
SCOPE
This grid bracket is designed to mount two aluminum 50 mm
tubes together in a 90 degrees angle.
WARNING
Inspect this product before use. In case of material
defects, this product should be taken out of service.
MAINTENANCE
Please do not use aggressive cleaning agents such as
solvents and/or corrosive substances.
Clean the product with a cloth with a so detergent.
Aer cleaning the product, dry it with a so cloth.
Check the product for worn, tear and/or lost items.
GRID BRACKET 90
USER MANUAL
Admiral Staging the Netherlands
www.admiralstaging.com +31 534 301 201
BUILD A GRID
1
2
O
3
WARNING
By wear and/or missing of the proper components this
product should be immediately taken out of service.
Consult your supplier for advise.
Repair / maintenance is only permitted by a qualified
person. In case of doubt, consult your supplier.
INSTALL
STEP 1
Hang the bracket onto
the upper tube.
STEP 2
Grid bracket
90 degrees
5
6
7
Grid tube
1
Grid tube connector
2
Cover for grid tube
3
Grid bracket
4
Grid wall Bracket
5
Bracket for assembly
6
gutter onto gridtube
Slide the lower tube into
the bracket .
STEP 3
Screw the locking plate
onto the bracket using
self locking nuts.