Admiral Craft IND-WOK208V Owner's Manual

IND-WOK208V

Induction Cooker

This manual contains important information regarding your

Admiral Craft unit. Please read this manual thoroughly prior to

equipment set-up, operation and maintenance. Failure to

comply with regular maintenance guidelines outlined in this

manual may void the warranty. MUST READ!!!

WARNINGS



This unit is intended to be used with induction ready cookware only



Do not plug into an electrical with wet hands EVER

 Plug only into a 3-hole grounded electrical outlet
 Do not use this unit for anything other than intended use
 Ensure that the designated power supply is adequate for continual usage and the voltage is correct
 Do not use if unit has a damaged cord or plug, in the event the appliance malfunctions, or has been

damaged in any manner

 Any incorrect installation, alterations, adjustments and/or improper maintenance can lead to property loss

and injury. All repairs should be done by authorized professionals only

 Keep children and animals away from unit
 Do not operate unattended
 Always use on a firm, dry and level surface at least 12” from walls or any other obstruction
 Do not use with an empty pot or overheat
 Do not place metallic objects such as knives, forks, spoons, lids, cans or aluminum foil on plate
 Do not use on carpet, tablecloth or any other low-heat-resistant surface
 Do not place the cooker close to the objects which are affected by magnets, such as: radios, televisions,

credit cards
Unplug appliance when it is not in use



Do not use outdoors



Allow unit to fully cool and unplug before attempting to move or clean



Pressing the on/off button at any time during operation will shut the unit off



There is an automatic shutoff which will take effect after 2 hours of non-operation



HOW TO USE

1. Place suitable cookware on the induction cooker plate. Connect the plug to an appropriate socket.

Once connected, the ON/OFF light will display, indicating the power is connected normally.

2. After pressing ON/OFF the POWER light will display, indicating that the induction cooker is

heating up; the default power heating level is 2000W. Adjust the power from 500W-3000W by
turning the knob.

3. After pressing the FUNCTION button, the function between POWER, TEMP and TIMER can be

changed. The selected light will display. Temperature can be adjusted from 140℉ up to 460℉ by
turning the knob. The maximum temperature of the glass plate is 460℉. If overheating, the unit will
shut off automatically.

4. Adjust the time from 0 minutes to 170 minutes by turning the knob on the Time function.

5. When pressing ON/OFF during usage, the induction cooker will stop working immediately. Once

not in use, the fan will cool down the unit for one minute, and then will be off.

6. The induction cooker will shut off automatically if there is no operation within 2 hours.

CLEANING - NOTE: To maintain cleanliness and increase service life, this induction cooker should be cleaned
daily. Do not immerse the unit in water or any other liquid. If liquid enters the unit it may cause a short circuit or
electrical shock

1. Before cleaning or attempting to move, unplug and let the unit cool completely

2. Wipe the entire unit with a clean soft cloth and mild soap

3. To avoid damage, do not use abrasive cleaners or scouring pads

4. Use a vacuum cleaner to clean any dirt from the air intake and exhaust valve