Manual Rev 2.10: July 19, 2001
Part No : 50-11119-201
The information in this document is subject to change without prior notice in
order to improve reliability, design and function and does not represent a
commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability to
use the product or documentation, even if advised of the possibility of such
damages.
This document contains proprietary information protected by copyright. All
rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of the manufacturer.
Trademarks
C514, C518, C485, C584, C588, C888, C960, C990, C990D, F641, F642,
C584XB and C588XB are trademarks of ADLINK Technology Inc.,
MS-DOS, Windows 95, Windows NT are registered trademark of Microsoft
Corporation. Intel is a registered trademark of Intel Corporation. Other
product names mentioned herein are used for identification purposes only
and may be trademarks and/or registered trademarks of their respective
companies.
Getting service from ADLINK
Customer Satisfaction is always the most important thing for ADLINK Tech
Inc. If you need any help or service, please contact us and get it.
Web Site http://www.adlink.com.tw
Sales and
Service
Technical NuDAQ nudaq@adlink.com.tw
Support NuDAM nudam@adlink.com.tw
TEL +886-2-82265877 FAX +886-2-82265717
Address 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235, Taiwan, R.O.C.
service@adlink.com.tw
NuIPC nuipc@adlink.com.tw
NuPRO nupro@adlink.com.tw
Software sw@adlink.com.tw
AMB amb@adlink.com.tw
Please inform us of your detailed information for a prompt, satisfactory and
constant service.
Company/Organization
Contact Person
E -mail Address
Address
Country
TEL
Web Sit
• The serial communication cards are intelligent serial input/output
multi-port controller cards which are suitable to PC AT with PCI bus
machine. The cards can reduce the interval for serial
communication controller to interrupt main CPU on the mainboard
to improve the whole syst em performance.
• Traditionally, the serial communication controller will interrupt the
MPU character by character. This action will waste MPU processing
time and drop the system computing power. If the MPU is
processing some non-interrupted task, then the serial controller will
overrun and data lost.
• The serial communication interface series can support buffer
capability or local processor and dual port RAM in each port’s
transmit and receive channel simultaneously. This capability will
reduce the number of interrupt and increase the non-interrupt task’s
interval.
• The serial communication interface series used ASIC PCI controller
to interface the board to PCI bus. The ASIC fully implement the PCI
local bus specification Rev. 2.1. All bus relative configurat ions, such
as base memory address and interrupt assignment, are
automatically controlled by BIOS software. It does not need any
user interaction and pre-study for the configurations. This removes
the burden of searching for a conflict-free configuration.
Introduction • 1
1.2 Overview of C514
1.2.1 What is C514?
The C514 is an enhanced four ports serial communication card used for PC
with PCI bus. It includes a PGA to support the serial communication
controller and a 37-pin connector to connect external I/O port.
The expansion cable has four standard DB25 connectors and one DB37
connector to connect to C514 interface card.
1.2.2 Feature of C514
♦ PCI Rev.2.1 Plug and Play
♦ IRQ and IO address automatically assigned by PCI plug-n-play
♦ 4 communication ports intelligent buffer
♦ 3 RS-232C compatible ports plus 1 isolated RS-422/485 interface
♦ Suitable for modems, data display, data collection,
telecommunication
♦ Supports up to 8 cards/32 ports per system
♦ Supports Windows 95/98, NT operation system
1.2.3 Specification of C514
♦ Compliant with PCI Spec.2.1
♦ Serial communication controller:
• 16C550A compatible
• 1.8432 ~ 7.3728 MHz
• Baud programmable upto 112Kbps ~ 448Kbps
♦ System IO mapping:
• Assigned by PCI BIOS
• Shared IRQ
2 • Introduction
♦ Flow control
• Xon/Xoff control
• RTS/CTS control
♦ Port Capability:
• 3 independent RS-232C compatible ports
• 1 isolated RS-422/485 port with 500Vdc isolation voltage
• Max. port per system: 32 (8 cards)
♦ Operation System Compatibility: Windows 95/98/NT
• Connector : DB37 female connector
• Cable : External cable with 4 standard DB25 male connector
Note: Please refers to 3.2 for pins connect of RS-485.
4 • Introduction
1.3 Overview of C584
1.3.1 What is C584?
The C584 is an enhanced four ports serial communication card used for PC
with PCI bus. It includes a PGA to support the serial communication
controller and a 37-pin connector to connect external I/O port.
The expansion cable has four standard DB25 connectors and one DB37
connector to connect to C584 interface card. User may also use one DB37
to DB37 cable to connect between one C584 and C584XB for providing 4
channel isolated RS-232/422/485 interface.
1.3.2 Feature of C584
• PCI Rev.2.1 Plug and Play
• IRQ and IO address automatically assigned by PCI plug-n-play
• 4 communication ports intelligent buffer
• Suitable for modems, data display, data collection,
telecom munication
• Supports up to 2 cards/8 ports per system
• Supports Windows 95/98, NT operation system
• Optional isolated RS-232/422/485 interface for each port
independently
• One jumper to assign board & COM number .No problem to fix COM
number for each card.
• Supports surge protector in TXD/RXD signal line
1.3.3 Specification of C584
♦ Compliant with PCI Spec.2.1
♦ Serial communication controller:
• 16C550A compatible
• 1.8432 ~ 7.3728 MHz
Introduction • 5
♦ System IO mapping:
• Assigned by PCI BIOS
• Shared IRQ
♦ Flow control
• Xon/Xoff control
• RTS/CTS control
♦ Port Capability:
• 4 independent RS-232C compatible ports
• Optional external C584XB box for extending to 4 isolated
RS-232/422/485 port
• Max. port per system: 8 (2 cards)
♦ Baud rate: Each port can be configured to 50~115,200 bps
• Operation System Compatibility: Windows 95/98/NT
• Connector : DB37 female connector
• Cable : External cable with 4 standard DB25 male connector
The C518 is an enhanced eight ports serial communication card used for
PC with PCI bus. It includes a PGA to support the serial commun ication
controller and a 62-pin connector to connect external I/O port.
The expansion cable has eight standard DB25 connectors and one DB62
connector to connect to C518 interface card.
1.4.2 Feature of C518
• PCI Rev.2.1 Plug and Play
• IRQ and IO address aut omatically assigned by PCI plug-n-play
• 8 communication ports intelligent buffer
• 7 RS-232C compatible ports plus 1 isolated RS-422/485 interface
• Suitable for modems, data display, data collection,
telecommunication
• Supports up to 8 cards/64 ports per system
• Supports Windows 95/98, NT operation system
• One DIP switch to assign board & COM number. No problem to fix
COM number for each card
1.4.3 Specification of C518
♦ Compliant with PCI Spec.2.1
♦ Serial communication controller:
• 16C550A compatible
• 1.8432 ~ 7.3728 MHz
• Baud programmable upto 112Kbps ~ 448Kbps
♦ System IO mapping:
• Assigned by PCI BIOS
8 • Introduction
• Shared IRQ
♦ Flow control
• Xon/Xoff control
• RTS/CTS control
♦ Port Capability:
• 7 independent RS-232C compatible ports
• 1 isolated RS-422/485 port with 500Vdc isolation voltage
• Max. port per system: 64 (8 cards)
♦ Operation System Compatibility: Windows 95/98/NT
♦ Connector: DB62 female connector
♦ Cable: External cable with 8 standard DB25 male connector
♦ Operating temperature: 0 ~ 55 °C
♦ Storage temperature: -20 ~ 65 ° C
♦ Humidity: 10% ~ 95%, non-condensing
♦ Power consumption: +5V @ 1400mA typical
Introduction • 9
Loading...
+ 34 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.