ADS-TEC OPC5117 User Manual

Version 2.4

User Manual

Industrial PCs OPC5117

Product Portfolio

Industrial PCs OPC5117

Raiffeisenstr.14

D-70771 Leinfelden-Echterdingen

Germany

Industrial PCs OPC5117

INDEX

1 REMARKS ............................................................................................................................... 5

1.1 RELEVANT DEVICE DOCUMENTATION ................................................................................................. 5

1.2 EXPLANATION OF THE SYMBOLS USED IN THIS DOCUMENT ....................................................................... 5

1.3 DATA, ILLUSTRATIONS, MODIFICATIONS ............................................................................................. 5

1.4 TRADEMARKS .............................................................................................................................. 5

1.5 COPYRIGHT ................................................................................................................................ 6

1.6 AMBIENT CONDITIONS ................................................................................................................... 6

1.7 STANDARDS ................................................................................................................................ 7

1.8 MODELS .................................................................................................................................... 7

1.9 SCOPE OF DELIVERY ...................................................................................................................... 7

2 SAFETY INFORMATION .......................................................................................................... 8

2.1 PLACE OF INSTALLATION ................................................................................................................ 8

2.2 DAMAGE DUE TO IMPROPER USAGE .................................................................................................... 9

2.3 WARRANTY AND REPAIRS ............................................................................................................... 9

2.4 COMPLAINTS SUBSEQUENT TO DELIVERY ............................................................................................. 9

2.5 HANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES ....................................................................... 9

3 MOUNTING ........................................................................................................................... 10

3.1 MOUNTING OPTIONS ................................................................................................................... 10

3.2 DEVICE MOUNTING ILLUSTRATION .................................................................................................. 10

3.3 MOUNTING PROCEDURE ............................................................................................................... 11

4 ADD-ON CARD INSTALLATION ............................................................................................ 12

4.1 PRE-INSTALLATION NOTES ............................................................................................................ 12

4.2 NOTES ON CONFIGURING THE ADD-ON CARD (PNP) ............................................................................. 12

4.3 INSTALLING ADD-ON CARDS .......................................................................................................... 12

5 STARTUP .............................................................................................................................. 13

5.1 AVAILABLE INTERFACES ................................................................................................................ 13

5.2 CABLE INSTALLATION .................................................................................................................. 14

5.3 STARTUP PROCEDURE .................................................................................................................. 14

5.4 OPERATIONAL READINESS CHECK .................................................................................................... 14

6 OPERATION .......................................................................................................................... 15

6.1 FRONT CONTROL BUTTONS ........................................................................................................... 15

6.2 SOFTWARE KEYBOARD ................................................................................................................. 16

6.3 EXTERNAL KEYBOARD .................................................................................................................. 17

6.4 MOUSE .................................................................................................................................... 17

6.5 TOUCH SCREEN .......................................................................................................................... 17

7 STATUS INDICATORS ........................................................................................................... 18

7.1 SYS LED (TWO COLORS) ............................................................................................................. 18

8 INTERFACES ......................................................................................................................... 19

8.1 INTERFACE CONFIGURATION .......................................................................................................... 19

8.2 INTERFACE ASSIGNMENT .............................................................................................................. 19

8.3 24 V DC POWER SUPPLY .............................................................................................................. 19

8.4 115/230 V AC POWER SUPPLY ..................................................................................................... 20

8.5 USB CONNECTIONS .................................................................................................................... 20

8.6 NETWORK CONNECTION (RJ45) .................................................................................................... 21

8.7 SERIAL COM INTERFACE (RS232) ................................................................................................. 21

8.8 LPT1 PARALLEL INTERFACE ........................................................................................................... 22

8.9 OPTIONAL USB CONNECTION ON THE FACEPLATE ............................................................................... 22

8.10 EXTERNAL DRIVES ................................................................................................................... 22

8.11 DVI INTERFACE ...................................................................................................................... 23

8.12 HARD DRIVE / COMPACTFLASH (IDE INTERFACE) ............................................................................ 24

8.13 PS/2 CONNECTION .................................................................................................................. 24

9 SOFTWARE/DRIVER INSTALLATION ................................................................................... 25

9.1 INSTALLING THE OPERATING SYSTEM ............................................................................................... 25

9.2 TOUCH SCREEN DRIVER INSTALLATION ............................................................................................. 26

9.3 SOFTWARE KEYBOARD ................................................................................................................. 26

10 TECHNICAL DETAILS ......................................................................................................... 27

10.1 DISPLAY DATEN ...................................................................................................................... 27

10.2 COMPUTER TECHNICAL DATA ...................................................................................................... 27

10.3 GENERAL DATA ....................................................................................................................... 27

11 SERVICE AND SUPPORT .................................................................................................... 28

11.1 ADS-TEC SUPPORT ................................................................................................................... 28

11.2 COMPANY ADDRESS: ................................................................................................................ 28

Industrial PCs OPC5117

1 REMARKS

1.1 RELEVANT DEVICE DOCUMENTATION

Consult the following documentation for information pertaining to device setup and operation:

User manual on the service CD (this documentation): Contains information pertaining to device mounting, startup and operation as well as the technical data for the device hardware.

Service CD: Contains drivers, user manual and installation instructions for installing drivers, calibration and using the touch screen.

1.2 EXPLANATION OF THE SYMBOLS USED IN THIS DOCUMENT

Warning:

The "Caution" symbol indicates actions that could cause damage to hardware, software or persons!

Note:

This symbol conveys conditions that must be adhered to in order to ensure error-free operation. It also indicates tips and suggestions for using the device efficiently and optimizing software use.

1.3 DATA, ILLUSTRATIONS, MODIFICATIONS

All text, data and illustrations in this document are of non-binding nature. We reserve the right to make any modifications required for technical progress.

1.4 TRADEMARKS

All software and hardware names as well as all company brand names included in this documentation are subject to trademark and patent laws.

WINDOWS

, WINDOWS® CE and WINDOWS® CE.net™ are registered trademarks of Microsoft Corp.

We hereby recognize all other locally and internationally known trademarks and product names.

WINDOWS NT™ is a trademark of Microsoft Corp.

and ICA® are registered trademarks of Citrix Systems Inc.

Citrix

Intel

and Pentium® are registered trademarks of Intel Corp.

VIA C3™ is a trademark of VIA Technologies, Inc.

, PS/2® and VGA® are registered trademarks of IBM Corp.

IBM

SanDisk

CompactFlash™ and CF™ are trademarks of SanDisk Corp.

is a registered trademark of SanDisk Corp.

1.5 COPYRIGHT

This manual and any illustrations contained therein are copyrighted. Any use of this manual which deviates from the copyright stipulations is prohibited. Reproduction, translation and/or electronic and photographic archiving and modification require written permission from ads-tec GmbH.

1.6 AMBIENT CONDITIONS

The device can be operated in the following ambient conditions. The device warranty will be rendered invalid upon noncompliance with these specifications. ads-tec shall not be held responsible for damages resulting from improper handling.

• Temperature for devices with fans

during use 5 … 45 C in storage -20 … 45 C

• Temperature for devices without fans

during use 5 … 40 C in storage -20 … 40 C

• Humidity

during use 10 … 85% without condensation in storage 10 … 85% without condensation

• Vibration

during use 1 G, 10 … 500 Hz

• Bump

during use 5 G, at alternation of 30 ms (DIN EN 60068-2-29)

Industrial PCs OPC5117

The violation of these rights will be prosecuted.

(due to temperature peak value memory inside)

(DIN EN 60068-2-6)

Industrial PCs OPC5117

1.7 STANDARDS

The device meets the requirements and objectives of the following EC directives:

• The device complies with the test specifications for the CE label according to the

European test standards EN 55022 and EN 50082-2.

• The device complies with the test specifications DIN EN 60950 (VDE 0805, IEC

950) "Safety of Information Technology Equipment".

• The device complies with the DIN EN 60068-2-6 (sinusoidal vibration) test

specifications.

• The device complies with the DIN EN 60068-2-29 (bump) test specifications.

Note:

The manufacturer keeps a corresponding declaration of conformity for the responsible authorities and can present that document upon request.

In order for the device to comply with the legal requirements pertaining to electromagnetic compatibility, all connected components and cable connections have to meet these requirements as well. Therefore shielded bus and LAN cables with shielded plugs should be used and installed as specified in this manual.

1.8 MODELS

Two models of the system are provided:

Platform with CompactFlash:

This platform has no rotating mass storage media (e.g. hard drives) and incorporates an embedded operating system (Windows CE.net / XP embedded) for stationary use.

Platform with hard drive:

This model includes a hard drive for stationary use in production environments and incorporates standard operating systems.

1.9 SCOPE OF DELIVERY

Shipment includes the following:

•

Optional components

• Operating system

1 device For 230 V AC device: power cable with IEC connector

For 24 V DC device: 3 pin Phoenix Contact COMBICON MC 2,5/3-GF-5,08 feed-

through header (already mounted in the device socket) Mounting kit for installation Service CD

2 SAFETY INFORMATION

The device is electrically charged and contains highly sensitive components. Permissible modification by the user is limited to installing add-on cards. The manufacturer or a service provider authorized by the manufacturer should be consulted if any other modifications are to be carried out. Whenever such modifications are carried out the device must first be switched off and the power cable must be disconnected. The appropriate measures should be implemented to avoid electrostatic shock to the components upon contact. Opening of the device by a non-authorized person could result in hazards to the user and renders any warranty claims invalid.

Industrial PCs OPC5117

General notice:

• The manual should be read by all users and should be kept readily accessible at all

times.

• Mounting, startup and operation should only be carried out by trained personnel.

• All persons using the device should observe the safety information and the

manual.

• The rules and regulations pertaining to accident prevention should be observed in

the place of device installation.

• The manual contains the most important information required for safe operation of

the device.

• Proper storage, transport, installation and startup are required to ensure correct

and safe device operation.

Warning:

The device should be switched off prior to connecting any cables (power supply, peripherals) to prevent damage to the device.

2.1 PLACE OF INSTALLATION

The control system is intended for installation in the control cabinet. The specified ambient conditions should always be adhered to. Use in non-specified environments (e.g. on boats, in explosive hazard areas or at extreme altitudes) is prohibited.

Warning:

In order to avoid formation of condensation, the device should only be switched on once it has acclimated to the room temperature. The same applies if the device has been exposed to extreme variations in temperature.

Preventing overheating during operation: The device should not be exposed to direct sunlight or other sources of light.

Measures to prevent heat accumulation should be implemented if the device is installed in a console, casing or similar enclosing structure. The maximum permissible ambient temperature should not be exceeded.

Industrial PCs OPC5117

2.2 DAMAGE DUE TO IMPROPER USAGE

If the control system shows obvious damage caused by incorrect operational and/or storage conditions or improper handling, then the device is to be shut down immediately and protected against unintentional startup.

2.3 WARRANTY AND REPAIRS

During the warranty period, repairs may only be carried out by the manufacturer or persons authorized by the manufacturer.

2.4 COMPLAINTS SUBSEQUENT TO DELIVERY

If the control system shows obvious damage subsequent to transport, then the device is to be protected against unintentional startup immediately. The supplier and forwarder are to be notified immediately of any obvious damages in transit. Notification of any hidden damages in transit is to be filed with the supplier within 5 days after delivery. Damages of this type can no longer be recognized once this period has expired.

2.5 HANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES

Warning:

Danger of explosion and the release of toxic substances

Lithium batteries should not be exposed to fire, soldered, recharged, opened, shortcircuited, reversed or heated above 100 °C and they should be disposed of properly as well as protected against sunlight, moisture and condensation.

The lithium battery can only be replaced by the same type or a type recommended by the manufacturer.

The used

lithium battery should be disposed of in accordance with local legal regulations.

+ 19 hidden pages

ADS-TEC OPC5117 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1 REMARKS

1.1 RELEVANT DEVICE DOCUMENTATION

1.2 EXPLANATION OF THE SYMBOLS USED IN THIS DOCUMENT

1.3 DATA, ILLUSTRATIONS, MODIFICATIONS

1.4 TRADEMARKS

1.5 COPYRIGHT

1.6 AMBIENT CONDITIONS

1.7 STANDARDS

1.8 MODELS

1.9 SCOPE OF DELIVERY

2 SAFETY INFORMATION

2.1 PLACE OF INSTALLATION

2.2 DAMAGE DUE TO IMPROPER USAGE

2.3 WARRANTY AND REPAIRS

2.4 COMPLAINTS SUBSEQUENT TO DELIVERY

2.5 HANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES