ADTRAN IQ User Manual

For more detailed documentation, visit us online at www.adtran.com

IQ SERIES T1 + DSX-1 NETWORK INTERFACE MODULE (NIM) P/N 1202803L1

SPECIFICATIONS (CONTINUED)

Environmental

Operating Temperature: Storage Temperature: Relative Humidity:

0 to 50 C

-40 to 85 C Up to 95% non-condensing

SPECIFICATIONS

Network Interface

Framing: SF / ESF with auto detection Line Coding: AMI / B8ZS Input signal: to -36 dB Clock Source: network or internal Line Build Out: 0, -7.5dB, -15 dB, -22.5dB Data Rate: 56k or 64k Connector: RJ-48

DSX-1 Interface

Framing: SF / ESF with auto detection Line Coding: AMI / B8ZS Input signal: 0 to -7.5 dB Data Rate: 56k or 64k synchronous Line Build Out: 0 - 655 ft Connector: RJ-48

INSTALLATION INSTRUCTIONS

1. Remove the power from the unit.

2. Slide the option module into the option slot until the module is firmly seated against the front of the chassis.

3. Secure the pins at both edges of the module.

4. Connect the cables to the associated device(s).

5. Complete installation of the Base Unit.

6. Restore power to the unit.

Compliance

FCC Part 15, Class A FCC Part 68 Industry Canada CS03 UL and CUL

IQ SERIES T1 + DSX-1 NETWORK INTERFACE MODULE (NIM) P/N 1202803L1

T1 NETWORK (RJ-48C) CONNECTION PINOUT

Pin Name Description

1 R1 Receive data from the network 2 T1 Receive data from the network 3 — UNUSED 4 R Transmit data toward the networ k 5 T Transmit data toward the network 6-8 — UNUSED

DSX-1 INTERFACE (RJ-48C) PINOUT

Pin Name Description

1 R1 Transmit data toward the DTE

For more detailed documentation, visit us online at www.adtran.com

2 T1 Transmit data toward the DTE 3 — UNUSED 4 R Receive data from the DTE 5 T Receive data from the DTE 6-8 — UNUSED