ADS-TEC OPC8013, OPC8015, OPC8022 User Manual

Instruction manual

Industrial PCs

OPC8013/OPC8015/OPC8022

Version 1.1 Translation of the original instruction manual

OPC8013/OPC8015/OPC8022 1

Table of Contents

1 Notes.................................................................................................................................. 3

1.1 Relevant device documentation ........................................................................................................ 3

1.2 Explanation of the warning notices ................................................................................................... 3

1.3 Data, figures and modifications ......................................................................................................... 3

1.4 Trademarks ....................................................................................................................................... 4

1.5 Copyright ........................................................................................................................................... 4

1.6 Environmental conditions .................................................................................................................. 5

1.7 Standards .......................................................................................................................................... 6

1.8 Scope of delivery ............................................................................................................................... 6

1.9 Device features .................................................................................................................................. 7

2 Operating and safety instructions ................................................................................... 9

2.1 Operating location ............................................................................................................................. 9

2.2 Damage due to improper use ......................................................................................................... 10

2.3 Warranty / repairs ............................................................................................................................ 10

2.4 Treatment and disposal of lithium batteries..................................................................................... 10

2.5 Safety instructions ........................................................................................................................... 11

3 Installation ....................................................................................................................... 12

3.1 Installation option ............................................................................................................................ 12

3.2 External device dimensions OPC8013 ........................................................................................... 13

3.3 Installation layout OPC8013 ........................................................................................................... 14

3.4 External device dimensions OPC8015 ........................................................................................... 15

3.5 Installation layout OPC8015 ........................................................................................................... 16

3.6 External device dimensions OPC8022 ........................................................................................... 17

3.7 Installation layout OPC8022 ........................................................................................................... 18

3.8 Safety notices prior to beginning installation .................................................................................. 19

3.9 Order of installation ......................................................................................................................... 20

4 Commissioning ............................................................................................................... 22

4.1 Available interfaces ......................................................................................................................... 22

4.2 Cable installation ............................................................................................................................. 23

4.3 Order of steps during commissioning .............................................................................................. 23

4.4 Check for operational readiness ...................................................................................................... 23

5 Operation ......................................................................................................................... 24

5.1 Front panel operation keys (basic function) .................................................................................... 24

5.2 Soft keyboard .................................................................................................................................. 25

5.3 Touch screen ................................................................................................................................... 26

5.4 Status displays ................................................................................................................................ 26

OPC8013/OPC8015/OPC8022 2

6 Interfaces ......................................................................................................................... 27

6.1 Interface setup ................................................................................................................................. 27

6.2 Voltage supply 24V DC ................................................................................................................... 27

6.3 USB connections ............................................................................................................................. 27

6.4 Network connection (RJ45) ............................................................................................................. 28

6.5 Serial interface COM (RS232) ......................................................................................................... 29

7 Drives ............................................................................................................................... 30

7.1 Hard disk / Flash SSD ..................................................................................................................... 30

7.2 External drives ................................................................................................................................. 30

8 Software & driver installation ......................................................................................... 31

8.1 Configuration Center ....................................................................................................................... 32

8.1.1 COM input configuration .............................................................................................................. 33

8.1.2 Write Filter.................................................................................................................................... 33

8.1.3 Soft keyboard ............................................................................................................................... 34

8.1.4 Screen Mob.................................................................................................................................. 35

8.1.5 USB lock ...................................................................................................................................... 36

8.1.6 Touch calibration recovery ........................................................................................................... 37

9 Technical details ............................................................................................................. 38

10 Service & support ......................................................................................................... 40

10.1 ads-tec support ............................................................................................................................. 40

10.2 Company address ......................................................................................................................... 40

11 Component replacement .............................................................................................. 41

11.1 Opening the service slot ............................................................................................................... 41

11.2 Replacing the HDD (hard disk) ..................................................................................................... 43

11.3 Replacing the fan .......................................................................................................................... 44

11.4 Replacing the working memory (RAM) ......................................................................................... 45

11.5 Replacing the lithium battery ........................................................................................................ 46

12 Declaration of CE-Conformity ...................................................................................... 48

OPC8013/OPC8015/OPC8022 3

DANGER

Indicates an imminent danger. If not avoided, death or severe injury will result.

WARNING

Indicates a possible danger. If not avoided, death or severe injury could result.

CAUTION

Indicates a possible danger. If not avoided, light or minor injuries could result.

ATTENTION

Indicates a possibly damaging situation. If not avoided, the system or something in its surroundings could be damaged.

Information:

The symbol "Information" indicates notes, terms and/or conditions that strictly need to be observed to ensure optimised and/or zero-defect operation. Tips and suggestions for the efficient use of the device and software optimisation are also provided.

1 Notes

1.1 Relevant device documentation

The following documents are decisive to unit setup and operation: User manual (this documentation): Contains information for installation, commissioning and operation of the device along with technical

data of the device hardware. Website You can download drivers, software, user manuals, leaflets and flyers from the Download section of our

website www.ads-tec.de.

1.2 Explanation of the warning notices

1.3 Data, figures and modifications

All texts, data and figures are non-binding. We reserve the right to make changes that serve technical development. At the point in time that the products leave our premises, they comply with all currently applicable legal requirements and regulations. The operator/operating company is independently responsible for compliance with and observance of any subsequently introduced technical innovations or new legal requirements, as well as for all usual obligations of the operator/operating company.

OPC8013/OPC8015/OPC8022 4

1.4 Trademarks

It is noted that any software and/or hardware trademarks and any company brand names as mentioned in this documentation are all subject to the general trademark, brand name and patent protection rights.

Windows®, Windows® CE are registered trademarks of Microsoft Corp.

Intel®, Pentium®, Atom™, Core™2 are registered trademarks of Intel Corp.

RITTAL® is a registered trademark of the Rittal Werk Rudolf Loh GmbH & Co. KG.

Any other additional trademarks and/or brand names herein, be they domestic or international, are hereby duly acknowledged.

1.5 Copyright

This manual including all images contained herein is subject to copyright. Third-party use of this manual that infringes on the copyright terms is forbidden. Reproduction, translation, or electronic and photographic archiving or alteration requires the express written consent of ads-tec GmbH.

Infringements or violations shall result in an obligation to provide compensation for damages.

OPC8013/OPC8015/OPC8022 5

 Temperature for OPC8008

in operation -20 to +55°C* (*only with Flash SSD) for storage -30 to +75°C

 Temperature for OPC8013/8015 devices

in operation +5 to +45°C in operation -20 to +60°C* (*only with Flash SSD, automotive hard disk or 2.5" Industrial SSD)

for storage -30 to +65°C for storage -30 to +75°C* (*only with Flash SSD, automotive hard disk or 2.5" Industrial SSD)

 Temperature for OPC8022 device

in operation +5 to +45°C for storage -20 to +60°C

 Humidity

in operation 10 to 85% without condensate for storage 10 to 85% without condensate

 Vibration

in operation 1 G, 10 to 500 Hz (DIN EN 60068-2-6)

 Shock resistance

in operation 5 G, with a 30 ms half-cycle (DIN EN 60068-2-27)

1.6 Environmental conditions

The device can be put into operation and used under the following conditions. Failure to observe any one of these conditions will invalidate the warranty. ads-tec cannot be held liable for any damages arising from improper use and handling.

OPC8013/OPC8015/OPC8022 6

Standards

 This device is compliant with the CE mark test requirements as defined in the

European test standards EN 55022 and EN 50082-2

 This device is compliant with the DIN EN 60950 (VDE0805, IEC950) testing

specifications on “Information technology equipment – Safety"

 This device is compliant with the DIN EN 60068-2-6 testing specifications

(sinusoidal vibration)

 The device is compliant with the DIN EN 60068-2-27 testing specifications

(shock resistance test)

Information:

A corresponding declaration of conformity is available for competent authorities at the manufacturer and can be viewed upon request.

For full compliance with the EMC legislation, all components and cables used for device connection must also be compliant with these requirements. It is therefore necessary to employ BUS and LAN cables with shielded connectors and these must be installed as per the instructions contained in the user manual.

 1 x device  1 x 3-pole lead-through connector from Phoenix Contact; 3-pole screwable 3.81

OPC7 (already plugged into device socket)

 QuickStartGuide

Optional scope of delivery:

 Operating system

1.7 Standards

This device is compliant with the provisions and safety objectives of the following EU directives:

1.8 Scope of delivery

Please check that all of the following components are contained in the packaging:

OPC8013/OPC8015/OPC8022 7

No.

Description

Display with touch screen

Front keys with lighting

Status indicator

1.9 Device features

Proven many times over in rough environments, Panel PCs from ads-tec create clarity and precision in a new form. Optimised in every detail - with multi-touch operation and rear service access for simple and safe replacement of all components. In wide-screen format in four different sizes, reduced to the essential without compromise, powerful and with long-term availability.

Front side

Fig. 1:

OPC8013/OPC8015/OPC8022 8

No.

Description

Service slot

Tensioners for installation purposes

Rear side

Fig. 2:

OPC8013/OPC8015/OPC8022 9

General information

 All users must read this manual and have access to it at all times.  Installation, commissioning and operation may only be performed by qualified

and trained personnel.

 The safety notices and the manual itself must be observed by all persons who

work with this device.

 At the installation site the valid guidelines and regulations for accident

prevention must be observed.

 The manual contains the most important instructions on how to use this device

in a safe way.

 Appropriate storage, proper transport, installation and commissioning, as well as

careful operation are prerequisites for ensuring safe and proper operation of the device.

 The device can be cleaned by using a soft cloth and a commercially available

glass cleaning agent (e.g. Sidolin) with low alcohol content.

ATTENTION

To prevent damage to the device, all cable lines (power supply, interface cables) must be only be connected while the device is switched off.

ATTENTION

The device may only be switched on after acclimatising to the ambient temperature in order to avoid condensate accumulation. This also applies if the device is exposed to extreme temperature fluctuations.

To avoid overheating in operation: The device must not be exposed to direct radiation by sunlight or any other light source.

ATTENTION

If the device is installed in a panel, casing or similar, it must be ensured that no heat accumulation occurs. The maximum permissible ambient temperature must not be exceeded.

2 Operating and safety instructions

The device operates under electrical voltage and contains highly sensitive components. Intervention by the user is required only for connecting the power supply lines. Should any further modifications be required, it is necessary to consult either with the manufacturer directly or with service personnel authorised by the manufacturer. The device must be de-energised during work. Appropriate measures must be taken to prevent electrostatic discharges on components. If the device is opened up by an unauthorised person, the user may be subject to hazards and the warranty is invalidated.

2.1 Operating location

The control system is designed for use inside a switching cabinet. Make certain that the specified environmental conditions are maintained at all times. Use in non-specified environments, i.e., on board ships, in explosive atmospheres or at extreme elevations, is prohibited.

OPC8013/OPC8015/OPC8022 10

ATTENTION

The more the battery is exposed to higher temperatures, the faster it ages.

WARNING

Danger of explosion if using incorrect battery types.

WARNING

Lithium batteries should not be exposed to fire, soldered, recharged, opened, short-circuited, reversed or heated above 100 °C and they should be disposed of properly as well as protected against sunlight, moisture and condensation.

2.2 Damage due to improper use

Should the control system have evident signs of damages caused, e.g., by improper operation or storage conditions or due to improper use or handling, the device must be shut down immediately. Ensure that it is secured against being started up accidentally.

2.3 Warranty / repairs

During the device warranty period, any repairs must only be performed by the manufacturer or by service personnel that has been authorised by the manufacturer.

2.4 Treatment and disposal of lithium batteries

This device contains a lithium battery for supplying the system clock with power as long as the supply voltage is not connected. The battery has a life cycle of 3 - 5 years depending on which load is applied.

Lithium batteries may only be replaced by the same type, or by a type recommended by the manufacturer.

The used lithium battery should be disposed of in accordance with local legal regulations.

OPC8013/OPC8015/OPC8022 11

WARNING

All installation work performed on the device must be performed only under safe, secure and deenergised conditions.

ATTENTION

Always adhere to the safety measures applicable when handling components at risk of being damaged by electrostatic discharges.

(DIN EN 61340-5-1 / DIN EN 61340-5-2)

2.5 Safety instructions

OPC8013/OPC8015/OPC8022 12

ATTENTION

To avoid overheating in operation: The device must not be exposed to direct radiation by sunlight or any other light source.

If the device is installed in a panel, casing or similar, it must be ensured that no heat accumulation occurs. The maximum permissible ambient temperature must not be exceeded.

Devices with data drives must only be installed vertically. Any deviation must be arranged with ads-tec GmbH.

IP 65 on the front is only achieved with proper installation.

ATTENTION

When selecting the enclosure for integration, the total power dissipation of the system including installed PCBs must be taken into account. The housing must be dimensioned so that the max. permissible ambient temperature is not exceeded.

3 Installation

3.1 Installation option

This device is designed for integration. For installation and operation reasons (connector access), the installation location must be accessible from the rear. The wall thickness of the installation location must be between 2 and 13 mm. We recommend at least 3 mm for proper installation with IP65 on the front. Installation can be performed with a 2mm Allen key.

OPC8013/OPC8015/OPC8022 13

3.2 External device dimensions OPC8013

Fig. 3:

OPC8013/OPC8015/OPC8022 14

3.3 Installation layout OPC8013

OPC8013/OPC8015/OPC8022 15

3.4 External device dimensions OPC8015

Fig. 4:

+ 36 hidden pages

ADS-TEC OPC8013, OPC8015, OPC8022 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual