ADJ 3D VISION 3D Vision_EN.pdf

3D Vision

©2016 ADJ Products, LLC all rights reserved. Information,

specifications, diagrams, images, and instructions herein are
subject to change without notice. ADJ Products, LLC logo and
identifying product names and numbers herein are trademarks
of ADJ Products, LLC. Copyright protection claimed includes all
forms and matters of copyrightable materials and information
now allowed by statutory or judicial law or hereinafter granted.
Product names used in this document may be trademarks or
registered trademarks of their respective companies and are
hereby acknowledged. All non-ADJ Products, LLC brands and
product names are trademarks or registered trademarks of their

respective companies.

ADJ Products, LLC and all affiliated companies hereby dis-

claim any and all liabilities for property, equipment, building, and
electrical damages, injuries to any persons, and direct or indi­rect economic loss associated with the use or reliance of any
information contained within this document, and/or as a result
of the improper, unsafe, unsufficient and negligent assembly,
installation, rigging, and operation of this product.

9/16

User Instructions

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC)
Saving electric energy is a key to help protecting the enviroment.
Please turn off all electrical products when they are not in use. To
avoid power consumption in idle mode, disconnect all electrical
equipment from power when not in use. Thank you!

ADJ Products, LLC - www.adj.com - 3D Vision Instruction Manual Page 2

ADJ Products, LLC - www.adj.com - 3D Vision Instruction Manual Page 3

Unpacking: Thank you for purchasing the 3D Vision by ADJ Prod-

ucts, LLC. Every 3D Vision has been thoroughly tested and has been
shipped in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your fixture for any
damage and be sure all accessories necessary to operate the unit has
arrived intact. In the case damage has been found or parts are miss­ing, please contact our toll free customer support number for further
instructions. Do not return this unit to your dealer without first contact­ing customer support.

Introduction: The 3D Vision is a Hexagonal shaped LED panel with

stunning 3D visual effects when used in multiples. This LED panel is
controlled via DMX control. Kling-Net or Art-Net can be used when
used with EZ Kling. Dynamic effects can be played on it, which makes
it a great system for DJ’s and night clubs.

Customer Support: ADJ Products, LLC provides a toll free cus-

tomer support line, to provide set up help and to answer any question
should you encounter problems during your set up or initial operation.
You may also visit us on the web at www.adj.com for any comments
or suggestions. Service Hours are Monday through Friday 8:00 a.m. to
4:30 p.m. Pacific Standard Time.

Voice: [phone]
Fax: [phone]
E-mail:

[e-mail]

To purchase parts online visit http://parts.americandj.com

Warning! To prevent or reduce the risk of electrical shock or fire, do

not expose this unit to rain or moisture.

Caution! There are no user serviceable parts inside this unit. Do not

attempt any repairs yourself, doing so will void your manufactures war­ranty. In the unlikely event your unit may require service please contact
ADJ Products, LLC.

PLEASE recycle the shipping carton when ever possible.

To optimize the performance of this product, please read these operat­ing instructions carefully to familiarize yourself with the basic operations
of this unit. These instructions contain important safety information
regarding the use and maintenance of this unit. Please keep this manual
with the unit, for future reference.

• CAT 5 Straight Network Cable included.

• 75 x 5050 SMD 3-in-1 RGB LED’s

• Safety Cable Included

The 3D Vision carries a 2 year (730 days) limited warranty. Please fill

out the enclosed warranty card to validate your purchase and war-

ranty. You may also register your product online at www. americandj.
com. All returned service items whether under warranty or not, must

be freight pre-paid and accompany a return authorization (R.A.) num­ber. If the unit is under warranty you must provide a copy of your
proof of purchase invoice. Please contact ADJ customer support for a
R.A. number.

3D Vision

Warranty Registration

3D Vision

Features

3D Vision

General Instructions

3D Vision

Introduction

ADJ Products, LLC - www.adj.com - 3D Vision Instruction Manual Page 4

ADJ Products, LLC - www.adj.com - 3D Vision Instruction Manual Page 5

• To reduce the risk of electrical shock or fire, do not expose this unit

rain or moisture

• Do not spill water or other liquids into or on to your unit.

• Be sure that the local power outlet match that of the required volt-

age for your unit.

• Do not attempt to operate this unit if the power cord has been

frayed or broken. Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used to reduce the risk
of electrical shock and fire in case of an internal short.

• Disconnect from main power before making any type of connection.

• Do not remove the cover under any conditions. There are no user

serviceable parts inside.

• Never operate this unit when it’s cover is removed.

• Never plug this unit in to a dimmer pack

• Always be sure to mount this unit in an area that will allow proper
ventilation. Allow about 6” (15cm) between this device and a wall.

• Do not attempt to operate this unit, if it becomes damaged.

• This unit is intended for indoor use only, use of this product out`

doors voids all warranties.

• During long periods of non-use, disconnect the unit’s main power.

• Always mount this unit in safe and stable matter.

• Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the unit.

• Cleaning -The fixture should be cleaned only as recommended by

the manufacturer. See page 9 for cleaning details.

• Heat -The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances (inclu­ding amplifiers) that produce heat.

• The fixture should be serviced by qualified service personnel when:

A.

The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a

marked change in performance.

Control Using a DMX Controller:

1. The 3D Vision has 9 DMX channels. See page 11for detailed
description of the DMX values and traits. See the page 7 for the
pixel layout.

1. To set a DMX address you will need to use the 3D Vision Encoder

(Sold Separately). Follow the instructions included with your 3D
Vision Encoder to set your desired DMX address.

2. When connecting to a DMX controller or using MyDMX, you will

need to use a RJ45 to 3pin adapter. This can be purchased
through ADJ.

3. Connect the first unit to the adapater and then connect to either
your DMX controller or MyDMX.

4. Follow the DMX traits on page 11 to control your unit.

Do

not

daisy-chain more than 32 Panels when connecting directly

to a DMX controller.

3D Vision

Operation

3D Vision

Safety Precautions

ADJ Products, LLC - www.adj.com - 3D Vision Instruction Manual Page 6

ADJ Products, LLC - www.adj.com - 3D Vision Instruction Manual Page 7

When installing the unit, the trussing or area of installation must be
able to hold 10 times the weight without any deformation. When
installing the unit must be secured with a secondary safety attach­ment, e.g. included safety cable. Never stand directly below the unit
when mounting, removing, or servicing the unit.

Overhead mounting requires extensive experience, including calculat­ing working load limits, installation material being used, and perodic
safety inspection of all installation material and unit. If you lack these
qualifications, do not attempt the installation yourself.

The installaiton should be checked by a skilled person once a year.

To connect your 3D Visions to one another you can use a quick
release panel lock (sold separately). To use the quick release panel
lock simply squeeze the ends of the quick release panel locks inwards
and attach to one of the six outer rigging bar attachment points. You
can use a pro clamp with 10M bolt attached to the rear middle of the
unit (as seen below) to attach to trussing. See the next page for all
rigging areas and quick release connections.

10M threaded mounting hole
(to attach pro clamp to lock on truss)

quick release panel lock
to connect adjoining panels

crosshole (to
hang on a stud or
hook)

Rigging bar attachment points

Check the rear of the unit for the word TOP to locate the top of
the unit. The top of the unit is Pixel 1.

Pixel 2

Pixel 1

Pixel 3

3D Vision

Pixel Layout

3D Vision

Mounting and Grouping

3D Vision

Mounting and Grouping

ADJ Products, LLC - www.adj.com - 3D Vision Instruction Manual Page 8

ADJ Products, LLC - www.adj.com - 3D Vision Instruction Manual Page 9

With this feature you can connect the fi es to one another

using the PowerCon input and output sockets. the quantity that

can be connected is 130 fixtures maximum @ 120V and 260 fix-

tures maximum @ 230V. After you have reached the maximum
amount of fixtures you will need to use a new power outlet. They
must be the same fixtures. DO NOT mix fixtures.

3D Vision Cleaning

Due to fog residue, smoke, and dust cleaning the internal and exter­nal optical lenses must be carried out periodically to optimize light
output.

1. Use normal glass cleaner and a soft cloth to wipe down the
outside casing.

2. Clean the external optics with glass cleaner and a soft cloth
every 20 days.

3. Always be sure to dry all parts completely before plugging
the unit back in.

Cleaning frequency depends on the environment in which the fixture
operates (i.e. smoke, fog residue, dust, dew).

80.5mm/3.16”

Listed below are a few common problems the user may encounter,
with solutions.

Unit is not receiving data;

1.

Be sure you are using a CAT 5 Straight Network cable.

If problems are not resolved; Contact ADJ for service.

1-800-322-6337

3D Vision

Trouble Shooting

3D Vision

Power Cord Daisy Chain

3D Vision

DMX Traits

3D Vision

CAD Drawing

142.8mm/5.62”

119mm/4.68”

404.7mm/15.93”

150mm/5.90” 350.7mm/13.80”

Channel

Value

Function

1

0 - 255

RED 1

0% - 100%

2

0 - 255

GREEN 1

0% - 100%

3

0 - 255

BLUE 1

0% - 100%

4

0 - 255

RED 2

0% - 100%

5

0 - 255

GREEN 2

0% - 100%

6

0 - 255

BLUE 2

0% - 100%

7

0 - 255

RED 3

0% - 100%

8

0 - 255

GREEN 3

0% - 100%

9

0 - 255

BLUE 3

0% - 100%

MANUFACTURER’S LIMITED WARRANTY

A. ADJ Products, LLC hereby warrants, to the original purchaser, ADJ Products, LLC products

to be free of manufacturing defects in material and workmanship for a prescribed period from
the date of purchase (see specific warranty period on reverse). This warranty shall be valid only if the
product is purchased within the United States of America, including possessions and
territories. It is the owner’s responsibility to establish the date and place of purchase by acceptable
evidence, at the time service is sought.

B. For warranty service you must obtain a Return Authoriz at ion number (RA#)

before sending back the product–please contact ADJ Products, LLC Service Department
at 800-322-6337. Send the product only to the ADJ Products, LLC factory. All
shipping charges must be pre-paid. If the requested repairs or service (including
parts replacement) are within the terms of this warranty, ADJ Products, LLC will pay return
shipping charges only to a designated point within the United States. If the entire instrument is
sent, it must be shipped in it’s original package. No accessories should be shipped with the product. If
any accessories are shipped with the product, ADJ Products, LLC shall have no liability whatsoever for
loss of or damage to any such accessories, nor for the safe return thereof.

C. This warranty is void if the serial number has been altered or removed; if the product is modified in any

manner which ADJ Products, LLC concludes, after inspection, affects the reliability of the product; if the
product has been repaired or serviced by anyone other than the ADJ Products, LLC factory unless prior
written authorization was issued to purchaser by ADJ Products, LLC; if the product is damaged because
not properly maintained as set forth in the instruction manual.

D. This is not a service contract, and this warranty does not include maintnance, cleaning or periodic check

up. During the period specified above, ADJ Products, LLC will replace defective parts at its expense
with new or refurbished parts, and will absorb all expenses for warranty service and repair labor by
reason of defects in material or workmanship. The sole responsibility of ADJ Products, LLC under this
warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole
discretion of ADJ Products, LLC. All products covered by this warranty were manufactured after August
15, 2012, and bear indentifying marks to that effect.

E. ADJ Products, LLC reserves the right to make changes in design and/or improvements upon its products

without any obligation to include these changes in any products theretofore manufactured.
No warranty, whether expressed or implied, is given or made with respect to any accessory supplied with

products described above. Except to the extent prohibited by applicable law, all implied warranties made
by ADJ Products, LLC in connection with this product, including warranties of merchantability or fitness,
are limited in duration to the warranty period set forth above. And no warranties, whether expressed or
implied, including warranties of merchantability or fitness, shall apply to this product after said period
has expired. The consumer’s and/or Dealer’s sole remedy shall be such repair or replacement as is
expressly provided above; and under no circumstances shall ADJ Products, LLC be liable for any loss or
damage, direct or consequential, arising out of the use of, or inability to use, this product.

This warranty is the only written warranty applicable to ADJ Products, LLC Products and
supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore
published.

MANUFACTURER’S LIMITED WARRANTY PERIODS:

• Non L.E.D. Lighting Products = 1-year (365 days) Limited Warranty (Such as: Special Effect

Lighting, Intelligent Lighting, UV lighting, Strobes, Fog Machines, Bubble Machines, Mirror Balls, Par
Cans, Trussing, Lighting Stands etc. excluding LED and lamps)

• Laser Products = 1 Year (365 Days) Limited Warranty (excluding laser diodes which have a 6 month

limited warranty)

• L.E.D. Products = 2-year (730 days) Limited Warranty (excluding batteries which have a 180 day lim-

ited warranty). Note: 2 Year Warranty only applies to purchases within the United States.

• StarTec Series = 1 Year Limited Warranty (excluding batteries which have a 180 day limited warranty).

• ADJ DMX Controllers = 2 Year (730 Days) Limited Warranty

ADJ Products, LLC - www.adj.com - 3D Vision Instruction Manual Page 10

Auto Sensing Voltage: This fixture contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged
into the power source.

Please note: Specifications and improvements in the design of

this unit and this manual are subject to change without any prior
written notice.

ADJ Products, LLC

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: [phone] / Fax: [phone]

Web: www.adj.com / E-mail: [e-mail]

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

The Netherlands

[e-mail] / www.adj.com

Tel: [phone] / Fax: [phone]

Model:

3D Vision

SPECIFICATIONS:

LEDs:

72 x 0.164W 3-in-1 LEDs

Working Position: Any safe working position

Voltage:

100V-250V, 50/60Hz

Power Draw: 13W (Full On)

Power Cord Daisy Chain:130 Units Max. (120V)

260 Units Max. (240V)

Beam Angle:

180 Degrees

Weight: 6 lbs./ 2.74Kgs.

Dimensions:

3.16” (L) x 15.93” (W) x 13.80” (H)

80.5 (L) x 404.7 (W) x 350.7 (H) mm

Warranty:

2 Year (730 days)

3D Vision

Specifications

3D Vision

Warranty