ADS-TEC VMT5015 User Manual

Version 4.1

User Manual

Terminals VMT5015

Product Portfolio

Terminals VMT5015

Raiffeisenstr.14

D-70771 Leinfelden-Echterdingen

Germany

Terminals VMT5015

INDEX

ABOUT US .......................................................................................................................................... 5

1 REMARKS ................................................................................................................................. 6

1.1 RELEVANT DOCUMENTATION FOR THIS DEVICE ................................................................................. 6

1.2 USED SYMBOL EXPLANATION ....................................................................................................... 6

1.3 DATA, FIGURES AND MODIFICATIONS ............................................................................................ 6

1.4 TRADE MARKS ........................................................................................................................ 7

1.5 COPYRIGHTS .......................................................................................................................... 7

1.6 ENVIRONMENTAL CONDITIONS .................................................................................................... 8

1.7 STANDARDS ........................................................................................................................... 9

1.8 EQUIPMENT VERSIONS .............................................................................................................. 9

1.9 SCOPE OF DELIVERY ............................................................................................................... 10

2 OPERATING INSTRUCTIONS ....................................................................................................... 11

2.1 OPERATING LOCATION ............................................................................................................ 11

2.2 DAMAGE CAUSED BY IMPROPER USE ............................................................................................ 11

2.3 WARRANTY / REPAIR .............................................................................................................. 12

3 INSTALLATION ........................................................................................................................ 13

3.1 INSTALLATION OPTIONS .......................................................................................................... 13

3.2 EXTERNAL DEVICE DIMENSIONS ................................................................................................. 18

4 COMMISSIONING ..................................................................................................................... 19

4.1 AVAILABLE INTERFACES ........................................................................................................... 19

4.2 CABLE INSTALLATION ............................................................................................................. 20

4.3 ORDER OF COMMISSIONING STEPS ............................................................................................. 20

4.4 CHECK OF READINESS FOR OPERATION ........................................................................................ 20

5 OPERATION ............................................................................................................................ 21

5.1 FRONT CONTROL KEYS ............................................................................................................ 21

5.2 SOFT KEYBOARD ................................................................................................................... 22

5.3 TOUCHSCREEN ..................................................................................................................... 23

5.4 STATUS INDICATORS .............................................................................................................. 23

6 INTERFACES ............................................................................................................................ 24

6.1 INTERFACE SETUP .................................................................................................................. 24

6.2 SERIAL COM INTERFACE (RS232) ............................................................................................. 24

6.3 USB CONNECTIONS ............................................................................................................... 25

6.4 EXTERNAL KEYBOARD ............................................................................................................. 26

6.5 MOUSE ............................................................................................................................... 27

6.6 24V DC POWER SUPPLY .......................................................................................................... 28

6.7 NETWORK CONNECTION (RJ45) ................................................................................................ 30

6.8 LINE OUT / SOUND ................................................................................................................ 30

6.9 OPTIONAL RADIO NETWORK CARD .............................................................................................. 30

7 DRIVES .................................................................................................................................. 31

7.1 HARD DRIVES / COMPACT FLASH DRIVES (IDE INTERFACE) ................................................................ 31

7.2 EXTERNAL DRIVES .................................................................................................................. 31

8 SOFTWARE & DRIVER INSTALLATION .......................................................................................... 32

8.1 INSTALLING THE OPERATING SYSTEM ........................................................................................... 32

8.2 TOUCHSCREEN DRIVER INSTALLATION .......................................................................................... 33

8.3 SOFT KEYBOARD .................................................................................................................... 33

8.4 IGNITION KEY LOCKING ........................................................................................................... 33

9 TECHNICAL DETAILS ................................................................................................................ 34

9.1 DISPLAY DATA ....................................................................................................................... 34

9.2 COMPUTER DATA ................................................................................................................... 34

9.3 GENERAL DATA ...................................................................................................................... 34

10 SERVICE AND SUPPORT ............................................................................................................. 35

10.1 ADS-TEC SUPPORT .................................................................................................................. 35

10.2 COMPANY ADDRESS ................................................................................................................ 35

Terminals VMT5015

Pos: 1 /Datentechnik/Allgemeine Hinweise/Wi r über uns/Wir über uns @ 0\mod_11587 43732668_681.doc @ 692 @

BOUT US

ads-tec GmbH Raiffeisenstr. 14

70771 Leinfelden-Echterdingen Tel: +49 (0) 711 / 45894-0 Fax: +49 (0) 711 / 45894-990 www.ads-tec.com Germany

ads-tec GmbH provides large enterprises and globally active corporations with cutting edge technology, up-to-date know-how and comprehensive services in the area of automation technology, data processing technology and systems engineering.

ads-tec GmbH implements full automation solutions from planning to commissioning and is specialized in handling and material handling technologies.

The data systems division develops and produces PC based solutions and offers a broad range of industrial PCs, thin clients and embedded systems.

ads-tec is specialized in modifying and optimizing embedded operating systems and develops software tools to complement its hardware platforms.

Pos: 2 /Datentechnik/Allgemeine Hinweise/Rele vante Dokumentationen zu m Gerät/Relevante Dok umentationen für OPC / C PC / OTC / VMT /STC/TT-Serie @ 1\ mod_1204789290941_681.d oc @ 3423 @

1 REMARKS

1.1 RELEVANT DOCUMENTATION FOR THIS DEVICE

The following documents are essential for setting up and operating this device:

SER MANUAL ON SERVICE CD (DOCUMENTATION ON HAND):

Contains information for installation, commissioning and operating the device along with technical data of the device hardware.

ERVICE CD:

Contains drivers and the user manual.

Note:

The "Drivers-xx.pdf" file contains an overview table showing which drivers from the service CD are to be used for which device. You must open the "Which driver for which

Pos: 3 /Datentechnik/Allgemeine Hinweise/Erlä uterung zu den verwendete n Symbolen/Erläuter ung zu den verwendeten Sy mbolen @ 0\mod_1158752779 484_681.doc @ 690 @ a

1.2 USED SYMBOL EXPLANATION

device" menu item in order to open this file.

Warning:

The "Warning" symbol refers to activities which might cause personal injury or damage to the hardware or software!

Terminals VMT5015

Note:

The "Note" symbol familiarises you with conditions to be observed in order to ensure flawless operation. Additionally, hints and advice are given for a more efficient use of the

Pos: 4 /Datentechnik/Allgemeine Hinweise/Daten, Abbildungen, Änderun genDaten,Abbildung en,Änderungen (2009- 02-24 14:01:39) @ 0\mod _1158754051494_681.doc @ 694 @

device and for software optimisation.

1.3 DATA, FIGURES AND MODIFICATIONS

All texts, data and figures are non-binding. We reserve the right of modification in accordance with technological progress. At that point in time when the products leave our premises, they comply with all currently applicable legal requirements and regulations. The operator/operating company is independently responsible for compliance with and observance of any subsequently introduced technical innovations and new legal

Pos: 5 /Datentechnik/Allgemeine Hinweise/War enzeichen/Warenzeic hen @ 0\mod_115875515136 3_681.doc @ 696 @

requirements, as well as for all usual obligations of the operator/operating company.

Terminals VMT5015

1.4 TRADE MARKS

We would like to remind you that all software and hardware designations as well as trade names of companies used in this documentation are subject to the general, international trade mark, brand or patent protection laws.

WINDOWS

All other nationally and internationally recognised trade marks and product names are

Pos: 6 /Datentechnik/Allgemeine Hinweise/Urheber recht/Urheberrec ht @ 0\mod_1158756954232_ 681.doc @ 698 @

1.5 COPYRIGHTS

Pos: 7 /Datentechnik/Allgemeine Hinweise/Umwe ltbedingungen/Umwel tbedingungen für CPC- Serie / PLC 300 / OTC 5006 / VMT 5012/15 @ 1\mod_1204642257087_68 1.doc @ 3394 @

hereby likewise recognised.

This manual, including all contained figures, is protected by copyright law. Any use for third parties non-compliant with the copyright provisions is prohibited. Any reproduction, translation as well as electronic and photographic archiving and modification shall only be permitted after explicit written authorisation by ads-tec GmbH.

Any party in violation of this provision shall be obliged to damage compensation.

, WINDOWS® CE and WINDOWS® CE.net™ are trade marks registered by

Microsoft Corp.

and ICA® are trade marks registered by Citrix Systems Inc.

Citrix

and Pentium® are trade marks registered by Intel Corp.

Intel

, PS/2® and VGA® are trade marks registered by IBM Corp.

IBM

CompactFlash™ and CF™ are trademarks of SanDisk Corp.

1.6 ENVIRONMENTAL CONDITIONS

The device may be operated under the following conditions. Failure to observe these specifications will terminate any warranty for this device. Ads-tec cannot be held liable for any damages arising due to improper use and handling.

• Temperature for devices including a HDD /Compact Flash

In operation -20 … 45° C For storage -20 … 60° C

• Temperature for devices including a heater(only CF-Devices)

In operation -25 … 45° C For storage -25 … 60° C

• Humidity:

In operation 10 … 85% without condensate For storage 10 … 85% without condensate

• Vibrations:

In operation 1 G, 10 … 500 Hz

• Shock resistance:

In operation 5 G, with a half-wave of 30 ms duration

Pos: 8 /Datentechnik/Allgemeine Hinweise/Normen/ Normen @ 1\mod_1219145812 377_681.doc @ 3946 @

(EN 60068-2-27)

Terminals VMT5015

(EN 60068-2-6)

Terminals VMT5015

1.7 STANDARDS

This unit is compliant with the provisions and safety objectives of the following EU Directives:

• This unit is compliant with the CE mark testing specification limits as defined in the

• This unit is compliant to the DIN EN 60950 (VDE0805, IEC950) testing

• This unit is compliant to the DIN EN 60068-2-6 (sinusoidal vibration) testing

• This unit is compliant to the DIN EN 60068-2-27 (shock and bump) testing

Note:

A corresponding declaration of conformity is available for competent authorities, care of the Manufacturer. Said declaration can be viewed at all times upon request.

For full compliance to the legal requirements in force on electromagnetic compatibility, all components and cables used for unit connection must also be compliant with said regulations. It is therefore necessary to employ BUS and LAN cables featuring screened plug connectors, to be strictly installed as per the instructions contained in the User Manual.

European test standards EN 61000-6-4 und EN 61000-6-2

specification limits on “Safety of Information Technology Equipment”

specification limits

Pos: 9 /Datentechnik/Allgemeine Hinweise/Ausst attungsvarianten/ Ausstattungsvari anten für IPC/5300/ 5500 /VMT-Serie @ 0\mod_11 58760700338_681.doc @ 712 @

1.8 EQUIPMENT VERSIONS

The system is available in two equipment versions:

Platform for use with compact flash memories:

Platform without any rotating mass storage media (hard disks, etc.) including embedded operating systems (Windows CE.net / XP embedded) for stationary use in connection with standard Ethernet or radio network cards on portable commissioning and/or forklift equipment.

Platform including hard disks:

Including hard disks for stationary use, e.g. in manufacturing using standard operating systems.

Pos: 10 /Datentechnik/Allgemeine Hinweise/Liefer umfang/Lieferu mfang für VMT- Serie @ 0\ mod_1158824011759_681. doc @ 718 @

1.9 SCOPE OF DELIVERY

Please check that all of the following components are contained in the packaging:

Optional scope of delivery

Pos: 11 /Datentechnik/Betriebshinweise/Betri ebsort/Betriebsor t für VMT-Serie @ 0\mod_1 158826710817_681.doc @ 726 @

Terminals VMT5015

• 1 device

• 3 pin Feed-through connector from Phoenix Contact, COMBICON MC

1.5/3-STF-3.81 type (already connected with the device socket)

• Service CD

• Operating system

• Installation kit

• 2.4 GHz WLAN antennas, enclosed for b/g

Terminals VMT5015

2 OPERATING INSTRUCTIONS

This device contains electrical voltages and extremely sensitive components. The manufacturer, or a service partner authorised by the manufacturer, should be consulted if you plan to make any modifications. For this type of work, the device must be switched off at the mains and the power lead must be disconnected. Suitable measures for avoiding electrostatic discharge towards parts of the components when touching the equipment must be taken. If the device is opened by an unauthorised person, hazards for the user might arise and any warranty claim will cease.

General instructions:

• All users must read this manual and have access to it at all times.

• Installation, commissioning and operation may only be carried out by trained and

qualified staff.

• The security instructions and the manual itself must be observed by all persons

who work with this device.

• At the location of use, the valid guidelines and regulations for accident prevention

must be observed.

• The manual contains the most important instructions on how to use this device in

a safe way.

• Appropriate storage, proper transport, installation and commissioning, as well as

careful operation are prerequisites for ensuring safe and proper operation of the device.

Warning:

Any leads (e.g. power leads, interface cables) may only be connected if the device is switched off in order to avoid damaging the device.

2.1 OPERATING LOCATION

The VMT control system is designed for use with support arm systems or on mobile base equipment (commissioning trolleys, fork lift equipment, and similar). You have to take care that the environmental conditions indicated in the technical specification are met. Using the device in non-specified environments, for example on board ship or in areas that might contain explosive gases, or in extreme heights, is prohibited.

Warning:

The device may only be switched on after acclimatising to the ambient temperature in order to avoid condensate accumulation. The same applies if the device has previously been exposed to extreme temperature variations.

To avoid overheating in operation: The device must never be exposed to direct radiation by sunlight or any other light or heat source.

Pos: 12 /Datentechnik/Betriebshinweise/Sc häden durch unsachgemäßen Gebrauch/Schäden durc h unsachgemäßen Gebrauch @ 0\mod_1158827867958_68 1.doc @ 728 @

2.2 DAMAGE CAUSED BY IMPROPER USE

This device must immediately be shut down and protected from any accidental commissioning if the operating system shows any obvious damage caused by, for example,

Pos: 13 /Datentechnik/Betriebshinweise/Ge währleistung / Reparatur /Gewährleistung / Reparatur @ 0\mod_11588280 54427_681.doc @ 730 @

improper operating or storage conditions, or by improper use or handling.

+ 24 hidden pages

ADS-TEC VMT5015 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1 REMARKS

1.1 RELEVANT DOCUMENTATION FOR THIS DEVICE

1.2 USED SYMBOL EXPLANATION

1.3 DATA, FIGURES AND MODIFICATIONS

1.4 TRADE MARKS

1.5 COPYRIGHTS

1.6 ENVIRONMENTAL CONDITIONS

1.7 STANDARDS

1.8 EQUIPMENT VERSIONS

1.9 SCOPE OF DELIVERY

2 OPERATING INSTRUCTIONS

2.1 OPERATING LOCATION

2.2 DAMAGE CAUSED BY IMPROPER USE