
Safety regulations
ADMIRAL Couplers can only be installed or used by competent
and/or qualified personnel.
Before using a Coupler you should inspect them visually for
any damage. If the coupler is damaged you should be taking
it out of service and return it to your local ADMIRAL dealer for
inspection.
ADMIRAL Coupler RIHAHCA35 is designed to specifically attach
to round tubes of ø 48-50mm and is forbidden to be used in
falsework structures.
During installation of the Coupler you must take care not
to overtighten the wing nut or wing handle. This to prevent
damage to the tube and/or the Clamp/Coupler. If you use
only one wing nut or wing handle, it is preferred to only hand
tighten it. When you use an additional nut, below the wing nut
or wing handle, follow this torque setting: Max. 22-25 N-m.
ADMIRAL Coupler RIHAHCA35 comes with an indicated WLL of
100kg. This WLL may not be exceeded or any other max. load
given as instructed during installation.
Couplers that are being used in combination with accessories,
should never exceed the max. load of the used accessory.
Half coupler
48-50mm slim
▼ ▼
▼ ▼
ADMIRAL CODE:
EAN
USER MANUAL
Half coupler
48-50mm slim
WLL
kg
100
WARNING
Always make sure you double lock
the ADMIRAL Couplers, with e.g. two nuts.
A product of ADMIRAL
Josink Kolkweg 10, 7545 PR Enschede
The Netherlands, +31 534 301 201
www.admiralstaging.com

Half coupler
Ø 32 - 35mm
WLL 75kg
Half coupler
with lifting eye
Ø 48 - 51mm
WLL 200kg
ADMIRAL CLAMPS AND COUPLERS
Admiral supplies a vast array of clamps and couplers,
from aluminum half couplers to swivel couplers
with a WLL up to 750kg.
Qwiqr
Ø 48 - 50mm
WLL 100kg
Ø 48 - 51mm
WLL 200kg
Ø 48 - 51mm
WLL 200kg
Ø 48 - 51mm
WLL 500kg
Ø 48 - 51mm
WLL 750kg
Swiffel coupler
Ø 48 - 50mm
WLL 100kg
Ø 48 - 51mm
WLL 200kg
Ø 48 - 51mm
WLL 500kg
Quick coupler
Ø 48 - 51mm
WLL 250kg
Selflock coupler
Easy
Ø 48 - 51mm
WLL 250kg
Shorty
Ø 48 - 51mm
WLL 100kg
C-clamp
Ø 48 - 50mm
23cm/40cm/60cm
G-clamp
Ø 48 - 50mm
23cm/40cm/60cm
G-clamp straight
Ø 48 - 50mm
WLL 50kg
With the Qwiqr you connect
your hooks onto a luminaire
with only one click.
Slide the hook into the
housing and click!
Safety cable
Mount the safety cable in a
small loop to absorb the
weight when falling.
Accident avoided.
60 cm / 100 cm
complies with
BGV-C1