ADS-TEC ITC1013 User Manual

Version 1.0

User Manual

Tablet PCs ITC1013

Product Portfolio

Tablet PCs ITC1013

Raiffeisenstr.14

D-70771 Leinfelden-Echterdingen

Germany

ablet PCs ITC1013

INDEX

ABOUT US .......................................................................................................................................... 5

1 REMARKS ................................................................................................................................. 6

1.1 RELEVANT DATA COMMUNICATION WITH THE DEVICE ........................................................................... 6

1.2 DESCRIPTION OF THE WARNING SYMBOLS USED IN THIS GUIDE ............................................................... 6

1.3 DATA, IMAGES, AMENDMENTS AND VARIATIONS ................................................................................. 6

1.4 TRADEMARKS ............................................................................................................................ 6

1.5 COPYRIGHT .............................................................................................................................. 7

1.6 CERTIFICATIONS / TESTS ............................................................................................................. 7

1.7 SCOPE OF DELIVERY .................................................................................................................... 7

2 OPERATING INSTRUCTIONS ......................................................................................................... 8

2.1 OPERATING LOCATION ................................................................................................................. 8

2.2 DAMAGES DUE TO IMPROPER USE ................................................................................................... 8

2.3 WARRANTY / REPAIRS ................................................................................................................. 9

2.4 HANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES ..................................................................... 9

2.5 SAFETY INSTRUCTIONS ................................................................................................................ 9

2.6 EXTERNAL DEVICE DIMENSIONS .................................................................................................... 10

3 COMMISSIONING ..................................................................................................................... 11

3.1 AVAILABLE INTERFACES .............................................................................................................. 11

3.2 READINESS FOR OPERATION CHECKS ............................................................................................. 12

3.3 TOUCHSCREEN ........................................................................................................................ 12

4 FRONT PANEL FUNCTIONS .......................................................................................................... 13

4.1 STATUS INDICATORS ................................................................................................................. 13

4.2 FRONT CONTROL KEYS ............................................................................................................... 15

5 INTERFACES ............................................................................................................................ 17

5.1 20V DC POWER SUPPLY ............................................................................................................. 17

5.2 14.4V DC BATTERY OPERATING MODE .......................................................................................... 17

5.3 USB CONNECTIONS .................................................................................................................. 19

5.4 ODU-INTERFACE (OPTIONAL) ..................................................................................................... 20

5.5 NETWORK CONNECTION (RJ45) .................................................................................................. 22

5.6 MICROPHONE IN FRONT PANEL .................................................................................................... 22

5.7 SMART-CARD READER (OPTIONAL) ............................................................................................... 23

6 SOFTWARE & DRIVER INSTALLATION ........................................................................................... 24

6.1 CONFIGURATION CENTER ........................................................................................................... 24

6.2 POWER DISPLAY ....................................................................................................................... 25

6.3 USB LOCK .............................................................................................................................. 25

6.4 POWER BUTTON CONFIGURATION ................................................................................................. 25

6.5 ADS-TEC RFID SAMPLE APPLICATION ............................................................................................. 26

6.6 SOFT KEYBOARD ...................................................................................................................... 26

6.7 SCREEN MOB SETTINGS ............................................................................................................. 27

6.8 TT13 WIRELESS KONFIGURATION ................................................................................................ 28

6.9 TT13 TOUCH ROTATION ........................................................................................................... 30

6.10 ITC1013 ADSXTERN TEST ......................................................................................................... 31

6.11 MANUAL REINSTALLATION .......................................................................................................... 31

6.12 INSTALLATION OF THE TT13 SOFTWARE PACKAGE .......................................................................... 32

6.13 WLAN .................................................................................................................................. 32

6.14 BLUETOOTH ........................................................................................................................... 35

6.15 UMTS (OPTIONAL) .................................................................................................................. 36

6.16 CAMERA (OPTIONAL) ................................................................................................................ 38

6.17 SOFT KEYBOARD ...................................................................................................................... 41

7 ACCESSORIES ......................................................................................................................... 43

7.1 DVD DRIVE / EXTERNAL TYPE (OPTIONAL ....................................................................................... 43

7.2 LASER PRODUCT SAFETY ............................................................................................................ 44

7.3 TRANSPORT CASE .................................................................................................................... 45

7.4 BATTERY CHARGING STATION C4/TT13 ....................................................................................... 46

7.5 SUBSTITUTION POWER SUPPLY ................................................................................................... 50

7.6 CAR POWER SUPPLY ................................................................................................................. 50

7.7 SUBSTITUTION-BATTERY ........................................................................................................... 50

7.8 TT13 MECHANICAL DOCKING ADAPTER ......................................................................................... 51

7.9 TABLE STAND ......................................................................................................................... 53

7.10 WALL BRACKET ....................................................................................................................... 54

7.11 ITC1013 SUBSTITUTION PACK OF TOUCH STYLUS ........................................................................... 54

7.12 3 POINT CORD ........................................................................................................................ 55

7.14 HAND GRIFF ........................................................................................................................... 59

7.16 ODU 10POL TO RS232 ADAPTERCABLE 1M ................................................................................... 61

7.17 PROTECTION BEZEL .................................................................................................................. 61

Tablet PCs ITC1013

8 CERTIFICATIONS ..................................................................................................................... 62

8.1 CERTIFICATIONS / TESTS ........................................................................................................... 62

8.2 ELECTROMAGNETIC COMPATIBILITY (EMC) .................................................................................... 62

9 TECHNICAL DETAILS ................................................................................................................. 63

9.1 DISPLAY DATA ........................................................................................................................ 63

9.2 COMPUTER DATA ..................................................................................................................... 63

9.3 GENERAL DATA ........................................................................................................................ 63

10 SERVICE AND SUPPORT ............................................................................................................ 64

10.1 ADS-TEC SUPPORT ................................................................................................................... 64

10.2 COMPANY ADDRESS .................................................................................................................. 64

11 COMPONENT REPLACEMENT ....................................................................................................... 65

11.1 OPENING THE SERVICE SLOT ....................................................................................................... 65

11.2 HDD/SSD (MASS-STORAGE DEVICE) REPLACEMENT .......................................................................... 67

11.3 REPLACING THE LITHIUM BATTERY ................................................................................................ 68

12 CE CONFORMITY DECLARATION .................................................................................................. 69

ablet PCs ITC1013

BOUT U

ads-tec GmbH Raiffeisenstr. 14

D-70771 Leinfelden Tel: +49 711 458 Fax: +49 711 458 www.ads-tec.com

Echterdingen

4-0 4-990

ads-tec GmbH provi technology, up-to-d technolo

y, data pr

des lar

e enterprises and globally active corpora

ate know-how and comprehensive services in t

cessing technology and systems engineering.

ions with cutting edge

he area of automation

ads-tec GmbH impl specialized in handli

ments full automation solutions from planning t

ng and material handling technologies.

commissioning and is

The data systems range of industrial

ivision develops and produces PC based soluti

Cs, thin clients and embedded systems.

ns and offers a broad

ads-tec is speciali develops software t

ed in modifying and optimizing embedded o

ols to complement its hardware platforms.

peratin

systems and

1 REMARKS

1.1 RELEVANT DATA COMMUNICATION WITH THE DEVICE

The following documents are essential for setting up and operating this device:

SER MANUAL:

Contains information for installation, commissioning and operating the device along with

1.2 DESCRIPTION OF THE WARNING SYMBOLS USED IN THIS GUIDE

technical data of the device hardware.

Warning:

The “Warning” symbol precedes warnings on uses or operations that might either lead to personal injury and/or hazards, or to any hardware and software damages.

Note:

This Symbol indicates special notes, terms and/or conditions that strictly need to be observed to ensure optimised and/or zero-defect operations. It also precedes tips and suggestions for efficient unit implementation and software optimisation.

Tablet PCs ITC1013

1.3 DATA, IMAGES, AMENDMENTS AND VARIATIONS

All texts, data and figures are non-binding. All these materials are subject to modification due to technological advances. Our products comply with all provisions and requirements of the legislation at the point in time when the products leave our company premises. The operator/operating company bears sole responsibility for the compliance with any consecutive new technological development or adherence to any consecutive new legislatory provision, as well as for the observance of their obligation as the operator/operating company.

1.4 TRADEMARKS

It is hereby notified that any software and/or hardware trademarks further to any company brand names as mentioned in this User’s Guide are all strictly subject to the various trademark, brand name and patent protection rights.

Windows

Intel

, Pentium®, Atom™ , Core™2 are registered trademarks of Intel Corp.

CompactFlash™ and CF™ are registered trademarks of SanDisk Corp.

RITTAL

is a registered trademark of the Rittal Werk Rudolf Loh GmbH & Co. KG.

Any further additional trademarks and/or brand names herein, be they domestic or international, are hereby duly acknowledged.

, Windows® CE are registered trademarks of Microsoft Corp.

, PS/2® and VGA® are registered trademarks of IBM Corp.

IBM

ablet PCs ITC1013

1.5 COPYRIGHT

This User’s Guide inclusive of all the images it contains is entirely proprietary and subject to copyright. Any irregular use of this Guide by third parties infringing copyright terms is thus strictly forbidden. Reproduction, translation, as well as electronic and photographic image storage and/or amendment processes, are subject to prior written authorisation directly by M/s. ads-tec GmbH.

1.6 CERTIFICATIONS / TESTS

Any violation and infringement thereto will be held liable for compensation of all damages.

The product is compliant with section ITC1013 CE Declaration listed documents / standards.

Warning:

This equipment belongs to class A. It can cause interference in domestic areas. Should this happen, the operator might be required to take appropriate preventive measures.

1.7 SCOPE OF DELIVERY

The following components are included in the scope of delivery:

• 1 x device

• 1 x 20V DC power supply unit

• 2 x batteries

S AN OPTION:

• 1 x DVD drive, external

• 1 x transport case

2 OPERATING INSTRUCTIONS

This device contains electrical voltages and extremely sensitive components. The manufacturer, or a service partner authorised by the manufacturer, should be consulted if you plan to make any modifications. For this type of work, the device must be switched off at the mains and the power lead must be disconnected. Suitable measures for avoiding electrostatic discharge towards parts of the components when touching the equipment must be taken. If the device is opened by an unauthorised person, hazards for the user might arise and any warranty claim will cease.

General instructions:

• All users must read this manual and have access to it at all times.

• Installation, commissioning and operation may only be carried out by trained and

qualified staff.

• The security instructions and the manual itself must be observed by all persons

who work with this device.

• At the location of use the valid guidelines and regulations for accident prevention

must be observed.

• The manual contains the most important instructions on how to use this device in

a safe way.

• Appropriate storage, proper transport, installation and commissioning, as well as

careful operation are prerequisites for ensuring safe and proper operation of the device.

Tablet PCs ITC1013

Warning:

Any leads (e.g. power leads, interface cables) may only be connected if the device is switched off in order to avoid damaging the device.

2.1 OPERATING LOCATION

This device is designed for professional and portable use indoors and outdoors. You have to take care that the environmental conditions specified in the technical data specification are met.

Warning:

The device may only be switched on after acclimatising to the ambient temperature in order to avoid condensate accumulation. The same applies if the device has previously been exposed to extreme temperature variations.

To avoid overheating in operation: The device must not be exposed to direct radiation by sunlight or any other light or heat source.

2.2 DAMAGES DUE TO IMPROPER USE

Should the service system have evident signs of damages incurred e.g. due to wrong operation or storage conditions or due to improper unit use, the unit must be decommissioned or scrapped. Ensure that it is safe from accidental re-implementation.

ablet PCs ITC1013

2.3 WARRANTY / REPAIRS

During the unit warranty period, any repairs thereto must strictly be conducted solely by the manufacturer or by service personnel that has been duly authorised by the

2.4 HANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES

manufacturer.

This device contains a lithium battery to supply the systemclock until there is no power supply connected. Depending on exposure, the battery has a lifetime of 3-5 years.

Note:

High thermal exposure will age the battery faster.

Warning:

By using the wrong types of batteries, there is acute danger of explosion.

Warning:

Lithium batteries should not be exposed to fire, soldered, recharged, opened, shortcircuited, reversed or heated above 100 °C and they should be disposed of properly as well as protected against sunlight, moisture and condensation.

The lithium battery can only be replaced by the same type or a type recommended by the manufacturer.

The used lithium battery should be disposed of in accordance with local legal regulations.

2.5 SAFETY INSTRUCTIONS

Warning:

All unit assembly operations must be strictly conducted only under safe, secure and zeropotential conditions.

Special Note:

When handling parts and components susceptible to electrical discharge, please accurately observe all the relevant safety provisions.

(DIN EN 61340-5-1 / DIN EN 61340-5-2 refers)

2.6 EXTERNAL DEVICE DIMENSIONS

Tablet PCs ITC1013

ablet PCs ITC1013

3 COMMISSIONING

The power supply connection and interfaces of this device are installed at the side of case. All supply leads and all required data leads have to be connected before starting commissioning.

Warning:

The device must be switched off before connecting or disconnecting any cables in order to prevent damage to the electronics!

The device may only be switched on after acclimatising to the ambient temperature in order to avoid condensate accumulation. Make sure to meet the permissible voltage requirements for this device.

After switching off and before switching on you must wait for at least 10 seconds.

Note:

The screen of a data cable must always be connected with the connector housing (EMC). Under the embedded operating system, interfaces must explicitly be enabled and required

drivers must be installed in order to be able to use them.

3.1 AVAILABLE INTERFACES

3.2 READINESS FOR OPERATION CHECKS

Accurately check the unit for any hidden damages possibly incurred during improper transport and/or handling or wrong operation site and/or storage conditions (e.g. smoke emissions or formation by the unit, etc.). If any damages are found, the unit must be decommissioned or scrapped. Ensure that it is safe from accidental re-implementation.

3.3 TOUCHSCREEN

The control system is equipped with an analogue, resistive touchscreen. The driver software required for its use is already integrated in the respective operating system.

OUCH STYLUS

Note:

This device is equipped with a supplied touch stylus for comfortably operating the touchscreen. This stylus should be used for all works on the device in order to avoid damage to the display.

Tablet PCs ITC1013

ablet PCs ITC1013

4 FRONT PANEL FUNCTIONS

4.1 STATUS INDICATORS

This device is equipped with different status LEDs in the front. These LEDs indicate current events, like the system activity state, the current accumulator charge status and WLAN activities.

SYSTEM LED INDICATORS DISPLAY

BEHAVIOUR

ESCRIPTION

- The device is not connected to any power supply (power adapter/accumulator)

Static The device is connected to a power

supply (power adapter/accumulator) and switched on

Flashes The device is in suspend mode (this

mode can be set up using the operating system, re-activation via power button)

Static

Device is accessing the HDD

POWER LED INDICATORS

- Device is not connected to any power

supply

Static Device is supplied by the charged

accumulator

Static Device is supplied from an external

power supply

Flashes Internal accumulators of the device are

charged (device must be connected to a power supply (power adapter)

Static Device works with the accumulators'

residual capacity

Tablet PCs ITC1013

WLAN LED INDICATORS

Static Device is not connected with a WLAN

network

Static Device is connected with a WLAN

network

Flashes Device is connected with a WLAN

network and has data traffic

BLUETOOTH

INDICATORS

LED

Static

Bluetooth module is disabled.

Static

Bluetooth module is enabled.

Flashes

Device is connected with a Bluetooth subscriber and has data traffic

ablet PCs ITC1013

4.2 FRONT CONTROL KEYS

The keys on the front panel are occupied with the following functions by a specific driver in the soft keyboard:

YMBOL: FUNCTION:

ON / OFF pushbutton for the device (approx. 0,5 seconds delayed)

Shift key (SHIFT) for activating the second keyboard level. This key must be pressed simultaneously with the desired function key

Level 1: Change task (Alt+ESC) in Windows Level 2:

Increase the system volume

Level 1: Switch from Potrait view to Landscape view Level 2:

Decrease the system volume

Level 1: Right mouse-key function Level 2:

Increase display brightness

Level 1: Activate and deactivate the soft keyboard for letter/character input

using the touchscreen. Level 2:

Decrease display brightness

Tablet PCs ITC1013

Warning:

The front control keys should not be operated with a touch stylus but with the fingers, only.

Note:

All function keys in the front panel, except for the ON / OFF pushbutton and the Fn button, have 2 function levels each. The primary function is activated by simply pushing the respective key. The second function level (small symbol to the top right) can be activated each time by pushing the Fn key first, and then additionally pushing the desired function key. It is essential to keep the Fn key always pushed in order to activate the second function level.

Note:

If the software keyboard is not installed, only the functions for display settings and volume control are active. The controller display will not be output on the display, in this case. Above described functions are pre-set ex works.

ablet PCs ITC1013

5 INTERFACES

5.1 20V DC POWER SUPPLY

ECHNICAL DATA OF THE POWER ADAPTER

• Power consumption: Max. 70 Watts

• Input voltage: 100…240 V AC

• Mains frequency: 50…60Hz

• Current consumption: 3.5A (230V AC)

• Max. switch-on current: < 60A (230V AC)

Note:

The typical power consumption of this device is indicated in the "Technical details" chapter.

5.2 14.4V DC BATTERY OPERATING MODE

The device is equipped with two batteries slots, by means of which the device can be supplied with power, alternatively. It is provided with a hot swap function which allows you to replace the batteries without rebooting.

The batteries are automatically charged in mains operation (20V DC).

Note:

If both batteries are to be replaced while operating the unit, power supply must be ensured by attaching the supplied power adapter. If you want to replace just one battery, you can do this without attaching an external power supply.

tec GmbH • Raiffeisenstr

Tablet PCs ITC1013

ATTERY STATUS R

The TT13 batteri

EPLACEMEN

s can be removed by using a mechanical eje

tor on the back of the

device.

The batteries stat display will light scale from 0 to 1 is green, it shows battery status ca

s can be retrieved by pushing a button on the

p for a few seconds and show the current batt

0. If the display lights red, this represents a we that the battery is fully charged. If the device i be retrieved by using the supplied Battery In

batteries. The batteries ries charge status on a

k battery. If the display

in operating mode, the

ormation & Diagnostics

Tool.

Note:

The "Hardwar Diagnostics Tool the unit.

specific software” chapter describes the

which can be used for retrieving the accumula

Battery Information &

r status while operating

-Echterdingen

ablet PCs ITC1013

5.3 USB CONNECTIONS

The USB interfaces are used for connecting peripherals with USB connection. The interfaces comply with the USB 2.0 standard.

PIN NUMBER SIGNAL NAME

VDC

D -

D+

GND

Note:

The two side USB ports together have a current limit of 1.5A. This allows trouble-free operation of external devices, like an external DVD drive. The in-depth USB interface is designed according to the standard for 0.5A.

5.4 ODU-INTERFACE (OPTIONAL)

By using the SD Connector, the device can be connected to an Ethernet network (10/100 Mbit). Data throughputs of 10MB can be achieved with a maximum cable length of 5m.

Note:

This interface does not allow booting via the network. If you want to boot the device via the network connection, we recommend using the LAN interface.

PIN-OUT: (LAN)

Tablet PCs ITC1013

PIN-NUMBER SIGNAL NAME

RxD+

RxD-

TxD+

TxD-

IN-OUT: USB

PIN-NUMBER SIGNAL NAME

Data-

Data+

GND

VCC

ablet PCs ITC1013

PIN-OUT: RS232

PIN-NUMBER SIGNAL NAME

DCD

RxD

TxD

DTR

GND

DSR

RTS

CTS

The SD Connect cable must be connected so that the red markers match.

For disconnecting the SD Connect cable, it must be pulled rearwards in the area marked in green. This loosens the snap-in mechanism at the end of the plug.

Note:

The interface is always shown in the network connections, even if the interface is not available regarding the configuration of the device. Functionality is only given, when a interface is available.

+ 48 hidden pages

ADS-TEC ITC1013 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

1 REMARKS

1.1 RELEVANT DATA COMMUNICATION WITH THE DEVICE

1.2 DESCRIPTION OF THE WARNING SYMBOLS USED IN THIS GUIDE

1.3 DATA, IMAGES, AMENDMENTS AND VARIATIONS

1.4 TRADEMARKS

1.5 COPYRIGHT

1.6 CERTIFICATIONS / TESTS

1.7 SCOPE OF DELIVERY

2 OPERATING INSTRUCTIONS

2.1 OPERATING LOCATION

2.2 DAMAGES DUE TO IMPROPER USE

2.3 WARRANTY / REPAIRS

2.4 HANDLING AND PROPER DISPOSAL OF LITHIUM BATTERIES

2.5 SAFETY INSTRUCTIONS

2.6 EXTERNAL DEVICE DIMENSIONS

3 COMMISSIONING

3.1 AVAILABLE INTERFACES

3.2 READINESS FOR OPERATION CHECKS

3.3 TOUCHSCREEN

4 FRONT PANEL FUNCTIONS

4.1 STATUS INDICATORS

4.2 FRONT CONTROL KEYS

5 INTERFACES

5.1 20V DC POWER SUPPLY

5.2 14.4V DC BATTERY OPERATING MODE

5.3 USB CONNECTIONS

5.4 ODU-INTERFACE (OPTIONAL)