ethernet Interface
• Interface type: 1000Base-X
• Connector: Single SFP
• Compliance: IEEE 802.3, 802.1D, 802.1Q
T1/E1-based Pseudowire
■
T1/E1 Interfaces
• Structure-agnostic: IETF RFC 4553 Structure Agnostic Time division multiplexing over Packet
(SAToP)
• Structure-aware: IETF draft- Vainshtein circuit
emulation services over packet-switched network
(CESoPSN) pseudowire support
• Jitter Buffer: Programmable up to 100 milliseconds
• Automatic Jitter Buffer Adjustment: Optimizes jitter
buffer settings based on observed packet jitter in
delivery network
QoS Management
• Layer 2 Marking: 802.1Q VLAN tagging per
emulated T1
• Compliance: IEEE 802.1D, 802.1Q
• Maximum simultaneous VLANs: 256
• Class of Service: 4 Priority Levels
• Diffserv code point marking
Specifications subject to change without notice. ADTRAN and Total Access are
registered trademarks of ADTRAN, Inc. All registered trademarks and trade
marks mentioned in this publication are the property of their respective owners.
-
Mechanical
■
Dimensions
• 1.7H x 7.7D x 17.1W (in.)
• 44H x 196D x 435W (mm)
■
Weight
• 8 lbs. (3.6 kg)
Alarms
• External alarm contacts for critical, major and
minor alarms
• Normally open and normally closed pinouts
• 4 Auxiliary Input pins
Electrical
• Power: ±24 VDC or -48 VDC, 20 Watts
Regulatory Standards
• NEBS Level 3
• UL 60950 and ETL
• IEC/EN 60950 RoHS compliance
Management
■
VT100 Interface
• EIA-232 compatible, female DB-9 connector
• Embedded CLI access
Remote Management
■
Management VLAN
• Telnet access of up to 6 simultaneous users
■
SNMP
• Supported MIBs: RFC1213, RFC2863, RFC3635,
RFC4188, RFC4363, ADTRAN Enterprise MIB
Environment
• Operating Temperature: -40°C to 65 °C
• Storage Temperature: -40°C to 85 °C
• Relative Humidity: GR-63-CORE
Ordering Information
Equipment Part #
MX408e (T1/E1) 1189608L1
MX408e (T1/E1, RoHS) 1189608G1
AC Power Supply 1175043L3
Loading...