Adj Micro Star User Manual [ru]

Micro Star General Introduction

Unpacking: Thank you for purchasing the Micro Star by American DJ®.

Every Micro Star has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your xture for any damage and be
sure all equipment necessary to operate the unit has arrived intact. In
the event damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Please
do not return this unit to your dealer without contacting customer sup­port rst.

Introduction: The Micro Star is an simple, small, bright, green and

red laser fixture. The Micro Star produces more than 200 beams with
star patterns that may be projected on a wall, ceiling, or dance floor.
The Micro Star is a stand alone fixture with 2 operating modes; sound
active and auto. The Micro Star’s compact, light weight case design
make it ideal for mobile entertainers, bands, night clubs and bar. For

best results use fog or special effects smoke to enhance the beams
projections.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com­ments or suggestions. For service related issue please contact Ameri-
can DJ®. Service Hours are Monday through Friday 9:00 a.m. to 4:30
p.m. Pacic Standard Time.
Voice: [phone]
Fax: [phone]
E-mail: [e-mail]

To purchase parts online visit http://parts.americandj.com

11/10

User Instructions

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war­ranty. In the unlikely event your unit may require service please contact
American DJ customer support.

PLEASE recycle the shipping carton whenever possible.

©American DJ® - www.americandj.com - Micro Star Instruction Manual Page 2

Micro Star General Instructions Micro Star Safety Precautions

DANGER

VIS IBL E LA SER RA DIATI ON

-AVO ID DIRE CT E YE EXP OSUR E

LAS ER DIOD E
WA V ELEN GTH : 6 35~ 650 nm
Max Output : <4.9mW
Class IIIa Laser Product

!

!

Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte­nance of this unit. Please keep this manual with the unit, for future
reference.

CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.

Micro Star Features

• 30mW Green Laser

• 80mW Red Laser

• 2 Operating Modes - Sound Active Mode & Auto Mode

• RF Wireless Remote Control (Included)

• Dual Hanging Bracket

Micro Star Warranty Registration

The Micro Star carries a 90 day limited warranty. Please fill out the
enclosed warranty card to validate your purchase. All returned service
items whether under warranty or not, must be freight pre-paid and
accompany a return authorization (R.A.) number. If the unit is under
warranty you must provide a copy of your proof of purchase invoice.
Please contact American DJ® customer support for a R.A. number.

• To reduce the risk of electrical shock or re, do not expose this unit
rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break off the ground prong from the
electrical cord. This prong is used to reduce the risk of electrical
shock and re in case of an internal short. Do not attempt to oper­ ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user
serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out­ doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked
on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 9 for cleaning details.

• Heat -The appliance should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.
C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a
marked change in performance.

©American DJ® - www.americandj.com - Micro Star Instruction Manual Page 4©American DJ® - www.americandj.com - Micro Star Instruction Manual Page 3