Adj Micro Hypnotic User Manual [ru]

Micro Hypnotic General Introduction

Unpacking: Thank you for purchasing the Micro Hypnotic by Ameri-

can DJ®. Every Micro Hypnotic has been thoroughly tested and has
been shipped in perfect operating condition. Carefully check the ship­ping carton for damage that may have occurred during shipping. If the

carton appears to be damaged, carefully inspect your xture for any

damage and be sure all equipment necessary to operate the unit has
arrived intact. In the event damage has been found or parts are miss­ing, please contact our toll free customer support number for further
instructions. Please do not return this unit to your dealer without con-

tacting customer support rst.

Introduction: The Micro Hypnotic is a unique mini laser that proj-

ects red and green “web type” patterns. These laser patterns may
be projected on a wall, ceiling, or dance floor. The Micro Hypnotic is
a stand alone fixture with 2 operating modes; sound active and auto.
The Micro Hypnotic’s compact, light weight case design make it ideal
for mobile entertainers, bands, night clubs and bar. For best results

use fog or special effects smoke to enhance the beams projections.

Customer Support: American DJ® provides a toll free customer sup-

port line, to provide set up help and to answer any question should
you encounter problems during your set up or initial operation. You
may also visit us on the web at www.americandj.com for any com­ments or suggestions. For service related issue please contact Ameri-
can DJ®. Service Hours are Monday through Friday 8:00 a.m. to 4:30

p.m. Pacic Standard Time.

Voice: [phone]

Fax: [phone]

E-mail: [e-mail]

To purchase parts online visit http://parts.americandj.com

8/11

User Instructions

Warning! To prevent or reduce the risk of electrical shock or re, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war­ranty. In the unlikely event your unit may require service please contact
American DJ customer support.

PLEASE recycle the shipping carton whenever possible.

©American DJ® - www.americandj.com - Micro Hypnotic Instruction Manual Page 2

Micro Hypnotic General Instructions Micro Hypnotic Safety Precautions

!

!

Please carefully read and understand the instructions in this manual
thoroughly before attempting to operate this unit. These instructions
contain important safety information regarding the use and mainte­nance of this unit. Please keep this manual with the unit, for future
reference.

CAUTION IMPORTANT! When installing this projector, make sure
that it is mounted in a manner that prevents the audience from
looking directly into the beam, and the beam from striking the
audience.

Micro Hypnotic Features

• 30mW (532nm) Green Laser

• 80mW (650nm) Red Laser

• 2 Operating Modes - Sound Active Mode & Auto Mode

• RF Wireless Remote Control (Included)

• Dual Hanging Bracket

Micro Hypnotic Warranty Registration

The Micro Hypnotic carries a 90 day limited warranty. Please fill out
the enclosed warranty card to validate your purchase. All returned
service items whether under warranty or not, must be freight pre­paid and accompany a return authorization (R.A.) number. If the unit
is under warranty you must provide a copy of your proof of purchase
invoice. Please contact American DJ® customer support for a R.A.
number.

• To reduce the risk of electrical shock or re, do not expose this unit

rain or moisture.

• Do not spill water or other liquids into or on to your unit.

• Do not attempt to remove or break o the ground prong from the

electrical cord. This prong is used to reduce the risk of electrical

shock and re in case of an internal short. Do not attempt to oper-

ate this unit if the power cord has been frayed or broken.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out-

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power cords should be routed so they are not likely to be walked

on, pinched by items placed upon or against them.

• Cleaning -The fixture should be cleaned only as recommended by
the manufacturer. See page 10 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances
(including amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the unit.

C. The unit has been exposed to rain or water.
D. The unit does not appear to operate normally or exhibits a

marked change in performance.

DANGER

VISIBLE LASER RADIATION

-AVOID DIRECT EYE EXPOSURE

LASER DIODE
WAVELENGTH : 635~650 nm
Max Output : <4.9mW
Class IIIa Laser Product

©American DJ® - www.americandj.com - Micro Hypnotic Instruction Manual Page 4©American DJ® - www.americandj.com - Micro Hypnotic Instruction Manual Page 3