Advanced AMS26
Monolithic VOLTAGE DETECTOR
Systems
FEATURES APPLICATIONS
•• Very Low Supply Current •• CPU and Logic Circuit Reset
•• Wide Operating Voltage Range •• Portable and Battery Powered Equipment
•• 2% Precision Voltage Detection •• Memory Battery Back-Up Circuit
•• Detection Threshold from 2V to 6V in 0.1V increments •• Window Comparator
•• 5mA Sink Current Capability •• Cellular Phones
•• 5% Typical Hysteresis •• Pagers
GENERAL DESCRIPTION
The AMS26 series are voltage detector ICs featuring a high accuracy detector threshold of ±2.0% and ultra-low supply
current. Internal circuit contains a precision voltage reference, a comparator, resistor network, and an output driver. The
AMS26 has an N-channel open drain output.
The detector threshold is set from 2.0V to 6.0V in 0.1V increments, thus making it easy to use in a variety of supervisory
applications including microprocessor reset circuits, memory battery back-up circuit, battery checker, power failure detector
and portable and battery powered electronics.
AMS26 is available in TO-92 and the sub-miniature 3-pin SOT-23 surface mount package.
ORDERING INFORMATION
OUTPUT PACKAGE TYPE OPERATING
TYPE
TO-92 3 LEAD SOT-23
TEMPERATURE RANGE
OPEN DRAIN AMS26N-XA AMS26M-XA
X= Detector Threshold Setting.
PIN CONNECTIONS
TO-92 3L SOT-23
Plastic Package (N) (M)
V
DD
1 2 3
V
OUT
Bottom View Top View
GND
V
DD
V
GND
OUT
-30 to +80° C
Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140
AMS26
ABSOLUTE MAXIMUM RATINGS (Note 1)
Supply Voltage 16V Power Dissipation : TO-92 package 300mW
Output Voltage V
Output Current 70mA Storage Temperature
Operating Temperature Range
ELECTRICAL CHARACTERISTICS
Electrical Characteristics at TA=25°C, unless otherwise noted.
- 0.3V toVDD+0.3V SOT-23 package 150mW
SS
-40°C to +125°C
-30°C to +80°C
Lead Temperature (Soldering 10 sec)
230°C
PARAMETER CONDITIONS
(Note 2)
Detector Threshold (V
Detector Threshold Hysteresis (V
Supply Current VIN = 2.0V 1.0 3.0
Operating Voltage 1.50
Output Delay Time 100
Detector Threshold Temperature
Coefficient
Note 1: Absolute Maximum Ratings are limits beyond which damage to the device may occur. For guaranteed performance limits and associated test conditions, see
the Electrical Characteristics tables.
) -2.0 +2.0 %
DET
VIN = 3.0V 1.3 3.4
VIN = 4.0V 1.6 3.8
VIN = 5.0V 2.0 4.2
-30°C≤TA≤+80°C
Min.
) * 3% (V
DET
AMS26-X
Typ.
± 100 ppm/°C
Max.
) * 7% V
DET
10.00 V
Units
µA
µs
BLOCK DIAGRAM
V
2
DD
OUT
1
+
-
V
REF
3
GND
Advanced Monolithic Systems, Inc. 6680B Sierra Lane, Dublin, CA 94568 Phone (925) 556-9090 Fax (925) 556-9140